Touratech Handlebar Center Brace 22/25 290 for Vehicles with Tube Handlebars, e.g. BMW K25 R1200GS + Adventure
Product information "Touratech Handlebar Center Brace 22/25 290 for Vehicles with Tube Handlebars, e.g. BMW K25 R1200GS + Adventure"
Even on many street motorcycles with high handlebars, a brace might be needed;
for the installation of:
- Roadbook holders
- GPS devices
- Motorcycle computers
- Map bags
- and more
With our cross braces, we have filled this gap.
No complicated handlebar change is required. The brace is simply bolted on afterwards. The braces are universally applicable to handlebars with a diameter of 22-28 mm - standard handlebars made of steel or aluminum and Magura or ProTaper handlebars that taper. Finally, something can be mounted on the handlebars again. The ideal solution for occasional use or for motorcycles with unstable handlebars.
The brace is 290 mm long and anodized aluminum in its natural state.
- does not fit BMW 1200GS with I-ABS 2, e.g., R1200GS ADV - year: 2007
Also suitable for KTM Super Adventure S, R, T (from 2017)
Login
Similar Items
Handlebar riser for BMW R1200GS by 30 mm. With this handlebar riser, you can tilt your handlebar back and slightly increase the overall height of the handlebar.Attention: Simply raising it does not work, as the windscreen is in the way.- made of CNC-machined aluminum - black, plastic-coated- hole spacing 38.9 - 30 mm rise- includes screws
Often, it's the little things that make the difference! This is also true for the Touratech handlebar riser for the KTM 1050, 1090, 1190, and 1290.The 25 mm rise of the handlebars results in a more upright and significantly more relaxed seating position. The adjustment range of the handlebar angle is increased, which further enhances comfort.Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages, especially for taller riders.Overall, this leads to a noticeable increase in endurance and concentration. Long highway stretches lose their intimidation, and even fast and challenging sections off-road become easier to handle.The simple installation can be completed in just a few minutes. No longer cables or brake lines are necessary!Material: black anodized aluminum
Simple direct mounting of GPS holders with "horizontal" (38 x 30 mm) hole spacing on 12 mm brackets.Fits Zumo XT, Zumo 5xx series, GPSmap 276Cx, etc.A RAM mount base plate 01-068-0023-0 can also be mounted with this.All parts made of stainless steel.