The Continent WB Jacket is an adventure-ready high-tech jacket from our DIRT Series that offers much more than meets the eye at first glance. It has been designed with serious adventure tours in mind and adapts to changing conditions. When the going gets tough The Continent WB has been designed and certified to be ready for action immediately. The SEESMART protection ensures that your elbows and shoulders are protected from injuries, and there is a pocket for a SEESOFT back protector. However, it is also possible to remove the standard protectors and wear the Continent WB jacket over our Proteus protector jacket with CE Level 1 and 2 certified impact absorbers when the going gets tough. Functional beyond looks and feel The elastic softshell construction not only looks functional but feels that way too – especially when the sleeves have been removed for even more freedom of movement and ventilation. Since the Continent WB is a transitional jacket, the sleeves can be removed at the shoulders, allowing it to quickly transform from a jacket for moderate temperatures into a fully-fledged, warming off-road vest.FeaturesInsulationWindBarrier®The REV’IT! WindBarrier® membrane is laminated between two different fabric layers: an elastic outer layer and a soft fleece inner layer. This combination blocks wind and helps repel water. Stopping wind and rain means preventing hypothermia and increasing the comfort and warmth level of the rider.ProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 both at normal and high (T+) ambient temperatures.Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.VentilationPerforation on the upper frontVisibilityLaminated reflective material on the upper armsReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Reflective logo on the backReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.Laminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.PocketsTwo front pocketsInner pocketBack pocketA slit pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.Adjustment optionsAdjustable tab at the cuffsDrawstring for waist adjustmentFitActive fitActive Fit means full freedom of movement while minimizing material that could restrict mobility. It is intelligently tailored and adapts to the body where needed. At the same time, it allows unrestricted mobility during activity-oriented movements.Outer fabricSoftshell 3LCORDURA® 750D RipstopCORDURA® with ripstop properties.FeaturesElastic key cord in the pocketAn integrated elastic cord in the pocket secures your keys and makes them quickly accessible.Removable sleevesRemovable sleeves for more freedom of movement and additional cooling for the arms.SustainabilityOuter shell made with recycled polyester

Wir präsentieren den Andon Hoodie. Ein lässiges, sportlich-ästhetisches Kleidungsstück, das sich nahtlos in den Alltag auf und neben dem Motorrad einfügt. Umziehen war gestern. Der Name des Spiels Komfort ist das A und O beim Andon Hoodie. Erreicht wird dies durch sein Außenmaterial aus Polyester-Stretch und das Mesh-Futter. Dank uneingeschränkter Bewegungsfreiheit fühlst du dich frei genießt den Moment. Die mitgelieferten SEESMART-Ellbogen- und Schulterprotektoren sowie die CE-Klassifizierung AA geben dir ein Gefühl der Sicherheit. Lässig bleiben Andon zählt zu den lässigen Modellen unserer Kollektion, weil wir uns von der Sportswear-Szene inspirieren lassen. Die große Känguru-Tasche auf der Vorderseite ist an beiden Seiten mit Reißverschlüssen versehen, damit deine persönlichen Gegenstände bei dir bleiben und nicht herausfallen, wenn du fährst. Und wenn du unterwegs bist und nicht möchtest, dass die Kapuze herumflattert, fixierst du sie einfach mit dem Knopf.FeaturesSchutzVorbereitet für SEESOFT CE-Level 2 RückenprotektorDie Rückentasche in diesem REV’IT! Stück ist maßgeschneidert für den SEESOFT CE-Level 2 Rückenprotektor Typ RV – eine einfache Aufrüstung für noch mehr Sicherheit.SEESMART CE-Level 1 EllbogenprotektorenSEESMART CE-Level 1 SchulterprotektorenSEESMART Schulterprotektoren bieten ein Höchstmaß an Flexibilität. Gleichzeitig erfüllen sie Aufschlagtests nach EN 1621-1:2012 CE-Level 1 sowohl bei normalen wie bei hohen (T+) Umgebungstemperaturen.DaumenschlaufenReady for Avertum Tech-Air® airbag system - ONE SIZE UPUnter diesem Kleidungsstück kannst du unseren REV'IT! Avertum Tech-Air® Airbag oder einen Tech5 Airbag tragen, wenn du es eine Nummer größer als deine normale Größe kaufst. Wenn du ein Kleidungsstück tragen möchten, das als ""Ready for Avertum Tech-Air® airbag system"" gekennzeichnet ist, musst du sicher sein, dass das Kleidungsstück die Ausdehnung des Airbags aufnehmen kann. Wir empfehlen daher, die folgende Anleitung zur Passform zu beachten: 1. Miss den Brustumfang und teile den Wert durch zwei 2. Miss das Kleidungsstück flach auf der Brustlinie 3. Wenn die Differenz zwischen Punkt 1 und Punkt 2 zwölf Zentimeter oder mehr beträgt, ist das Kleidungsstück zum Anziehen über dem Airbag geeignet. Hinweis: Bitte achte darauf, dass du das Kleidungsstück in der richtigen Größe kaufst, damit Schulter- und Ellbogenprotektoren richtig anliegen und dich im Falle eines Unfalls optimal schützen. Um Platz für die Ausdehnung des Airbags zu schaffen, kannst du alle separaten Schichten (Thermofutter, wasserdichtes Futter) entfernen, die die Ausdehnung des Airbags im Sturzfall einschränken können. Entferne den separaten Rückenprotektor in deiner Jacke, falls vorhanden, wenn du den Airbag trägst (ein Rückenprotektor ist im Airbag enthalten) und stelle alle Einstellriemen am Körper auf die weiteste Position ein.SichtbarkeitLaminiertes, reflektierendes Logo auf der BrustLaminiertes, reflektierendes Material an der KapuzeReflektionspanels sichern exzellente Sichtbarkeit, damit der Träger aus jeder Richtung gesehen wird. Für einen edleren Look sind die Reflektionspanels mit dem Stoff verschweißt. Das spart außerdem Nähte, was der Sicherheit zugute kommt.PassformRegular fitRegular Fit steht für einen hohen Tragekomfort und passt sich verschiedenen Körperformen und -größen an, gilt jedoch nicht als locker. Er betont nicht die Figur des Benutzers, sondern fällt um den Körper herum.MerkmaleKurzer VerbindungsreißverschlussDer kurze Verbindungsreißverschluss ist die kürzere, einfachere und schnellere Wahl unserer beiden Verbindungsreißverschlussoptionen. Er ermöglicht es, die Motorradjacke und die Motorradhose als eine Einheit zu verbinden. Für Komfort und Sicherheit.JeansschlaufeMit der Schlaufe auf der Rückseite kann die Jacke mit Ihrer Jeans verbunden werden und deshalb nicht hochrutschen, die Fahrt mit bloßem Rücken gehört der Vergangenheit an. Feste KapuzeKapuzenfixierung per KnopfDank der Fixierung der Kapuze durch einen Knopf flattert sie während der Fahrt nicht hin und her und verhindert, dass der Fahrtwind sich in ihr verfängt.Verstellkordelzug an der KapuzeDehnbarOberstoffPolyester-StretchFutterNetzTaschenKängurutasche vornDie Kängurutasche auf der Vorderseite bewahrt persönliche Gegenstände griffbereit auf. Zudem hält sie Hände warm und verleiht diesem Kleidungsstück einen coolen Streetstyle-Look.

Die Catalyst is lightweight, versatile, comfortable, and safe, fulfilling all the desires you have for a touring jacket. Additionally, it impresses with its style; its sporty appearance highlights its technical features and performance, making it suitable for any journey. The Catalyst H2O is the right answer for every adventure and every road. Asphalt Adventurer This completely new model is made from two high-quality polyester fabrics, which are among the most durable and abrasion-resistant textiles we have ever used for a touring jacket. Underneath, a lining with a two-layer hydratex membrane ensures dryness, while a thermal lining provides warmth. Together, they keep you in your personal wellness zone, whether you're winding through mountain roads or taking a trip around the corner. Now it's your turn Do you enjoy exploring distant places? Do you want to feel safe as you embark on your journey? Then it's time for REV'IT! quality protectors: SEESMART CE-Level 1 protectors at the shoulders and elbows, plus the option to integrate a SEESOFT CE-Level 2 back protector. And if you just want to enjoy the scenery in the sunshine, the ventilation zippers on the chest help keep you from getting too warm. This way, you can take it all in.FeaturesInsulationRemovable thermal liningWind blocker behind the front zipperThere is a wind-blocking flap behind the front zipper.ProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV'IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.VisibilityLaminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Laminated reflective logo on the chestLaminated reflective logo on the forearmAdjustabilityAdjustable tab on the upper armAdjustable tab on the collarAdjustable tab on the cuffsPocketsTwo front pocketsInner pocketInner pocket in the thermal liningThe inner pocket in the thermal lining provides additional storage space, keeping personal items close at hand.FitRegular fitRegular fit offers high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.VentilationAir outlet at the upper backZippers on the chestFeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as a unit for comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Soft collar edgeThe inside of the collar is made with a soft fabric for more comfort.V-shaped flap at the cuffWaterproofnessRemovable hydratex|Lite liningOuter fabricSoftshell 3LLiningMesh

Here comes the Crux sweatshirt. A casual piece of clothing with a sportswear aesthetic that seamlessly fits into everyday life on and off the bike. No need to change outfits. The name of the game Comfort is key with the Crux pullover. This is achieved through its polyester stretch outer material and mesh lining. Freedom of movement is hardly restricted, allowing you to feel free and enjoy the moment. The included SEESMART elbow and shoulder protectors, along with the CE rating of AA, provide a sense of security. Stay casual The Crux is a casual model from our collection featuring a knitted collar and cuffs, thumb loops, and a short connection zipper. Pair it with jeans from our collection and a belt from Safeway, and you'll always be in style on the go. It is also prepared for the SEESOFT back protector.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.Thumb loopsReady for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove any separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.VisibilityLaminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Laminated reflective logo on the chestPocketsSlip pocket on the sleeveFitRegular fitRegular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and faster choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Full stretchFull stretch in this garment provides maximum freedom of movement and wearing comfort.Knitted collarThe knitted collar adds extra comfort when the garment is worn directly on the skin.Knitted cuffsThe knitted cuffs block the wind, providing warmth and comfort.Outer fabricPolyester stretchLiningMesh

The creation of a stylish, durable jacket requires experience, craftsmanship, and countless hours of research and development. First things first: to design a garment that looks good and lasts long, one must choose the right fabric. In the Dale, the sophisticated weave of CORDURA® Stretch-Twill allows for a "mechanical" bending of the fabric, keeping it soft and supple. Additionally, its smooth surface provides excellent abrasion resistance. The protection Cross-hatched seams conceal the CE-certified SEESMART protection at the shoulders and elbows while emphasizing the slim fit of the jacket. Similarly discreet, an optional SEESOFT CE-Level 2 back protector can be slid into the corresponding pocket. In any case, the integrated protection of the Dale is unobtrusive yet highly effective, as it absorbs impacts and optimizes air circulation. Dale Double Pack Whether on the motorcycle or just out and about, Dale is always ready for action. The reflective print on the back may make you look twice and hint that behind the styling, seams, and slim fit lies a robust, technical, and motorcycle-specific jacket. A jacket that is just waiting for you to ride off with it. Features Protection Prepared for SEESOFT™ CE-Level 2 back protector The back pocket in this REV’IT! piece is tailored for the SEESOFT™ CE-Level 2 back protector type RV – an easy upgrade for even more safety. SEESMART CE-Level 1 shoulder protectors SEESMART CE-Level 1 elbow protectors Adjustability Adjustable strap at the waist Pockets Two front slip pockets Inner pocket Features Short connection zipper Jeans loop With the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past. Zip at the cuff The zipper at the cuff serves multiple purposes. First, it allows for easy entry into the sleeve, second, it provides additional ventilation on warm days, and third, it enables you to wear the glove cuff between the jacket and the membrane. V-shaped cover flap at the cuff Lining Polyester ripstop lining Smooth taffeta fabric that is particularly durable and abrasion-resistant thanks to its special ripstop weave with reinforcement threads woven in at regular intervals. Visibility Reflective logo on the back Retro-reflective, fluorescent label on the back for better visibility and increased safety in low light conditions. Outer fabric 14 oz CORDURA® Stretch-Twill Durable 14 oz. twill fabric made from CORDURA®.

We have given the proven design of the Denver jacket a modern twist with the inspiration to make it as iconic as the original. The four-pocket look may be ubiquitous, but we have made it unique: aesthetic details, a variety of safety features, and a powerful technical setup that sets REV'IT! clothing apart from the crowd. Redesigned storage With so many options for pockets, it would have been all too easy to stray from the classic look. Instead, we played with positioning and convenience. For example, we equipped the right upper pocket with a 20-degree gusset, allowing you to access it even more easily while riding. On the left side, a zippered Napoleon pocket offers elegant, secure storage, and all pocket openings and zippers of the Denver are waterproof. Refined protection PWR|Shell and CORDURA® Ripstop textiles enhance abrasion resistance at the shoulders and arms. This all-season jacket has your back with all the advanced REV'IT! protection you want: CE-certified SEESMART shoulder and elbow protectors and a pocket for an optional SEESOFT back protector.FeaturesInsulationRemovable thermal linerWaterproofinghydratex I 3LA 3-layer construction; the hydratex|3L membrane has a protective layer of tricot fabric laminated to the back of the membrane. This results in a waterproof and breathable membrane that is also very durable.ProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal liner, waterproof liner) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.VisibilityReflective logo on the backReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.Adjustment optionsAdjustable drawstring at the waistAdjustable tab at the collarAdjustable tab at the cuffsPocketsWaterproof Napoleon inner pocketTwo inner pocketsChest slip pocketExternal pocket on the thermal linerWaterproof storage pocket on the chestTwo waterproof storage pockets at the waistTwo hand warmer pocketsFitLoose fitWith Loose Fit, both comfort and aesthetics are prioritized. Unlike Regular Fit, Loose Fit is looser and more generously cut, providing maximum comfort and plenty of freedom of movement. The casual look of this style adds significantly to its appeal.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as a unit. For comfort and safety.Two-way front zipperV-shaped cover flap at the cuffsSeparately wearable thermal linerThe thermal liner can also be worn as a standalone jacket without a motorcycle.Adjustable FidLock® collar closureAdjustable collar closure with FidLock® – a patented design that uses magnets for easy and effective opening and closing.Front closure with zipper and buttonsFront closure that uses both a zipper and buttons for aesthetic reasons. Effectively seals the jacket and keeps the wind out.Outer fabric3L CORDURA® 750D RipstopA three-layer CORDURA® with ripstop properties.PWR|Shell Ripstop StretchDue to its special ripstop weaving method, durability and abrasion resistance are among the special characteristics of PWR|Shell. Thick threads woven in a cross pattern at regular intervals prevent the fabric from tearing further.

Sleek and ready for thrills: The Echelon GTX is an adventure touring jacket equipped with GORE-TEX laminate that doesn't beat around the bush. Its determined stance is thanks to the clean lines and understated features that make it high-quality and suitable for year-round adventures. A jacket you can rely on The Echelon GTX is a jacket you can count on. Its robust yet unobtrusive exterior conceals the fact that it comes with a very good level of equipment. It starts with the laminated GORE-TEX construction, which takes care of the top-notch, breathable waterproofing. The SEEFLEX CE Level 2 protection at the elbows and shoulders and the SEESOFT back protector are standard equipment. Additionally, there are plenty of practical pockets inside and out, demand-based ventilation throughout the jacket, as well as visibility-enhancing reflections in abundance, plus clever comfort features like the neoprene collar. Clever, understated design The clever, understated design of the Echelon GTX is underscored by integrated adjustment options at the sleeve cuffs, collar, hem, and lower waist, as well as an elastic waistband. This gives you two certainties: The jacket will always fit perfectly, and you will receive all the high-end features you rightfully expect.FeaturesVentilationZippers on the upper armsCenter front zipperZippers on the backWaterproofing2L GORE-TEX fabricBy laminating the GORE-TEX membrane to the fabric, a 100% waterproof and windproof, as well as highly breathable outer shell is created, perfect for unparalleled wearing comfort.ProtectionPrepared for two-part SEESOFT CE Level 1 chest protectorThe pocket in this REV’IT! piece is tailored for the two-part SEESOFT CE Level 1 chest protector – an easy upgrade for even more safety.SEEFLEX CE Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE Level 2, which also measures impact forces at different temperatures. The protector offers excellent wearing comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEEFLEX CE Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE Level 2, which also measures impact forces at different temperatures. The protector offers excellent wearing comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEESOFT AIR CE Level 2 back protectorThe SEESOFT Air is our CE Level 2 back protector insert with extra ventilation. It is capable of absorbing multiple impacts without compromising comfort, airflow, or freedom of movement.Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To make room for the airbag's expansion, you can remove all separate layers (thermal lining, waterproof lining) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.VisibilityLaminated reflective material on the chestReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Reflective logo on the backReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.Laminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Adjustment optionsAdjustable elbow protectorsThe elbow protector pockets allow for the adjustment of the elbow protectors in three different levels for maximum safety and comfort.Adjustable straps on the forearmElastic waistAdjustment tab at the cuffsDrawstring for waist adjustmentDrawstring at the collar for adjustmentIntegrated elastic drawstring in the collar for easy fit adjustment, increasing comfort and preventing drafts.PocketsTwo front pocketsChest pocketBack pocketA slit pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.Arm pocketFitRegular fitRegular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesLong connection zipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Short connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Comfort collarThe comfort collar means added coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.Hanging loop outsideWhether wearing the jacket or hanging it up to dry after a wet ride, the robust outer hanging loop is a practical addition to the design.TIZIP® MasterSeal zipperThe multifunctional TIZIP® MasterSeal is a waterproof, weather-resistant, and durable zipper that provides maximum protection from the elements with its robust yet flexible design. Its waterproof and pressure-resistant properties are secured by compressing the sealing lip over the interlocking elements. The TIZIP® MasterSeal is opened and closed with a precision slider made of metal or polymer metal. The zipper is also oil and gasoline resistant. Cleaning and storage: - We recommend cleaning TIZIP® zippers with a fine brush and mild soap and water. - Dirt that settles between the teeth or bends of the zippers can negatively affect the sealing lip and thus limit the sealing performance. - The zippers should be stored completely dry (inside and outside), closed, clean, and without creases or folds. - If the zipper is not completely dry, it should be stored fully open on a hanger. - Since moisture and high temperatures can lead to microbial accumulation, the zipper should never be stored in a closed box.Expansion pleats at the back armholeIntegrated pleats and comfort-enhancing stretch at the back armhole for better fit.Outer fabricNeopreneNeoprene is a synthetic rubber and useful for protective clothing: it is abrasion-resistant, insensitive to chemicals, waterproof, somewhat stretchable, and elastic.2L GORE-TEX Nylon 400D fabricThis fabric is made from robust, high-strength 400 Denier nylon, which provides high abrasion and tear resistance. The laminated GORE-TEX membrane on the nylon fabric creates a 100 percent waterproof, windproof, and highly breathable outer shell with great wearing comfort.2L Nylon 200D GORE-TEX fabricWaterproof two-layer 200D nylon fabric from GORE-TEX.LiningMeshSoft mesh spacer fabricMesh interlining that ensures comfort and fit.

In the city, summers seem to last longer. Hotter days and warmer nights call for an essential companion in the form of a lightweight jacket that cools you down. But the Eclipse 2 Ladies jacket not only optimizes the airflow. Beneath the strategically placed polyester mesh inserts are CE-certified SEESMART protectors you can rely on. Additionally, there are many practical details for your daily rides through the city, such as zippered pockets, a wind flap behind the front zipper, and a jeans loop – everything that is important in summer. Cool for Commuters When you weave through rush hour traffic to work, you will appreciate the breathable mesh inserts at the front, back, and inner arms. They allow cooling airflow to reach your upper body. The abrasion-resistant 600-denier polyester construction ensures secure comfort, and you can optimize the fit with tabs at the waist, sleeves, and biceps. More Safety The Eclipse 2 Ladies has evolved. Now, there are SEESMART CE-Level 1 protectors at the elbows and shoulders. With the SEESOFT CE-Level 2 back protector, you can further enhance your safety, as it offers discreet yet highly effective impact protection. So, as you zip through the city, this added safety will not weigh you down but will uplift you.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.SEESMART CE-Level 1 elbow protectorsSEESMART elbow protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.VisibilityLaminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.AdjustabilityAdjustable tab on the upper armAdjustable tab at the waistAdjustable tab at the cuffsPocketsTwo front pocketsInner pocketVentilationFully ventilated meshFitSlim FitSlim Fit accentuates the natural body shape and provides a sleek and elegant appearance. It features a tighter and narrower cut that highlights certain body areas. Despite the slimmer profile, Slim Fit still offers plenty of comfort and freedom of movement where needed.FeaturesJeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.V-shaped cover flap at the cuffOuter Fabric600D PolyesterThis fabric made from polyester yarn is a perfect, adaptable material for areas with low impact risk. For high wearing comfort.Polyester meshLiningMesh

In the city, summers seem to last longer. Hot days and warm nights call for an essential companion in the form of a lightweight jacket that cools you down. But the Eclipse 2 jacket not only optimizes the airflow. Beneath the strategically placed polyester mesh inserts are CE-certified SEESMART protectors that you can rely on. Additionally, there are many practical details for your daily rides through the city, such as zippered pockets, a wind flap behind the front zipper, and a jeans loop – everything that is important in summer. Cool for Commuters When you weave through rush hour traffic on your way to work, you will appreciate the breathable mesh inserts on the front, back, and inner arms. They stylishly cool the airflow to your upper body. The abrasion-resistant 600-denier polyester construction ensures safe comfort, and you can optimize the fit with tabs at the waist, sleeves, and biceps. More Safety The Eclipse 2 has evolved. Now, there are SEESMART CE-Level 1 protectors at the elbows and shoulders. With the SEESOFT CE-Level 2 back protector, you can further enhance your safety, as it offers discreet yet highly effective impact protection. So, as you zip through the city, this added safety will not weigh you down but will uplift you.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.VisibilityLaminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Adjustment OptionsAdjustable tab on the upper armAdjustable tab at the waistAdjustable tab at the cuffsPocketsTwo front slip pocketsInner pocketVentilationFully ventilated meshFitSlim FitSlim Fit accentuates the natural body shape and provides a sleek and elegant appearance. It features a tighter and narrower cut that highlights certain body areas. Despite the slimmer profile, Slim Fit still offers plenty of comfort and freedom of movement where needed.FeaturesJeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.V-shaped cover strip at the cuffOuter Fabric600D PolyesterThis polyester yarn fabric is a perfect, adaptable material for areas with low impact risk. For high wearing comfort.Polyester meshLiningMesh

The Elin Ladies is a lightweight sport jacket that combines technical performance and abrasion resistance. The CORDURA® stretch twill gives it a natural feel and a surface that feels almost as soft as skin. This newly developed 14oz. fabric features a flexibility that, along with the stretch inserts, makes you feel like it moves and breathes with you. The result: remarkable comfort and reassuring robustness. Smooth at speed A subtle design does not mean that protection is neglected. That’s why the Elin Ladies has CE-certified SEESMART inserts at the shoulders and elbows, seamlessly integrating into its sleek contour. They move with you, whether you’re carefully navigating through traffic or speeding through curves. Seasonally variable The Elin Ladies is not just suitable for summer. With the removable thermal lining, you can ride well into autumn and be back on the road early in spring. For additional weather protection, there’s a wind flap behind the front zipper and a foldable collar. Discreet reflective details on the back take care of your visibility when night falls. Features Insulation Removable thermal lining   Wind flap behind the front zipper There is a wind-blocking cover strip behind the front zipper. Protection Prepared for SEESOFT™ CE-Level 2 back protector The back pocket in this REV’IT! piece is tailored for the SEESOFT™ CE-Level 2 back protector type RV – an easy upgrade for even more safety. SEESMART CE-Level 1 shoulder protectors   SEESMART CE-Level 1 elbow protectors   Pockets Napoleon inner pocket   Inner pocket   Two front pockets   Features Short connection zipper   Jeans loop With the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, so riding with a bare back is a thing of the past. Zip at the cuff The zipper at the cuff serves multiple purposes. First, it allows for easy entry into the sleeve, second, it provides additional ventilation on warm days, and third, it allows you to wear the glove cuff between the jacket and the membrane. Stretch at the elbows   Soft collar edge The inside of the collar is made of a soft fabric for added comfort. Stretch inserts at the sides   Stretch in the sleeves   V-shaped cover strip at the cuff   Outer fabric Polyester stretch   14 oz CORDURA® stretch twill Durable 14 oz. twill fabric made from CORDURA®. Visibility Reflective fabric on the back This product features reflective fabric on the back to help motorcyclists be seen better in low light, bad weather, and/or at night. Lining Polyester ripstop lining Smooth taffeta fabric that is particularly durable and abrasion-resistant due to its special ripstop weave with reinforcement threads woven in at regular intervals.

The oversized pocket of the Esmont overshirt is a design influenced by the USMC standard shirts of the 1950s, drawing attention and blurring the lines between jacket and overshirt. But it is the groundbreaking CORDURA® Stretch Twill that steals the show. This newly developed, grippy textile is a 14.2oz fabric that combines tradition and technical performance with a natural, wool-like feel. Safe inside and out However, the protection of this overshirt has nothing wool-like about it. On the outside, there is a CORDURA® material known for its abrasion resistance. Inside, there is a pocket for the optional SEESOFT back protector, and SEESMART Level 1 protectors are standard at the shoulders and elbows. Under the surface While you are still busy admiring the craftsmanship of the Esmont overshirt and its unconventional styling, you might easily overlook the clever and skillfully hidden motorcycle-ready features. This includes the zipper that allows you to attach this stylish overshirt to your motorcycle pants via the Safeway connection belt in seconds. Or the secure inner pocket: perfectly positioned for easy access.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART elbow protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 both at normal and high (T+) ambient temperatures.SEESMART CE-Level 1 shoulder protectorsPocketsStorage pocket on the chestInner pocketFitRegular fitRegular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and faster choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as one unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.V-shaped cover strip at the cuffFront closure with zipper and buttonsFront closure that uses both a zipper and buttons for aesthetic reasons. Effectively seals the jacket and keeps the wind out.Concealed snap button at the collarInvisible snap button closure at the collar for aesthetic reasons.LiningPolyester ripstop liningSmooth taffeta fabric that is particularly durable and abrasion-resistant due to its special ripstop weave with reinforcement threads woven in at regular intervals.VisibilityReflective logo on the backRetro-reflective, fluorescent label on the back for better visibility and increased safety in low light conditions.Outer fabric14 oz CORDURA® Stretch TwillDurable 14 oz. twill fabric made from CORDURA®.

Die Horizon 3 H2O Ladies motorcycle jacket offers you the functionality of a waterproof high-end touring jacket at an affordable price. We have laminated our renowned hydratex|Lite membrane to the outer shell to create a 100 percent waterproof jacket with little to no water absorption. For rides in cooler temperatures, we have equipped it with a removable and separately wearable thermal lining. When the thermal lining is removed, you can easily open the front ventilation panels while riding. The two mesh inserts on the chest and the two ventilation openings on the back transform your waterproof touring jacket into a highly ventilated piece, keeping you comfortable even in higher temperatures. The Horizon 3 H2O Ladies is equipped with our award-winning SEEFLEX CE-Level 2 protectors at the shoulders and elbows (adjustable) and is prepared for a safety upgrade with the SEESOFT CE-Level 2 back protector and CE-Level 1 chest protectors. Various adjustment tabs and straps ensure the perfect fit to your body. The Horizon 3 H2O features a variety of pockets, including two waterproof ones on the front and a large one on the back, so you always have your essential items within reach. To remain visible, the back features a reflective logo and the arms have reflective stripes. Affordable. Technical. Driven by the desire to perform at its best in any weather. That’s the Horizon 3 H2O Ladies motorcycle jacket.FeaturesInsulationRemovable thermal liningProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEEFLEX CE-Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent wearing comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEEFLEX CE-Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent wearing comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.Waterproofnesshydratex|LiteVentilationZip at the upper backAquadefence panels at the upper frontWhen VCS|Aquadefence is open, airflow streams directly onto the body. When the zipper or panel is closed, they press against a water drainage channel. This garment is now completely waterproof because the drainage channel prevents moisture from entering through the ventilation opening. (EU patent EP 2574249, US patent US 13/630.520)VisibilityLaminated reflective material on the upper armsReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Laminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Adjustment optionsAdjustable elbow protectorsThe elbow protector pockets allow for the adjustment of the elbow protectors in three different levels for maximum safety and comfort.Adjustable straps on the forearmAdjustable straps at the waistAdjustable tab on the upper armFlexisnap at the collarDrawstring for adjustment at the waistPocketsExternal pocket on the thermal liningTwo waterproof inner pocketsTwo storage pockets at the frontSlip pocket on the backA slot pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.Lining3D meshMeshFeaturesLong connection zipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Short connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Soft collar edgeThe inside of the collar is lined with a soft fabric for more comfort.Two-way snap closure systemThe two-way snap closure system closes the collar in bad weather and can be flipped and reversed to keep the collar open and let fresh air in.Connector for safety vest Connector NEONThe connector allows a jacket to be equipped with a REV’IT! safety vest in no time. The highly visible vest enhances active safety.Outer fabricMatte polyester 450D 2LTwo-layer 450D polyester fabric with a matte finish.Ripstop polyester 2LTwo-layer polyester fabric with integrated ripstop fabric that increases abrasion resistance.

Die Horizon 3 H2O bietet dir die Funktionalität einer wasserdichten High-End-Touringjacke zu einem erschwinglichen Preis. Wir haben unsere renommierte hydratex|Lite Membran auf die Außenhülle laminiert, um eine 100 Prozent wasserdichte Jacke mit geringer bis gar keiner Wasseraufnahme zu schaffen. Für Fahrten bei kühlen Temperaturen haben wir sie mit einem herausnehmbaren und separat tragbaren Thermofutter ausgestattet. Wenn das Thermofutter entfernt ist, kannst du die vorderen Belüftungspanels einfach während der Fahrt öffnen. Die beiden Mesh-Einsätze auf der Brust und die beiden Belüftungsöffnungen am Rücken verwandeln deine wasserdichte Tourenjacke in ein stark belüftetes Exemplar, in dem du dich auch bei höheren Temperaturen wohl fühlst. Die Horizon 3 H2O ist mit unseren preisgekrönten SEEFLEX CE-Level 2-Protektoren an Schultern und Ellbogen (verstellbar) ausgestattet und für ein Sicherheits-Upgrade durch den SEESOFT CE-Level 2 Rückenprotektor und die CE-Level 1 Brustprotektoren vorbereitet. Verschiedene Verstelllaschen und Gurte besorgen die perfekte Anpassung an deinen Körper. Die Horizon 3 H2O verfügt über eine Vielzahl von Taschen, darunter zwei wasserdichte auf der Vorderseite und eine große auf der Rückseite, damit du deine wichtigsten Utensilien immer griffbereit hast. Um sichtbar zu bleiben, tragen die Rückseite ein reflektierendes Logo und die Arme reflektierende Streifen. Erschwinglich. Technisch. Angetrieben von dem Wunsch, bei jedem Wetter das Beste zu leisten. Das ist die Horizon 3 H2O Motorradjacke.FeaturesInsulationRemovable thermal linerProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector Type RV – an easy upgrade for even more safety.Prepared for two-part SEESOFT CE-Level 1 chest protectorThe pocket in this REV’IT! piece is tailored for the two-part chest protector SEESOFT CE-Level 1 – an easy upgrade for even more safety.SEEFLEX CE-Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEEFLEX CE-Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag if you purchase it one size larger than your normal size. If you want to wear a garment labeled as "Ready for Avertum Tech-Air® airbag system," you must ensure that the garment can accommodate the expansion of the airbag. Therefore, we recommend following the fitting guide below: 1. Measure your chest circumference and divide the value by two. 2. Measure the garment flat at the chest line. 3. If the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag. Note: Please ensure that you purchase the garment in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To allow for the expansion of the airbag, you can remove all separate layers (thermal liner, waterproof liner) that may restrict the airbag's expansion in the event of a fall. Remove the separate back protector in your jacket, if present, when wearing the airbag (a back protector is included in the airbag) and set all adjustment straps on the body to the widest position.Waterproofnesshydratex|LiteVentilationZipper at the upper backAquadefence panels at the upper frontWhen VCS|Aquadefence is open, airflow directly reaches the body. When the zipper or panel is closed, they press against a water drainage channel. This garment is now completely waterproof because the drainage channel prevents moisture from entering through the ventilation opening. (EU patent EP 2574249, US patent US 13/630.520)VisibilityLaminated reflective material on the upper armsReflective panels ensure excellent visibility so that the wearer can be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.Laminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Adjustment optionsAdjustable elbow protectorsThe elbow protector pockets allow for the adjustment of the elbow protectors in three different levels for maximum safety and comfort.Adjustable straps at the forearmAdjustable straps at the waistAdjustable tab at the upper armFlexisnap at the collarDrawstring for adjustment at the waistPocketsExternal pocket on the thermal linerTwo waterproof inner pocketsTwo storage pockets at the frontSlip pocket on the backA slot pocket in the lower back area allows for easily accessible storage of personal items without disturbing the rider.Lining3D meshMeshFeaturesLong connection zipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Short connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Soft collar edgeThe inside of the collar is made of a soft fabric for added comfort.Two-way snap closure systemThe two-way snap closure system closes the collar in bad weather and can be flipped and reversed to keep the collar open and let fresh air in.Connector for NEON safety vestThe connector allows a jacket to be equipped with a REV’IT! safety vest in no time. The highly visible vest enhances active safety.Outer fabricMatte 450D polyester 2LTwo-layer 450D polyester fabric with a matte finish.Ripstop polyester 2LTwo-layer polyester fabric with integrated ripstop fabric that increases abrasion resistance.

The Hyperspeed 2 Air is a sporty jacket in street style with a clear commitment: a next-generation jacket with the same design features as its predecessors. The big difference is – as the name suggests – a form-fitting, race-specific cut that allows for maximum air circulation. Ventilation thanks to perforation This jacket is all about airflow. Every perforation and panel plays a role: the cooling effect of perforated Monaco leather on the back, sleeves, and chest, plus 3D Air Mesh and stretch textiles that allow air to flow faster while riding. And when the wind picks up, you can zip in the windproof vest. Air still circulates, but you are better insulated. In the Hyperspeed 2 Air, you feel completely comfortable and, above all, ready for any ride. Hyperspeed performance Performance is in the DNA of this jacket; it literally carries the genes. The visible impact zones on the shoulders, forearms, chest, and neck are made from strong Monaco cowhide, while the SEEFLEX CE-Level 2 protectors and the SEESOFT back protector are integrated just like in a racing suit. Who says sporty can't be practical? The Hyperspeed Air 2 has five well-hidden inner and outer pockets for the important things you don’t want to lose.FeaturesInsulationRemovable thermal body warmerWind blocker behind the front zipperThere is a wind-blocking flap behind the front zipper.Wind blocker behind cuff zipperProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.Prepared for two-part SEESOFT CE-Level 1 chest protectorThe pocket in this REV’IT! piece is tailored for the two-part chest protector SEESOFT CE-Level 1 – an easy upgrade for even more safety.SEEFLEX CE-Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEEFLEX CE-Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.Two-component protectors on the shoulderSafety seamsThe seams determine the durability of a motorcycle garment in a fall. That’s why REV’IT! uses only safety seams in areas at risk of falling. These have a visible and an invisible seam. This construction keeps the outer shell together, even if the visible seam is worn through.Adjustment optionsAdjustment straps at the waistPocketsSlip pocket at the waistThree inner pocketsNapoleon inner pocketFitTight fitTight Fit is designed to fit snugly and adapt to the rider's body shape. The contoured design ensures that the fabric moves with the body without restricting independence in any situation. This fit is primarily found in base layers and in our racing-oriented garments.FeaturesLong connection zipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Short connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Jeans loopThe loop on the back allows the jacket to be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Comfort collarThe comfort collar adds extra coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.Comfort cuffsZipper at the cuffThe zipper at the sleeve cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer layer and over your base layer.Stretch inserts on the shoulderStretch inserts on the elbowsSoft collar edgeThe inside of the collar is equipped with a soft fabric for more comfort.Stretch at the waistStretch in the sleevesStretch at the armholesStretch at the frontStretchable arm cuffVentilationPerforation on the forearmsVentilation panels on the upper armsThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Perforation on the upper backPerforation on the lower frontPerforation on the lower backPerforated inserts on the back of the sleevesOuter fabricNeopreneNeoprene is a synthetic rubber and useful for protective clothing: it is abrasion-resistant, insensitive to chemicals, waterproof, somewhat stretchy, and elastic.Monaco Performance cowhideThis product features premium Monaco Performance cowhide.3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.Artificial leatherA synthetic leather version with a similar appearance.Polyester stretchEmbossed leatherLiningMesh

Our designers are always up for challenges, and there aren't many challenges greater than the air we breathe. More specifically, how we channel it aerodynamically through every single piece of REV'IT! clothing. That's why we believe the Hyperspeed 2 GT Air is something special. It follows the original line and characteristic style of the series while setting a new record in lightweight construction and optimal air circulation. This versatile summer sport jacket is not only ventilated but also combines originality and practicality with a bold, racing-inspired design. Hot days, even hotter graphics Every fiber of the Hyperspeed 2 GT Air helps you defy the heat while looking good: abrasion-resistant (yet flexible) three-layer softshell fabric on the shoulders, arms, and sides, plus polyester mesh and PWR|Jacquard that ensure air circulation around the body. With the striking REV'IT! colors and the equally eye-catching graphic pattern woven into the smooth, grippy panels of this jacket, durability has never looked so good. Stable in design, light in grip For the latest model in the series, we aimed for an airy design and high goals. And while the Hyperspeed 2 GT Air is one of our lightest jackets ever, you can expect the same level of protection and upgrade options as with any other top-tier REV'IT! clothing. This means discreet SEESMART CE-Level 1 protectors at the shoulders and elbows, as well as a pocket for an additional SEESOFT CE-Level 2 back protector.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.VisibilityLaminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Laminated reflective logo on the chestAdjustment optionsAdjustable tab on the upper armAdjustable tab at the cuffsDrawstring for waist adjustmentPocketsTwo front pocketsInner pocketVentilationFully ventilated meshFitRegular fitRegular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and faster choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as one unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making riding with a bare back a thing of the past.Soft collar edgeThe inside of the collar is made with a soft fabric for more comfort.V-shaped cover flap at the cuffOuter fabricSoftshell 3LMeshPWR|JacquardJacquard-knitted material.

Die Hyperspeed 2 H2O hat den aufregenden Reiz von Rennsportbekleidung, wie du ihn von dieser stylischen und zugleich funktionellen Kollektion erwartest. Außerdem ist sie komplett wasserdicht, sodass Regen dich nicht aufhält, ausbremst oder deine Laune trübt. Diese äußerst vielseitige Jacke hält dich trocken, sicher und sieht gut aus, wenn du unterwegs bist. Die Merkmale Das charakteristische Design der Hyperspeed Serie ist kaum zu übersehen. Wir sprechen hier von einem echten Rennsport-Einfluss, mit einem markanten Hartschalen-Schulterschutz und lebendigen Grafiken. Abgesehen vom sportlichen Look der Jacke sorgen Softshell- und PWR|Jacquard-Einsätze für eine hervorragende Passform, während ein atmungsaktiver hydratex G-Liner dem Regen die Schau stiehlt. Den Namen Hyperspeed 2 trägt diese Jacke ebenso zurecht wie das H2O-Siegel. Geschützt und gekühlt Bei jeder Spitzenjacke ist die Klimaregulierung von entscheidender Bedeutung. Die Belüftungsöffnung auf dem Rücken der Hyperspeed 2 H2O leitet den Fahrtwind um den Körper herum, verstärkt durch die Belüftungsreißverschlüsse am Unterarm. Sie kühlt dich ab und schützt dich gleichzeitig mit SEESMART Protektion an Schulter und Ellbogen und einer Tasche, die einen SEESOFT Rückenprotektor der Stufe 2 aufnimmt. So bist du sicher, egal wie intensiv deine Fahrt wird.FeaturesVentilationZippers on the forearmsAir outlet on the upper backInsulationRemovable thermal linerWind and water catcher behind front zipperWaterproofnesshydratex|Mesh G-LinerThe 100% waterproof hydratex|G-Liner coating is located on the mesh lining of the garment. The seams are sealed, making it completely waterproof. This maximizes comfort while ensuring the functional properties of the G-Liner construction.ProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.TPU protectors on the shoulderVisibilityLaminated reflective logo on the backThis product features a reflective logo on the back of the garment, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Laminated reflective logo on the chestAdjustabilityAdjustable tab on the upper armAdjustable tab on the cuffsDrawstring for waist adjustmentPocketsTwo front pocketsInner pocket in the thermal linerThe inner pocket in the thermal liner provides additional storage space, keeping personal items close at hand.Waterproof inner pocketFitRegular fitRegular fit stands for high comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and faster choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as one unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Soft collar edgeThe inside of the collar is lined with a soft fabric for added comfort.V-shaped cover strip at the cuffOuter fabricSoftshell 3LPWR|JacquardJacquard knitted material.LiningMeshSustainabilityOuter shell made with recycled polyester

The original Hyperspeed Pro fulfilled the riders' desires for an alternative to a one-piece suit. The Hyperspeed 2 Pro is still the upper half of a racing suit. But this jacket with enhanced specifications does not do things by halves; it is a complete, life-affirming statement. Powerful lineage On one hand, the lineage from motorsport is obvious. Features include elbow sliders, an aerodynamic hump, MotoGP design elements, and generous, strategically placed perforations on the sides and shoulders for maximum airflow – a list that is usually reserved for racing. Developed beyond motorsport On the other hand, the jacket offers high utility and comfort for street use. There are reflective details for low light and a zipper to connect with leather pants or jeans. For longer rides, the aerodynamic hump has space for a hydration bladder and three pockets (one inner, one Napoleon, and one hip pocket). Stretch inserts at the elbows, armholes, shoulders, and chest make this high-performance jacket as comfortable as it is safe. As with any true racing jacket, there are a variety of protection options: SEESOFT for back and chest, SEEFLEX at shoulders and elbows, and Tech-Air® airbag preparation.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.Prepared for two-part SEESOFT CE-Level 1 chest protectorThe pocket in this REV’IT! piece is tailored for the two-part chest protector SEESOFT CE-Level 1 – an easy upgrade for even more safety.SEEFLEX CE-Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent wearing comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.SEEFLEX CE-Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent wearing comfort, unique ventilation properties, flexibility, and low weight – all in favor of passive rider safety.Two-component protectors on the shoulderSafety seamsThe seams determine the durability of a motorcycle garment in a fall. That’s why REV’IT! uses only safety seams in crash-prone areas. These have a visible and an invisible seam. This construction keeps the outer shell together even if the visible seam is worn through.TPU elbow slidersPrepared for Avertum Tech-Air® airbag system - TRUE TO SIZEUnder this garment, you can wear our REV'IT! Avertum Tech-Air® Airbag or a Tech5 Airbag that corresponds exactly to your size. You can purchase this garment in your usual size. The REV'IT! Avertum Tech-Air® Airbag vest is designed to be worn under any well-fitting clothing. It should be noted that the clothing must be large enough to allow the airbag to expand in the event of a fall. Riders who want to wear sport clothing (made of leather) can also combine the REV'IT! Avertum Tech-Air® Airbag with Tech-Air® compatible (leather) clothing that has integrated (leather) stretch elements to allow the airbag to inflate. These are marked on our website with "PREPARED FOR TECH-AIR® AIRBAG SYSTEM," and you can purchase these garments in your usual size.VisibilityReflective logo on the backReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.Adjustment optionsAdjustable straps at the waistAdjustable zipper from the waistPocketsSlip pocket at the waistTwo inner pocketsNapoleon inner pocketFitTight fitTight Fit is designed to fit snugly and conform to the rider's body shape. The contoured design ensures that the fabric moves with the body without restricting independence in any situation. This fit is especially found in base layers and in our racing-oriented garments.FeaturesLong connection zipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as one unit. For comfort and safety.Short connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as one unit. For comfort and safety.Aerodynamic humpJeans loopThe loop on the back allows the jacket to be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Comfort collarThe comfort collar adds extra coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.Comfort cuffsZipper at the cuffThe zipper at the sleeve cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer layer and over your base layer.Stretch at the backStretch inserts at the shoulderStretch inserts at the elbowsSoft collar edgeThe inside of the collar is equipped with a soft fabric for more wearing comfort.Stretch at the waistStretch in the sleevesStretch at the armholesStretch at the frontInsulationWind blocker behind the front zipperBehind the front zipper, there is a wind-blocking cover strip.Wind blocker behind cuff zipperVentilationPerforation on the underarmsPerforation on the upper backPerforation on the lower backVentilation panels on the aerodynamic humpThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Ventilation panels on the chestThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Outer fabricNeopreneNeoprene is a synthetic rubber and useful for protective clothing: it is abrasion-resistant, insensitive to chemicals, waterproof, slightly stretchable, and elastic.Perforated Monaco Performance cowhideThe premium Monaco Performance cowhide is perforated for ventilation.Monaco Performance cowhideThis product features premium Monaco Performance cowhide.3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.PWR|Shell StretchNULLArtificial leatherA synthetic leather version with a similar appearance.Embossed leatherPWR|JacquardJacquard-knitted material.LiningMeshPolyamide stretchIntegrated stretch made of durable polyamide in the lining provides comfort and fit.

Die Ignition 4 H20 is a fourth-generation motorcycle jacket that takes multi-seasonality to the next level. Urban-inspired, high-quality materials provide the typical sporty REV'IT! look and all-year-round comfort, while the premium panel construction combines high-quality cowhide leather and tightly woven PWR|Shell mesh – natural materials and textiles for maximum abrasion resistance and airflow. Versatile for changeable weather In unpredictable weather conditions, this jacket can be used flexibly thanks to its layered construction. You simply put on the removable lining of your choice (thermal lining or hydratex membrane or both), and you're ready for the elements. The sophisticated micropores of the waterproof lining are two nanometers in size (that's 0.000002 millimeters) and small enough to resist wind and rain. Sometimes, less is definitely more. Arrive fresh and relaxed When the sun is blazing, there is plenty of ventilation, including zippers on the underarms. The material mix offers both freedom of movement and CE-certified protection, allowing you to maintain control. Additionally, our award-winning SEEFLEX CE-Level 2 protectors at the shoulders and elbows make every ride more relaxed, calmer, and just a bit safer.FeaturesInsulationRemovable thermal liningWind blocker behind the front zipperThere is a wind-blocking flap behind the front zipper.Wind blocker behind cuff zipperProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.Prepared for two-part SEESOFT CE-Level 1 chest protectorThe pocket in this REV’IT! piece is tailored for the two-part chest protector SEESOFT CE-Level 1 – an easy upgrade for even more safety.SEEFLEX CE-Level 2 elbow protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all for the benefit of passive rider safety.SEEFLEX CE-Level 2 shoulder protectorsThe SEEFLEX protector is the latest innovation from the REV’IT! R&D department. It exceeds the new standard EN 1621-1:2012 CE-Level 2, which also measures impact forces at different temperatures. The protector offers excellent comfort, unique ventilation properties, flexibility, and low weight – all for the benefit of passive rider safety.Safety seamsThe seams determine the durability of a motorcycle garment in the event of a fall. That’s why REV’IT! uses only safety seams in areas at risk of impact. These have a visible and an invisible seam. This construction keeps the outer shell together, even if the visible seam is worn through.VentilationVentilation panels on the upper frontThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Ventilation panels on the upper armsThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Ventilation panels on the lower frontThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Ventilation panels on the lower backThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.Ventilation panels on the upper backThe ventilation panels on this garment allow for optimal airflow, cooling the body while riding.VisibilityReflective logo on the backReflective fabric on the backThis product features reflective fabric on the back, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Reflective fabric on the upper armThis product features reflective fabric on the upper arm, allowing motorcyclists to be seen better in low light, bad weather, and/or at night.Adjustment optionsAdjustable straps at the waistPocketsTwo front pocketsNapoleon inner pocketFour inner pocketsFitSlim FitSlim Fit accentuates the natural body shape and provides a sleek and elegant appearance. It features a tighter and narrower cut that highlights certain body areas. Despite the slimmer profile, Slim Fit still offers plenty of comfort and freedom of movement where needed.FeaturesLong connection zipperThe long connection zipper is the longer, safer choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Short connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Jeans loopThe loop on the back allows the jacket to be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Comfort collarThe comfort collar adds extra coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.Comfort cuffsStretch at the elbowsSoft collar edgeThe inside of the collar is equipped with a soft fabric for more wearing comfort.Stretch in the sleevesStretch at the armholesHanging loop on the outsideWhether wearing the jacket or hanging it up to dry after a wet ride, the sturdy outer hanging loop is a practical addition to the design.WaterproofnessRemovable hydratex|Lite liningOuter fabricNeopreneNeoprene is a synthetic rubber and useful for protective clothing: it is abrasion-resistant, insensitive to chemicals, waterproof, somewhat stretchable, and elastic.PWR|Shell meshThis PWR|Shell is knitted in an open structure to ensure breathability and flexibility, providing comfort and safety alike.Cowhide leatherCowhide leather is used in this garment for optimal fit and protection.Polyester stretchArtificial nubuckLiningMesh

The Eclipse gets straight to the point when you want to ride your motorcycle in high temperatures while feeling well protected. Areas at risk of abrasion are made from durable 600D polyester; the front, back, and the inner sleeves are made of mesh fabric to ensure total ventilation of your upper body. Standard safety is provided by CE-compliant protectors, which can be enhanced with the SEESOFT™ CE-Level 2 back protector. A variety of adjustment straps and tabs adapt the motorcycle jacket to your preferences for a good fit. With a double jeans loop, you can connect the Eclipse to your jeans, preventing it from shifting during the ride. Welcome the sunshine! Sizes S-XXLFeaturesOuter FabricMesh

With the Emulsion Jersey, you stand out on every ride. It is a splash of color that contrasts with the neutral color palette of the outer layers of our DIRT Series collection. How we see it The flowing graphic pattern reflects the environment in which it was created. Take a look at a topographic elevation map, and see how the curves and contours seamlessly blend into one another. Now look at the Emulsion. Do you see it? We thought so! Reach new heights you never thought possible. To wear over or under The Emulsion Jersey is made from lightweight polyester stretch mesh with an open structure and is designed for high comfort while riding. However, as a standalone product, it is not CE certified and should be worn either over the Nucleus protector jacket or under your CE-certified outer shells.FeaturesFitRegular fitRegular fit stands for high comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.CharacteristicsFull stretchFull stretch in this garment provides maximum freedom of movement and comfort.Outer fabricPolyester stretch fabricThis lightweight polyester fabric combines the benefits of breathable mesh with comfortable stretch.

The check pattern of this shirt is the epitome of casual comfort, but that's only half the truth. The CORDURA® stretch twill exterior provides a fitted look. Thus, the Larimer has style references and the proven safety of CE-certified impact protectors, ticking off most, if not all, items on your checklist for motorcycle-ready shirts. The details matter From the metallic REV'IT! logo on the arm to the reflective print on the upper back, the external details of the Larimer are subtle and straightforward. Abrasion-resistant safety seams hold the garment together at crash-prone areas, while the jeans loop and zipper allow you to securely attach this sleek, stylish shirt to your pants. Inner strength Inside, a technical lining stabilizes the SEESMART shoulder and elbow protectors, while polyester ripstop taffeta provides reinforcements in areas where durability is most needed. If you opt for a SEESOFT back protector, there is a tailored pocket for it, further enhancing the robust exterior and built-in inner strength.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART elbow protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.SEESMART CE-Level 1 shoulder protectorsPocketsInner pocketFitRegular fitRegular fit stands for high wearing comfort and adapts to various body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.V-shaped cover strip at the cuffFront closure with zipper and buttonsFront closure that uses both a zipper and buttons for aesthetic reasons. It effectively seals the jacket and keeps the wind out.Concealed snap button at the collarInvisible snap button closure at the collar for aesthetic reasons.LiningPolyester ripstop liningSmooth taffeta fabric that is particularly durable and abrasion-resistant due to its special ripstop weave with reinforcement threads woven in at regular intervals.VisibilityReflective logo on the backRetro-reflective, fluorescent label on the back for better visibility and increased safety in low light conditions.Outer fabric14 oz CORDURA® stretch twillDurable 14 oz. twill fabric made from CORDURA®.

Bei der Liv Ladies Jacke hatte unser Designteam alle kreativen Freiheiten. Das Ergebnis? Ein leistungsstarkes Kleidungsstück mit einzigartigem Stil. Vom doppellagigen Revers über den Umlegekragen bis hin zum superweichen Leder ist Liv einfach eine der stilvollsten Jacken der REV'IT! Kollektion. Weiche Außenseite, schützende Innenseite Außen ist Liv vollständig aus hochwertigem Schafsleder gefertigt, das für seine weichen, geschmeidigen und leichten Eigenschaften bekannt ist. Die Innenseite besteht aus einer CE-zertifizierten Futter, das die Jahreszeiten ausdehnt und gleichzeitig eine höhere Klassifizierung für Abrieb- und Aufprallfestigkeit erreicht. AA-Einstufungen gibt es normalerweise nur für Tourenbekleidung. Liv für die Fahrt Armbündchen und Taschen mit Reißverschluss sorgen gleichermaßen für Stil und Substanz. Der CE-zertifizierte Schutz ist unauffällig: Es gibt SEESMART CE-Level 1 Protektoren an Schulter und Ellbogen sowie die Option, einen SEESOFT Rückenprotektor hinzuzufügen. Der reflektierende vertikale Streifen auf dem Rücken ist das einzige Indiz dafür, dass es sich um eine Motorradjacke handelt.FeaturesProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 both at normal and high (T+) ambient temperatures.Safety seamsThe seams determine the durability of a motorcycle garment in the event of a fall. That’s why REV’IT! uses safety seams only in areas at risk of impact. These have a visible and an invisible seam. This construction keeps the outer shell together even if the visible seam is worn through.SEESMART CE-Level 1 elbow protectorsSEESMART elbow protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 both at normal and high (T+) ambient temperatures.PocketsTwo front pocketsInner pocketFitSlim FitSlim Fit accentuates the natural body shape and provides a sleek and elegant appearance. It features a tighter and narrower cut that highlights certain body parts. Despite the slimmer profile, Slim Fit still offers plenty of comfort and freedom of movement where needed.FeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows the motorcycle jacket and pants to be connected as one unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Zip at the cuffThe zipper at the sleeve cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer layer and over your base layer.V-shaped cover strip at the cuffInsulationWind catcher behind the front zipperBehind the front zipper, there is a wind-blocking cover strip.Wind catcher behind cuff zipperLiningPolycotton twillPolyester stretchComfort-enhancing lining with integrated stretch.VisibilityReflective logo on the backRetro-reflective, fluorescent label on the back for better visibility and increased safety in low light conditions.Outer fabricSheep leatherSheep leather.

Die Maci Ladies Jacke verbindet urbanen Sportschhick mit dem Design-Ethos „weniger ist mehr“. Klare Linien und dezente Details bringen hochwertiges Rindleder zur Geltung, sodass du mühelos cool aussiehst, auch wenn du nicht auf zwei Rädern unterwegs bist. Außerdem bietet das weiche Leder nicht nur eine natürliche Isolierung, sondern auch eine hervorragende Abriebfestigkeit und passt sich nach und nach deine, Körper an, bis es perfekt auf dich zugeschnitten ist. Goldlöckchen-Zone Das ‚richtige‘ Gefühl zu finden, kann eine schwierige Aufgabe sein. Aber die sorgfältig konstruierte, anschmiegsame und stilvoll-sportliche Maci Ladies gibt dir den Bewegungsspielraum, den du dir wünschst, wenn du auf der Straße fährst. Das liegt an der körpernahen Passform, die sich an deine Figur anpasst, und an den flexiblen Textileinsätzen, die an den Seiten und den Innenarmen auf das Leder genäht sind. Diese Flexibilität zeigt dir, dass das Gefühl, genau ‚richtig‘ zu sein, vor allem von der Passform abhängt. Minimalismus mit mehr Das Design mag reduziert sein, aber Leistung, Schutz und Funktionalität der Jacke sind es nicht. Zwei fast unsichtbare, in die Nähte integrierte Fronttaschen mit Schlitz, dazu zwei clever versteckte Innentaschen, in denen du deine Wertsachen sicher verstauen kannst. Dank des Thermofutters trägst du die Jacke früh im Frühling und spät im Herbst, die zusätzlichen Reißverschlüsse an den Armbündchen und die praktische Jeansschlaufe verleihen dieser Jacke weit mehr als nur einen Wohlfühlfaktor.FeaturesInsulationRemovable thermal liningWind blocker behind the front zipperThere is a wind-blocking flap behind the front zipper.Wind blocker behind cuff zipperProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 shoulder protectorsSafety seamsThe seams determine the durability of a motorcycle garment in the event of a fall. That’s why REV’IT! uses only safety seams in areas at risk of impact. These have a visible and an invisible seam. This construction keeps the outer shell together, even if the visible seam is worn through.SEESMART CE-Level 1 elbow protectorsPocketsTwo front pocketsNapoleon inner pocketInner pocketFitSlim FitSlim Fit accentuates the natural body shape and provides a sleek and elegant appearance. It features a tighter and narrower cut that highlights certain body areas. Despite the slimmer profile, Slim Fit still offers plenty of comfort and freedom of movement where needed.FeaturesShort connection zipperJeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, so riding with a bare back is a thing of the past.Comfort collarThe comfort collar adds extra coziness at critical points. Here, an extra soft fabric creates a snug atmosphere.Cuff zipperThe zipper at the cuff serves multiple purposes. First, it allows for easy entry into the sleeve, second, it provides additional ventilation on warm days, and third, it allows you to wear the glove cuff between the jacket and the membrane.Soft collar edgeThe inside of the collar is equipped with a soft fabric for more wearing comfort.Stretch at the waistStretch in the sleevesStretch at the armholesStretchable cuffV-shaped flap at the cuffOuter fabricCowhide leatherThis garment uses cowhide leather for optimal fit and protection.Polyester stretchEmbossed leatherLiningMeshVisibilityReflective fabric on the backThis product features reflective fabric on the back to help motorcyclists be seen better in low light, bad weather, and/or at night. Feel free to adjust any specific terms or phrases to better fit your brand's voice or style!

The Montana H2O motorcycle jacket is the ideal garment for urban mobility, helping you tackle everything life throws at you on your daily commute to work. Most people would hardly suspect that it is a fully street-legal motorcycle jacket. In addition to the long, typical parkas we already offer for commuters, we thought it was time to provide a shorter jacket as well. The Montana H2O is made from 2L PWR|Shell material and features an integrated hydratex|Mesh G-Liner membrane that keeps the water out. To protect you, the Montana H2O is equipped with comfortable, lightweight, and ventilated SEESMART CE-Level 1 protectors at the elbows and shoulders. There is also a pocket for the optional SEESOFT CE-Level 2 back protector if you desire more safety. In the numerous waterproof pockets, you can store everything you need for your daily commute, regardless of the weather. With adjustment cords and tabs, you can tailor the fit to your body, and you can attach the jacket to motorcycle pants or jeans using the belt loops or the short connection zipper. Reflective elements on the back and the removable hood provide additional visibility. The removable thermal lining wraps you in warmth and luxury during rides on cold spring, autumn, and winter mornings. Without the inner lining, this motorcycle jacket is perfect for keeping you safe and comfortable from spring to early autumn. In the Montana H2O motorcycle jacket, you look good and stay dry.FeaturesInsulationRemovable thermal liningWaterproofinghydratex|Mesh G-LinerThe 100% waterproof hydratex|G-Liner coating is located on the mesh lining of the garment. The seams are sealed, making it completely waterproof. This maximizes comfort while ensuring the functional properties of the G-Liner construction.ProtectionPrepared for SEESOFT CE-Level 2 back protectorThe back pocket in this REV’IT! piece is tailored for the SEESOFT CE-Level 2 back protector type RV – an easy upgrade for even more safety.SEESMART CE-Level 1 elbow protectorsSEESMART CE-Level 1 shoulder protectorsSEESMART shoulder protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 CE-Level 1 at both normal and high (T+) ambient temperatures.VisibilityReflective logo on the backReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric.Laminated reflective material on the hoodReflective panels ensure excellent visibility, allowing the wearer to be seen from any direction. For a more refined look, the reflective panels are welded to the fabric. This also saves seams, which benefits safety.PocketsTwo front slip pocketsThree inner pocketsNapoleon inner pocketChest slip pocketArm pocketFeaturesShort connection zipperThe short connection zipper is the shorter, simpler, and quicker choice of our two connection zipper options. It allows you to connect the motorcycle jacket and pants as a unit. For comfort and safety.Jeans loopWith the loop on the back, the jacket can be connected to your jeans, preventing it from riding up, making rides with a bare back a thing of the past.Removable hoodThe zippered hood is easily removable from the jacket.Adjustable drawstring on the hoodAdjustment optionsAdjustment tab at the cuffsDrawstring for waist adjustmentOuter fabricPWR|Shell 2L