The heated Freedom H2O motorcycle glove features a sleek and elegant design with a fine grip feel, and of course, our THERMOTRONIC high-tech system. The THERMOTRONIC has four different heat levels (from low to high) that can be easily adjusted using the large button on the top of the glove. Thanks to the colored ring around the button, it is very easy to see which heat level is currently active. The exterior of the glove is made from flexible softshell material on the top and grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation, providing an immediate sense of comfort and protection against the cold. The use of a soft knuckle shell makes the gloves very comfortable to wear while still providing plenty of safety. The hydratex|Z-Liner construction guarantees 100% waterproofing. Additionally, there are reflective strips on the back of the hand to increase your visibility without disturbing the clean and fresh look of the glove. Not to forget the conductive fingertip, which allows you to operate touchscreens without having to take off the glove—a significant advantage in cold weather. The Freedom H2O motorcycle glove takes the fear out of winter.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.LiningTri-Fleece LiningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added bulk. The lining wicks moisture away to keep hands dry.High-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: the structure of high-pile fibers traps more air than regular fibers, providing natural insulation that retains warmth.InsulationExkin® Platinum® Insulation MaterialThermal InsulationFixed REV'IT! Thermotronic Heating SystemIntegrated 7.4V heating system with adjustable heat levels.ClosureWrist StrapElastic Drawstring at the CuffElastic drawstring for adjusting the glove cuff.Adjustment OptionsStretch Fabric on the FingersAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.ProtectionPWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderViscoelastic KnuckleThese knuckle protectors are made from viscoelastic rubber. They protect your finger knuckles from impacts while ensuring freedom of movement for the hand.FeaturesVisor WiperLong CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Battery Set for REV'IT! Thermotronic Heating TechnologySet with two 7.4V batteries and micro-USB cable.Outer FabricSoftshell 3LConductive Fabric on the FingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface, creating a water-absorbent fabric structure.Twill StretchDrum-dyed Water-Repellent Goat LeatherTaslanVisibilityLaminated Reflector on the Back of the HandLaminated Reflector on the Finger

The Bornite H2O Ladies Motorcycle Glove has been specifically designed for women. We want your hands to be safe and warm on days when winter temperatures would otherwise keep you from your daily ride. It’s easy to make winter-ready motorcycle gloves that keep your hands warm. However, it’s not so easy to ensure they still provide enough feel so you can comfortably and safely operate your two-wheeler. By using a firmly integrated Fiberfill® lining, you get plenty of warmth without losing the feel on the handlebars. Additionally, there’s a high-loft fur lining for more comfort and 100% waterproofing thanks to the hydratex membrane – we’ve packed in a lot of comfort. Practical safety features such as a visor wiper, soft knuckle protection, and a palm protector made of double-layered PWR|Shell for crash protection are also included. Finally, we’ve added reflective material to the fingers, back of the hand, and cuff so you can be seen better by other road users in low-light conditions. All in all, the Bornite H2O Ladies Glove has all the necessary features to keep you riding even when the winter cold tries to stop you.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.InsulationHigh-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, effectively retaining warmth.Fixed FiberfillClosureWrist StrapAdjustment OptionsStretch Fabric on the Back of the HandAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.ProtectionTemperfoam® KnucklePWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderFeaturesVisor WiperShort CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate your navigation or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate your navigation or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer Fabric600D PolyesterThis fabric made from polyester yarn is a perfect, adaptable material for areas with low impact risk. It offers high wearing comfort.Conductive Fabric on the FingertipsNo need to take off your gloves to operate your navigation or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface, creating a water-absorbent fabric structure.Twill StretchVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the Back HandBrand emblem made from laminated reflective material, which increases visibility.

The Bornite H2O motorcycle glove has everything you need to get through the cooler months. This model covers more than just your basic commuting needs; it comes standard with practical features for cold weather. The permanently integrated Fiberfill® lining provides ample warmth without compromising your feel for the handlebars. Because we all know that motorcycle gloves with too much insulation rob you of the right amount of riding sensation. The high-loft fur lining envelops your hands in comfort, while the hydratex membrane ensures 100% waterproofing. A visor wiper removes the moisture that restricts visibility on rainy days. The soft knuckle shell and double-layered inner hand protection made from PWR|Shell provide protection and flexibility. Reflective elements on the fingers, the back of the hand, and the cuff ensure your visibility in low-light conditions. There is an adjustment option at the wrist, and the stretch material provides a comfortable city fit. Thanks to the conductive fabric on the index finger and thumb, you don't have to take off the glove when using a touchscreen. With the Bornite H2O gloves, you won't want to miss any opportunity to get on your motorcycle.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.InsulationHigh-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, effectively retaining warmth.Fixed FiberfillClosureWrist StrapAdjustment OptionsStretch Fabric on the Back of the HandAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.ProtectionTemperfoam® KnucklePWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderFeaturesVisor WiperShort CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer Fabric600D PolyesterThis polyester yarn fabric is a perfect, adaptable material for areas with low impact risk. It offers high wearing comfort.Conductive Fabric on the FingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.Twill StretchVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the Back of the HandBrand emblem made from laminated reflective material, which increases visibility.

Der Boxxer 2 H2O with short cuff is one of our most popular motorcycle gloves for the city, proving itself even in suboptimal weather conditions. Its knitted cuff is both a style feature and a functional part. It ensures that the wrist is well covered, keeping the wind out. The firmly integrated Hydratex membrane makes it waterproof and breathable, while a cozy thermal lining keeps the frost at bay during urban adventures in winter. A hard-shell knuckle protector is integrated into the robust outer shell, providing impact protection and abrasion resistance in case a ride ends differently than planned. The Boxxer 2 H2O features an adjustable strap at the wrist, ensuring a secure fit. This glove is a safe, comfortable, and reliable partner for the city when the weather doesn't cooperate.FeaturesWaterproofnesshydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.VisibilityReflective material on the back of the handLiningTri-Fleece liningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added bulk. The lining wicks moisture away, keeping hands dry.ClosureElastic closureAdjustment optionsAdjustable strap at the wristThe adjustable strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.Stretch inserts on the fingersStretch inserts on the back of the handProtectionHard-shell knucklePWR|Shield on the palmPWR|Shield is created using a unique knitting technique, resulting in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.EVA foam on the finger knucklesEVA foam on the thumbTemperfoam® palm sliderFeaturesSuede visor wiperNULLKnitted cuffsThe knitted cuffs block the wind, providing warmth and comfort.Conductive fabric on the index fingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive fabric on the thumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer fabricGoat leatherChrome-tanned goat leather is known for its extreme abrasion resistance and is often used for gloves and other products where suppleness is important.Conductive fabric on the fingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Water-repellent treated suede leatherInsulationFixed Fiberfill

Manche Produkte sind so vielseitig, dass sie sich nur schwer in einer bestimmten Kategorie einordnen lassen, wie zum Beispiel der Cassini H2O Ladies. Dieser wasserdichte Softshell-Motorradhandschuh mit kurzer Stulpe ist der ideale Begleiter für alle, die ein Produkt suchen, das die richtige Menge an Schutz, Komfort und weiblicher Passform für den täglichen Gebrauch bietet, selbst wenn es regnet. Eine Hartschalen-Knöchelabdeckung sorgt für Aufprallschutz bei einem Sturz, genauso wie die abriebfeste Außenschale. Diese haben wir umfangreichen Tests unterzogen um sicherzustellen, dass die Sicherheit allen Anforderungen entspricht. Dank der McFit® Technologie geht dieser wasserdichte und atmungsaktive Motorradhandschuh keine Kompromisse beim Tragekomfort ein, sondern zeigt von Anfang an die richtige Passform und das richtige Tragegefühl. Der Cassini H2O Ladies verfügt über Reflexionen an den Fingern und ein reflektierendes Logo an der Stulpe für bessere Sichtbarkeit bei schlechten Lichtverhältnissen. Mit der leitfähigen Fingerspitze kannst du auch Touchscreens bedienen, ohne den Handschuh ausziehen zu müssen. Mit dem Cassini H2O Ladies Motorradhandschuh bleiben deine Hände warm und trockenFeaturesWaterproofnesshydratex|Z-Liner with McFit® technologyLiningJersey liningThanks to its uniquely dense knit pattern, jersey lining is smooth on one side and stable on the other. This makes it perfect as a comfortable and durable lining that retains its shape for a long time.Insulation3M™ Thinsulate™ G 100gThinsulate™ G insulation features large air pockets that trap heat. This keeps a garment very warm for an extended period, while also being lightweight and quick-drying.polar fleeceClosureVelcro closureProtectionHard shell knucklePWR|Shield on the palmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® palm sliderTemperfoam® on the thumb knuckleFeaturesShort cuffConductive fabric on the index fingerNo need to take off your gloves to operate the GPS or smartphone, thanks to the conductive fingertips designed specifically for touchscreens.Conductive fabric on the thumbNo need to take off your gloves to operate the GPS or smartphone, thanks to the conductive fingertips designed specifically for touchscreens.Insulation only on the back of the handAdjustabilityStretch inserts on the fingersAdjustable tab at the cuffOuter fabricConductive fabric on the fingertipsNo need to take off your gloves to operate the GPS or smartphone, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.PWR|Shell Twill StretchDrum-dyed goat leatherThis goat leather has been drum-dyed to ensure that the dye penetrates the leather of a garment or product to the maximum extent.VisibilityLaminated reflector on the fingerLaminated reflective logo on the cuff

Der Cayenne 2 Motorradhandschuh ist der ideale Sommerhandschuh in unserer Abenteuerkollektion. Er ist leicht, bequem und gibt ein Höchstmaß an Schutz, ohne dabei an Fingerfertigkeit einzubüßen, das sichert dir das ideale Gefühl für dein Motorrad. Dank der integrierten Atmungsaktivität durch die perforierten Lederpartien bleiben deine Hände bei warmen Temperaturen erfrischt und trocken. Ein spezielles Grip-Patch an Handfläche und Daumen bietet zusätzlichen Halt am Lenker, wenn die Fahrt technisch anspruchsvoller wird. Hartschalen-Knöchelprotektor, Handflächengleiter und Daumenprotektor bieten zusätzliche Abriebfestigkeit und Schutz im Falle eines Sturzes oder Aufpralls. Dank der leitfähigen Fingerspitze musst du den Handschuh nicht ausziehen, um durch deine Apps und die Welt zu navigieren. Der Cayenne 2 Motorradhandschuh ist so konzipiert, dass er sich wie eine zweite Haut anschmiegt und deine Hände bei Fahrten in warmem Wetter bequem und geschützt sind.FeaturesBelüftungPerforiertes LederBelüftungslöcherFutterTrikotfutterDank seines einzigartig dichten Webmusters ist Trikot-Futter geschmeidig auf der einen und stabil auf der anderen Seite. Deshalb eignet es sich perfekt als bequemes und langlebiges Futter, das seine Form sehr lange beibehält.VerschlussKlettverschlussElastik am HandgelenkSchutzTPU Hartschalen-KnöchelTemperfoam® am kleinen FingerSelbstformender Schaumstoff, der nicht CE-geprüft ist, aber über eine große Zahl aufprallresistenter Eigenschaften verfügt. Dieses Produkt wird dort eingesetzt, wo Beweglichkeit und Passform ein Muss sind, wie etwa an den Hüften. Temperfoam® gibt es in geschlossener wie in perforierter Version.Eingespritztes PU an den FingerknöchelREV’IT!-Handschuhe haben Schutzapplikationen auf Fingern und Knöcheln aus hartem PU-Verbundmaterial, um Ihre Hände bei einem Aufprall so gut wie möglich zu schützen..Eingespritztes PU am kleinen FingerTPU Hartschalen-HandflächenschleiferHandflächenschleifer bestehen aus haltbarem und hoch abriebfestem TPU-Material und befinden sich auf der Innenhand des Handschuhs. Sie sorgen dafür, dass der Handschuh sofort gleitet, wenn die Hand den Asphalt berührt. Die Abriebfestigkeit derart ausgestatteter Handschuhe ist enorm, das senkt das Verletzungsrisiko signifikant.Temperfoam® HandflächenschleiferTemperfoam® FingerknöchelDiesen selbstkonturierenden Schaum verwenden wir in Bereichen, in denen Beweglichkeit und guter Sitz ein Muss sind, z.B. an den Fingern. Temperfoam® gibt es in massiver oder perforierter Form.Temperfoam® am DaumenknöchelTPU Hartschalen-DaumenprotektorTemperfoam® an der StulpeTemperfoam® auf dem HandrückenPWR|GarnTPU HandrückenprotektorAn der Oberhand dieser Handschuhe verwenden wir Thermoplastisches Urethan (TPU), ein sehr widerstandsfähiges synthetisches Material, das zusätzlichen Aufprallschutz bietet und bei einem Sturz widerstandslos über den Asphalt rutscht.MerkmaleNormales BündchenAußen vernähtDie Nähte aus PWR|Yarn befinden sich außen am Handschuh. Das verhindert Druckstellen an den Nähten und sorgt für ein ultimatives Griffgefühl, das jeder Sportfahrer schätzt.Pittards® Digital™ Grip-EinsätzeLeitfähiges Gewebe am ZeigefingerHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.Leitfähiges Gewebe an den DaumenHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.SichtbarkeitReflektierendes Material am FingerLaminierter Reflektor auf dem HandrückenOberstoffZiegenlederGegerbtes Leder aus Ziegenhaut gilt als extrem abriebfest und wird oft verwendet für Handschuhe und andere Produkte, bei denen es auf Geschmeidigkeit ankommt.Perforiertes ZiegenlederLeitfähige LederfingerspitzenMit den leitfähigen Lederfingerspitzen muss man zur Bedienung eines Smartphones oder eines Navis nie mehr die Handschuhe ausziehen. Diese Fingerspitzen wurden eigens für Touch Screens entwickelt.Pittards® Ziege Digital™ WR100XTrommelgefärbtes ZiegenlederDieses Ziegenleder wurde trommelgefärbt, damit der Farbstoff maximal in das Leder eines Kleidungsstücks oder Produktes eindringen kann.HypalonVerstellmöglichkeitenVerstellsystem an Handgelenk und BündchenZiehharmonika-Aufbau

The Gore Grip technology prevents movement between the breathable, waterproof GORE-TEX membrane and the outer layer. In its construction, the Contrast GTX gloves combine perforated goat leather on the palm with PWR|Shell textile stretch on the back of the hand. And thanks to the Pittards® Planette sheepskin inserts on the palms and thumbs, you can rely on excellent grip, sensitivity, and feel to maintain optimal control under all conditions. Making Miles Motorcycle tours in summer often mean long rides and the possibility of sudden rain showers. However, these cannot dampen your day when you wear the Contrast GTX. A range of technical features ensures that your hands stay pleasantly dry, allowing you to focus entirely on the road. A pull tab at the wrist helps you quickly remove the glove. However, you won't need to do that if you have to operate a touchscreen. For that, there are the conductive fingertips on the index finger and thumb. As Robust as TPU The cuffs of the Contrast GTX consist of a hard shell and foam, while Temperfoam® on the fingers, palms, and thumbs provides protection without restricting your freedom of movement. And when the going gets tough, a palm slider and a thumb protector made of thermoplastic polyurethane (TPU) minimize the risk of injury if your hands hit the ground. Additionally, a Velcro closure ensures a secure fit. This glove looks good, feels good, and makes it incredibly hard not to like it.FeaturesWaterproofingGORE-TEX Gloves + Gore Grip TechnologyThe GORE-TEX glove lining is waterproof, windproof, and highly breathable. The GORE Grip technology uses an innovative construction that enhances dexterity and grip feel for the ideal hold on the handlebars.ClosureVelcro ClosureWrist StrapElastic at the WristAdjustment OptionsStretch Fabric on the Back of the HandStretch Fabric on the FingersAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.Stretch Fabric on the ThumbAdjustment Tab at the CuffStretch at the Arm CuffProtectionTPU Hard Shell Palm SliderPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inner hand of the glove. They ensure that the glove slides immediately when the hand touches the asphalt. The abrasion resistance of such equipped gloves is enormous, significantly reducing the risk of injury.Temperfoam® Palm SliderTemperfoam® on the Thumb KnuckleTPU Hard Shell Thumb ProtectorSoft TPR Knuckle ProtectionTemperfoam® under the Knuckle ProtectorHigh-quality viscoelastic foam that adapts to the rider's knuckles, enhancing comfort and protection.FeaturesVisor WiperLong CuffAnti-Slip Material on the PalmA grip patch made from a textured fabric improves grip.Anti-Slip Material on the ThumbConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone? Not anymore, thanks to the conductive fingertips specially designed for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone? Not anymore, thanks to the conductive fingertips specially designed for touchscreens.Outer MaterialPWR|Shell StretchNULLConductive Leather FingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically developed for touch screens.PU-Coated FabricFlock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.Drum-Dyed Water-Repellent Goat LeatherVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the FingerLiningPushpull Trifleece LiningComfort-enhancing lining for GORE-TEX models.

The Dominator 3 GTX glove has been developed for riding around the world. It is perfect for all weather conditions you may encounter on the road or off-road. The reason: GORE-TEX with Gore Grip technology ensures that your hands stay warm in the cold and dry when you sweat. The exterior is made from various types of leather, all selected for the level of safety and comfort they provide. In addition to the TPU hard shell protectors on the thumb, fingers, and palm, this glove is equipped with two-component protectors. These are perforated to allow airflow, refreshing your hands and keeping them in the comfort zone.FeaturesVisibilityReflective material on the little fingerClosureVelcro closureElastic at the wristAdjustment optionsAdjustable strap at the wristThe adjustable strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.Stretch inserts on the fingersStretch inserts on the back of the handProtectionTPU hard shell palm slidersPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inside of the glove. They ensure that the glove glides immediately when the hand touches the asphalt. The abrasion resistance of gloves equipped this way is enormous, significantly reducing the risk of injury.Temperfoam® palm slidersTemperfoam® knuckle protectionWe use this self-conforming foam in areas where mobility and a good fit are a must, such as on the fingers. Temperfoam® is available in solid or perforated form.Temperfoam® on the thumb knuckleVentilated two-component protectorThe two-component protector consists of a 3D pre-shaped honeycomb structure made of TPU, covered by a highly impact-resistant aluminum cover for optimal sliding properties. These lightweight parts significantly increase the rider's safety without the high weight of conventional plastic protectors. The hard shells are perforated for better ventilation, greatly improving wearing comfort.Injected TPR finger protectorsTPR is fatigue-free, tear-resistant, and has excellent impact absorption, making it ideal for use as knuckle protection. Injected into the outer shell, it provides enormous freedom of movement.TPU hard shell thumb protectorPWR|YarnFeaturesVisor wiperStandard cuffExternally stitchedThe seams made from PWR|Yarn are located on the outside of the glove. This prevents pressure points at the seams and provides an ultimate grip feel that every sport rider appreciates.Pull tabWhen the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm.Anti-slip material on the palmA grip patch made from a textured fabric improves grip.Conductive fabric on the index fingerNo more need to take off your gloves to operate the GPS or smartphone, thanks to the conductive fingertips specially designed for touchscreens.Conductive fabric on the thumbNo more need to take off your gloves to operate the GPS or smartphone, thanks to the conductive fingertips specially designed for touchscreens.Outer materialConductive leather fingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens.Drum-dyed water-repellent goat leatherWater-repellent Goat Digital goat leatherWaterproofnessGORE-TEX gloves + GORE Grip technologyThe GORE-TEX glove lining is waterproof, windproof, and highly breathable. The GORE Grip technology uses an innovative construction that improves dexterity and grip feel for the ideal grip on the handlebars.

The sporty Duty Ladies is the first choice for the adventurer looking for a lightweight, comfortable, and well-ventilated glove. A motorcycle glove that offers a high level of comfort and control while you master the curves on your favorite mountain roads. This pair of gloves has been designed to give you an optimal feel for the handlebars and levers while keeping your hands comfortable and refreshed throughout the ride. To achieve this, we combine a grippy microfiber fabric with a silicone print on the palm and a highly ventilated 3D mesh on the backhand. Your hands are well protected by a comfortable, soft knuckle guard, TPR on the fingers, and Temperfoam® on the thumb, as well as a palm protector made of PWR|Shield. Putting on and securing the Duty is super easy thanks to the strap at the cuff and the Velcro closure at the cuff. With the integrated conductive fingertip, you can operate your touchscreen devices without having to take off the motorcycle gloves. All in all, the Duty Ladies motorcycle glove is perfectly equipped for you to fully enjoy your next adventure on winding asphalt.FeaturesVentilationPerforated leatherFully ventilated 3D AirMeshVisibilityReflective stretch inserts on the fingersLiningTri-Fleece liningThis polyester jersey fabric is used as glove lining and brushed to achieve better insulation without added thickness. The lining wicks moisture away to keep your hands dry.ClosureVelcro closureAdjustment optionsStretch fabric on the fingersStretch inserts on the fingersAdjustment strap at the cuffProtectionTemperfoam® knucklePWR|Shield on the palmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® palm sliderTemperfoam® finger knuckleThis self-contouring foam is used in areas where mobility and a good fit are a must, such as on the fingers. Temperfoam® is available in solid or perforated form.Temperfoam® on the thumb knuckleInjected TPR finger protectorsTPR is fatigue-free, tear-resistant, and has excellent impact absorption, making it ideal for use as knuckle protection. Injected into the outer shell, it provides enormous freedom of movement.Temperfoam® at the cuffPWR|YarnSoft TPR knuckle protectionFeaturesShort cuffOutside stitchedThe seams made of PWR|Yarn are located on the outside of the glove. This prevents pressure points at the seams and provides an ultimate grip feel that every sport rider appreciates.Pull tabWhen the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm.Silicone grip coating on the palmAnti-slip material on the palmA grip patch made of textured fabric enhances grip.Conductive fabric on the index fingerNo more need to take off your gloves to operate the navigation or smartphone thanks to the conductive fingertips designed specifically for touchscreens.Conductive fabric on the thumbNo more need to take off your gloves to operate the navigation or smartphone thanks to the conductive fingertips designed specifically for touchscreens.Pre-shaped fingersOuter fabric3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.Automan stretchThe Automan stretch fabric is used to protect the rider while providing a close-fitting, elastic silhouette that optimizes comfort.Conductive leather fingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or navigation device. These fingertips have been specially designed for touch screens.MicrofiberMicrofiber yarn is only one-fifth the thickness of a human hair. It is elastic and can wick moisture away.Drum-dyed goat leatherThis goat leather has been drum-dyed to ensure that the dye penetrates maximally into the leather of a garment or product.

These are the minimalist Antigo H2O gloves designed for beginners: An intelligent waterproof solution for urban riders navigating the city streets in bad weather. Covering the basics With the water-repellent hydratex|Z-liner construction, your hands stay dry. Check. The high-loft fur lining and tri-fleece inner lining keep your hands warm. Double check. Thanks to the cuff with pull tab, you can easily put on and take off the gloves. So many checks. Not to mention the Velcro closure and wrist strap that ensure an ideal fit, or the suede visor wiper that wipes away the rain. Being entry-level doesn’t mean lacking in essential features. Safety in mind The SEESOFT 3D knuckle protector, the memory foam under the knuckle protector (for added hand comfort), and the reinforcing and strong double layer of PWR|Shield construction on the palm are also included. With the Antigo H2O gloves, you can reach your destination without worrying about the safety of your hands. Features Waterproofness hydratex|Z-Liner A waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection. Lining Tri-Fleece Lining This polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added bulk. The lining wicks moisture away to keep hands dry. High-Loft Fur Lining This type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, providing natural insulation that retains warmth. Closure Velcro Closure Wrist Strap Adjustability Stretch Fabric on the Back of the Hand Adjustable Strap at the Wrist The adjustable strap at the wrist with Velcro ensures an optimal fit and perfect adjustment. This way, the glove always fits snugly yet comfortably. Adjustable Tab at the Cuff Protection PWR|Shield on the Palm PWR|Shield is created using a unique knitting technique, resulting in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm. Memory Foam Under the Knuckle Protector Viscoelastic foam that adapts to the rider's knuckles, enhancing comfort and protection. SEESOFT 3D Knuckle This knuckle protector is made from impact-absorbing SEESOFT memory foam, which reduces the impact forces in the event of an accident. Ortholite® UltraLite Comfort Foam on the Palm This glove is equipped with OrthoLite® UltraLite comfort foam on the palm, providing a pleasant wearing experience while also offering shock absorption for added protection. Features Suede Visor Wiper NULL Standard Cuff Pull Tab When the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm. Conductive Fabric on the Index Finger No need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens. Conductive Fabric on the Thumb No need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens. Outer Fabric Softshell 3L Water-Repellent Treated Suede Drum-Dyed Water-Repellent Goat Leather Microfiber e-touch Visibility Laminated Reflector on the Finger Laminated Reflection on the Little Finger The laminated reflection on the little finger serves as both a design detail and a safety feature in low-light situations. Insulation Fixed Fiberfill Sustainability C0 DWR (Durable Water-Repellent Coating)

With the Livengood 2 GTX gloves, you can master any tour. With a whole arsenal of GORE-TEX grip impregnation, insulation, and safety features, your hands are not only protected from the elements but also from unexpected events on the road. Wet Weather Warrior The designation "GTX" means that these gloves are equipped with GORE-TEX. With the semi-bound GORE-TEX grip construction, it not only means strong waterproofing but also less volume and more tactile feel in the hands. Your hands stay dry and comfortable. Happy Hands 200 grams of PrimaLoft® Gold on the back of the hand and 60 grams of PrimaLoft® Gold Eco on the palm and between the fingers form a cold-fighting duo ready for the next challenge. The high-loft fur lining combined with the push-pull tri-fleece lining ensures that your hands stay in top shape. Safety First The safety component of the Livengood 2 GTX gloves rounds out the trio of essential features. The hard-shell knuckle is supported by Temperfoam® for added comfort and protection. Additionally, there is a TPU hard-shell palm slider. Its outer shell is made of durable yet flexible goat leather and suede, reinforced with PWR|Shell stretch.FeaturesWaterproofingGORE-TEX Gloves + Gore Grip TechnologyThe GORE-TEX glove lining is waterproof, windproof, and highly breathable. The GORE Grip technology uses an innovative construction that enhances dexterity and grip feel for the ideal hold on the handlebars.ClosureVelcro ClosureWrist StrapAdjustment OptionsStretch Fabric on the Back of the HandStretch Fabric on the FingersAdjustable Strap at the WristThe adjustable strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.Stretch Inserts on the FingersStretch Inserts on the BackhandAdjustable Tab at the CuffStretch at the Arm CuffProtectionHard-Shell KnuckleInjected PU on the Finger KnucklesREV’IT! gloves feature protective applications on fingers and knuckles made from hard PU composite material to protect your hands as much as possible in the event of an impact.TPU Hard-Shell Palm SliderPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inner hand of the glove. They ensure that the glove slides immediately when the hand touches the asphalt. The abrasion resistance of gloves equipped this way is enormous, significantly reducing the risk of injury.Temperfoam® Palm SliderTemperfoam® on the Thumb KnuckleTemperfoam® under the Knuckle ProtectorHigh-quality viscoelastic foam that adapts to the rider's knuckles, enhancing comfort and protection.FeaturesVisor WiperStandard CuffPull TabWhen the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm.Anti-Slip Material on the PalmA grip patch made from a textured fabric enhances grip.Anti-Slip Material on the ThumbConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer MaterialSoftshell 3LPWR|Shell StretchNULLConductive Leather FingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens.PU-Coated FabricFlock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.Inner Goat Leather, Outer SuedeDrum-Dyed Water-Repellent Goat LeatherVisibilityLaminated Reflective Logo on the FingerLiningPushpull Trifleece LiningComfort-enhancing lining for GORE-TEX models.High-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: the structure of high-pile fibers traps more air than normal fibers, keeping warmth in.InsulationPrimaLoft® Gold 200gPrimaLoft® Gold Eco with Grip Control 60g

Der Taurus 2 GTX is the crowning achievement of our winter touring glove collection. For the dedicated motorcyclist who demands the best waterproofing, insulation, protection, and features to keep riding even in the harshest conditions. Water stays out The designation "GTX" means that these gloves are equipped with GORE-TEX Grip. The semi-bound construction not only provides strong waterproofing but also less bulk and more tactile feel in the hands, keeping them dry and comfortable. The double cuff closure is another functional and clever solution to prevent water from entering the Taurus 2 GTX gloves when the rain is heavy. Additionally, the Push-Pull Tri-Fleece lining helps wick sweat away from your hands while you ride actively, because we know you can sweat even in the cold, especially when navigating technical terrain. No chance for the cold 200 grams of PrimaLoft® Gold on the back of the hand and 60 grams of PrimaLoft® Gold Eco with Grip Control on the palm create a cold-fighting duo ready for the next challenge. It is an art to provide top-notch insulation without taking up much space. However, it is a challenge we have faced over the years, and it keeps getting better. Next-level functionality The stretch inserts on the index and middle fingers, as well as on the back of the hand, enhance dexterity. Not to mention the TPR protection on the index, middle, and little fingers, the TPU palm slider, SEESOFT on the thumb, ample laminated reflection for better visibility, and drainage eyelets at the cuff – the functional features are endless. You will also find a visor wiper on the index finger and thumb to clear your visor of water accumulations while on the go. And because we take things to the next level, we mix leather and textile with different textures to make the Taurus 2 GTX gloves both functional and visually appealing.FeaturesWaterproofingGORE-TEX gloves + Gore Grip technologyThe GORE-TEX glove lining is waterproof, windproof, and highly breathable. The GORE Grip technology uses an innovative construction that enhances dexterity and grip feel for the ideal hold on the handlebars.ClosureVelcro closureWrist strapDouble cuff closureAdjustment optionsStretch fabric on the back of the handStretch fabric on the fingersStretch fabric on the thumbElastic band at the cuffIntegrated elastic material in the cuff ensures comfort and fit.ProtectionTPR finger knucklesTPU hard shell knucklesTemperfoam® on the little fingerSelf-forming foam that is not CE certified but has a large number of impact-resistant properties. This product is used where mobility and fit are a must, such as at the hips. Temperfoam® is available in both closed and perforated versions.TPU hard shell palm sliderPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inner hand of the glove. They ensure that the glove slides immediately when the hand touches the asphalt. The abrasion resistance of gloves equipped this way is enormous, significantly reducing the risk of injury.Temperfoam® palm sliderTemperfoam® finger knucklesWe use this self-contouring foam in areas where mobility and good fit are a must, such as on the fingers. Temperfoam® is available in solid or perforated form.Temperfoam® on the thumb knuckleTPR knuckle protection for little fingerThe rubber-like TPR protection on the finger knuckles provides comfort and impact protection.SEESOFT on the thumbOur proprietary SEESOFT impact protection is integrated directly into the thumb of the glove.FeaturesVisor wiperStandard cuffPull tabWhen the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm.Anti-slip material on the palmA grip patch made from textured fabric improves grip.Anti-slip material on the thumbConductive fabric on the index fingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive fabric on the thumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Drainage eyelets at the cuffDrainage eyelets at the cuff ensure that what doesn't belong can escape.Outer materialSoftshell 3LPWR|Shell Ripstop-StretchDue to its special ripstop weaving method, durability and abrasion resistance are among the special characteristics of PWR|Shell. Thick threads woven in a cross pattern at regular intervals prevent the fabric from tearing.Conductive leather fingertipsWith conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens.Water-repellent treated suede leatherDrum-dyed water-repellent goat leatherPWR | Four-way stretchA highly abrasion-resistant outer material that is stretchable and stable in two directions, thus protecting the rider.3L hydratex fabrichydratex is our own three-layer, waterproof, and technical fabric. It keeps you dry and on the move.VisibilityLaminated reflector on the back of the handLaminated reflective logo on the fingerThe laminated reflective logo on the finger is both a design detail and a safety feature in low light conditions.Laminated reflective logo on the cuffA laminated reflective logo on the cuff is both a design detail and a safety feature in low light conditions.LiningPushpull Trifleece liningComfort-enhancing lining for GORE-TEX models.High-loft fur liningThis type of insulation mimics the natural insulating properties of animal fur: the structure of high-pile fibers traps more air than normal fibers, enclosing warmth.InsulationPrimaLoft® Gold 200gPrimaLoft® Gold Eco with Grip control 60g

These are the minimally designed Wayden H2O gloves: An intelligent waterproof solution with a short cuff for urban riders who conquer the city streets in less favorable weather. Covering the basics With the water-repellent construction made from hydratex|Z-liner, your hands stay dry. Check. The high-loft fur lining and tri-fleece inner lining keep your hands warm. Double check. Thanks to the cuff with a pull tab, you can easily put on and take off the gloves. So many checks. Not to mention the Velcro closure and cuff tab that ensure an ideal fit, or the suede visor wiper that wipes away the rain. Entry-level does not mean a lack of important features. Safety in mind The SEESOFT 3D knuckle protector, memory foam under the knuckle protector (for additional hand comfort), and a reinforcing and strong double layer of PWR|Shield on the palm are also included. With the Wayden H2O gloves, you reach your destination without worrying about the safety of your hands.FeaturesWaterproofnesshydratex|Z-LinerA waterproof layer, laminated to a carrier, forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.LiningTri-Fleece LiningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added thickness. The lining wicks moisture away to keep hands dry.High-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than normal fibers, and this natural insulation retains heat.ClosureVelcro ClosureAdjustment OptionsStretch Fabric on the Back of the HandAdjustment Tab at the CuffProtectionPWR|Shield on the PalmPWR|Shield is created using a unique knitting technique, resulting in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Memory Foam under the Knuckle ProtectorViscoelastic foam that adapts to the rider's knuckles, enhancing comfort and protection.SEESOFT 3D KnuckleThis knuckle protector is made from impact-absorbing SEESOFT memory foam, which reduces the impact forces that occur in the event of an accident.Ortholite® UltraLite Comfort Foam on the PalmThis glove is equipped with OrthoLite® UltraLite comfort foam on the palm, providing a pleasant wearing experience while also offering shock absorption for additional protection.FeaturesSuede Visor WiperNULLShort CuffPull TabWhen the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm.Conductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer FabricSoftshell 3LWater-repellent Treated Suede LeatherDrum-dyed Water-repellent Goat LeatherMicrofiber e-touchVisibilityLaminated Reflector on the FingerLaminated Reflection on the Little FingerThe laminated reflection on the little finger is both a design detail and a safety feature in low-light situations.InsulationFixed FiberfillSustainabilityC0 DWR (Durable Water Repellent Coating)

Der Cassini H2O Handschuh mit kurzer Stulpe ist genauso vielseitig wie er aussieht. Für den Stadtverkehr eignet er sich perfekt, er meistert aber auch Fahrten im Regen problemlos. Dafür steht das mit Hydratex® ausgestattete, wasserdichte und atmungsaktive Innenfutter gerade. Den Tragekomfort stellt die mcFIT-Technologie sicher, den Schutz vor Verletzungen der Hartschalen-Knöchelprotektor und eine abriebfeste Außenhülle. Zur Serienausstattung des Cassini H2O zählen leitfähige Fingerspitzen, die ermöglichen die Bedienung von Touchscreens, ohne dass Sie den Handschuh ausziehen müssen.FeaturesWasserdichtigkeithydratex|Z-Liner mit McFit®-TechnologieFutterTrikotfutterDank seines einzigartig dichten Webmusters ist Trikot-Futter geschmeidig auf der einen und stabil auf der anderen Seite. Deshalb eignet es sich perfekt als bequemes und langlebiges Futter, das seine Form sehr lange beibehält.Isolierung3M™ Thinsulate™ G 100gThinsulate™ G Isolierung verfügt über große Lufttaschen, die Wärme einschließen. Dadurch bleibt ein Kleidungsstück über einen langen Zeitraum sehr warm, außerdem wiegt es wenig und trocknet schnell.polar fleeceVerschlussKlettverschlussSchutzHartschalenknöchelPWR|Shield auf der HandflächePWR|Shield entsteht in einer einzigartigen Stricktechnik, aus der ein Gewebe mit unübertroffener Schnitt-, Reiß- und Abriebfestigkeit entspringt. Dieses Produkt besitzt PWR|Shield auf der Handfläche.Temperfoam® HandflächenschleiferTemperfoam® am DaumenknöchelMerkmaleKurze StulpeLeitfähiges Gewebe am ZeigefingerHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.Leitfähiges Gewebe an den DaumenHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.Isolierung nur am HandrückenVerstellmöglichkeitenStretcheinsätze an den FingernVerstelllasche am BündchenOberstoffLeitfähiges Gewebe an den FingerspitzenHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.Flock-PUFlocking heißt der Prozess, bei dem kleine Faserpartikel (Flock genannt) auf eine Oberfläche aufgebracht werden. Dadurch einsteht eine wasseraufnahmefähige Gewebestruktur.PWR|Shell Twill-StretchTrommelgefärbtes ZiegenlederDieses Ziegenleder wurde trommelgefärbt, damit der Farbstoff maximal in das Leder eines Kleidungsstücks oder Produktes eindringen kann.SichtbarkeitLaminierter Reflektor am FingerLaminiertes reflektierendes Logo am Finger

Der Chevron 3 Handschuh ist eine weitere Evolution eines Dauerbrenners in unserer Kollektion. Die nunmehr dritte Generation baut auf der Reputation ihrer Vorgänger auf. Neben weiteren Verbesserungen in Bewegungsfreiheit und Tragekomfort während der Fahrt hat der Chevron 3 mit kurzer Stulpe ein komplett neues Design erhalten. Das verleiht ihm einen zukunftsträchtigen Stil, der zu unserer gesamten Sportkollektion passt. Sein mattfarbener Knöchelprotektor aus Carbon und der Hartschalen-Handflächenschleifer offerieren besten Aufprallschutz, weiterer Schutz vor Verletzungen kommt durch abriebfestes, teilweise perforiertes Leder.

Die Kombination der hochwertigen, atmungsaktiven Wasserdichtigkeit des GORE-TEX Z-Liners mit der komfortsteigernden Exkin® Platinum® und 3M™ Thinsulate™ Isolierung würde schon ausreichen, um einen ernstzunehmenden Winterhandschuh zu kreieren. Aber mit dem Fusion 3 GTX hat unsere Forschungs- und Entwicklungsabteilung noch einen draufgesetzt. Hightech in höchster Qualität Das Innere des Handschuhs wurde speziell für die Verwendung mit Heizgriffen erdacht. Es leitet die Wärme weiter, während die Finger vor Kälte von außen geschützt sind. So hilft der Fusion 3 GTX nicht nur, die Körperwärme in diesen schnell unterkühlten Körperteilen zu halten, sondern er nutzt auch aktiv die Wärme der Griffe. Die Hightech-Isolierung hält deine Finger auf Temperatur, während das weiche, pelzähnliche Innenfutter für ein angenehmes Tragegefühl sorgt, ohne das Griffgefühl zu beeinträchtigen. Vom Sport inspirierte Innovation Das schützende Äußere des Handschuhs besteht aus fassgefärbtem Ziegenleder mit wasserabweisender Beschichtung, 3L-Softshell-Gewebe und PWR|Shell Stretch, das die Temperfoam®-Knöchelschützer bedeckt. Die gleiche dämpfende Temperfoam®-Polsterung findet sich auch unter dem TPU-Hartschalen-Handflächenschieber – direkt übernommen aus unseren Sporthandschuhen, als ein herausragendes sportinspiriertes Designelement, das den leistungsorientierten und innovativen Designansatz der Fusion 3 GTX-Handschuhe hervorhebt.FeaturesWasserdichtigkeitGORE-TEX Z-LinerIsolierungExkin® Platinum® Isoliermaterial3M™ Thinsulate™ G 100gThinsulate™ G Isolierung verfügt über große Lufttaschen, die Wärme einschließen. Dadurch bleibt ein Kleidungsstück über einen langen Zeitraum sehr warm, außerdem wiegt es wenig und trocknet schnell.VerschlussKlettverschlussHandgelenksriemenVerstellmöglichkeitenStretchgewebe am HandrückenStretchgewebe an den FingernVerstellriemen am HandgelenkDer Einstellriemen am Handgelenk mit Klett sorgt für optimalen Sitz und perfekte Passform. So sitzt der Handschuh immer eng und dennoch bequem.Stretcheinsätze an den FingernStretchgewebe am DaumenVerstelllasche am BündchenStretch am ArmbündchenSchutzHartschalenknöchelTemperfoam® am kleinen FingerSelbstformender Schaumstoff, der nicht CE-geprüft ist, aber über eine große Zahl aufprallresistenter Eigenschaften verfügt. Dieses Produkt wird dort eingesetzt, wo Beweglichkeit und Passform ein Muss sind, wie etwa an den Hüften. Temperfoam® gibt es in geschlossener wie in perforierter Version.Eingespritztes PU an den FingerknöchelREV’IT!-Handschuhe haben Schutzapplikationen auf Fingern und Knöcheln aus hartem PU-Verbundmaterial, um Ihre Hände bei einem Aufprall so gut wie möglich zu schützen..TPU Hartschalen-HandflächenschleiferHandflächenschleifer bestehen aus haltbarem und hoch abriebfestem TPU-Material und befinden sich auf der Innenhand des Handschuhs. Sie sorgen dafür, dass der Handschuh sofort gleitet, wenn die Hand den Asphalt berührt. Die Abriebfestigkeit derart ausgestatteter Handschuhe ist enorm, das senkt das Verletzungsrisiko signifikant.Temperfoam® HandflächenschleiferTemperfoam® am DaumenknöchelTemperfoam® unterm KnöchelprotektorHochwertiger viskoelastischer Schaum, der sich den Knöcheln des Fahrers anpasst und so Komfort und Schutz verbessert.MerkmaleVisierwischerNormales BündchenZuglascheWird die Lasche am Bündchen fest verschlossen, kann der Fahrtwind nicht in den Ärmel gelangen, die Arme bleiben warm.Anti-Rutsch-Material auf der HandflächeEin Grip-Patch aus einem texturierten Gewebe verbessert den Griff.Anti-Rutsch-Material am DaumenLeitfähiges Gewebe am ZeigefingerHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.Leitfähiges Gewebe an den DaumenHandschuhe ausziehen, um das Navi oder Smartphone zu bedienen? Nicht mehr nötig dank der extra für Touchscreens entwickelten, leitfähigen Fingerspitzen.Isolierung nur am HandrückenOberstoffSoftshell 3LPWR|Shell StretchNULLLeitfähige LederfingerspitzenMit den leitfähigen Lederfingerspitzen muss man zur Bedienung eines Smartphones oder eines Navis nie mehr die Handschuhe ausziehen. Diese Fingerspitzen wurden eigens für Touch Screens entwickelt.Flock-PUFlocking heißt der Prozess, bei dem kleine Faserpartikel (Flock genannt) auf eine Oberfläche aufgebracht werden. Dadurch einsteht eine wasseraufnahmefähige Gewebestruktur.Trommelgefärbtes wasserabweisendes ZiegenlederSichtbarkeitLaminiertes reflektierendes Logo an der StulpeLaminiertes reflektierendes Logo am FingerFutterPushpull-Trifleece-FutterKomfortsteigerndes Futter für GORE-TEX Modelle.High-Loft PelzfutterDiese Art der Isolierung ahmt die natürlichen Isolier-Eigenschaften eines Tierpelzes nach: Die Struktur aus hochflorigen Fasern speichert mehr Luft als normale Fasern, diese natürliche Isolierung schließt die Wärme ein.

The Hawk Ladies is a perfect blend of style and function. This summer motorcycle glove with a short cuff features a variety of protective functions and is specifically tailored for women's hands. It is made from supple yet durable goat leather, providing great comfort while hard knuckle protectors and guards on the fingers and palm offer adequate impact protection. Stretch areas ensure freedom of movement and an excellent feel through the handlebars, making this motorcycle glove a must-have for warm summer rides. With the Hawk Ladies motorcycle glove, you can make the most of summer.FeaturesVentilationVentilation holesLiningTri-Fleece liningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added bulk. The lining wicks moisture away to keep hands dry.ClosureVelcro closureElastic at the wristProtectionHard shell knucklesPWR|Shield on the palmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.PU finger knucklesREV’IT! gloves feature protective caps made from a hard PU compound on the fingers and knuckles. This provides optimal protection for the hands in the event of an impact.Temperfoam® palm slidersTemperfoam® finger knucklesWe use this self-contouring foam in areas where mobility and a good fit are essential, such as the fingers. Temperfoam® is available in solid or perforated form.FeaturesShort cuffAnti-slip material on the palmA grip patch made from a textured fabric enhances grip.Anti-slip material on the thumbConductive fabric on the index fingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive fabric on the thumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Pre-shaped fingersAdjustabilityStretch inserts on the fingersStretch inserts on the backhandAdjustable tab at the cuffOuter materialConductive leather fingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips are specially designed for touch screens.Drum-dyed goat leatherThis goat leather is drum-dyed to ensure that the dye penetrates the leather of a garment or product to the maximum extent.

The Hawk is a perfect blend of style and function. This summer motorcycle glove with a short cuff features a variety of practical functions. It is made from supple yet durable goat leather and includes knuckle protection as well as protection for the fingers and palm. Stretch inserts provide freedom of movement and an excellent feel on the handlebars, making them a must-have for warm summer rides. With the Hawk motorcycle glove, you can make the most of summer.FeaturesVentilationVentilation holesLiningTri-Fleece liningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added bulk. The lining wicks moisture away to keep hands dry.ClosureVelcro closureElastic at the wristProtectionHard shell knucklesPWR|Shield on the palmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.PU finger knucklesREV’IT! gloves feature protective caps made from a hard PU compound on the fingers and knuckles. This provides optimal protection for the hands in the event of an impact.Temperfoam® palm sliderTemperfoam® finger knucklesThis self-contouring foam is used in areas where mobility and a good fit are essential, such as the fingers. Temperfoam® is available in solid or perforated form.FeaturesShort cuffAnti-slip material on the palmA grip patch made from a textured fabric enhances grip.Anti-slip material on the thumbConductive fabric on the index fingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive fabric on the thumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Pre-shaped fingersAdjustabilityStretch inserts on the fingersStretch inserts on the backhandAdjustable tab at the cuffOuter materialConductive leather fingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens.Drum-dyed goat leatherThis goat leather is drum-dyed to ensure that the dye penetrates the leather of a garment or product to the maximum extent.

Experience for yourself what our MotoGP and WorldSBK riders feel race after race at their fingertips. Slip into the groundbreaking Jerez 3 glove, co-developed by our top riders. Just for you. We guarantee – from the construction in kangaroo leather to the patented accordion design on the back of the hand, which ensures you unparalleled freedom of movement while protecting your upper hand. Every tiny detail of this handcrafted glove has been examined under a microscope to ensure it delivers as reliably and trustworthily as you do on the throttle. Additionally, the Jerez 3 can be as colorful as you are. Thanks to its various shades, you can wear it tone-on-tone with your leather suit or dare to try something completely different. The choice is yours. Wear what the professionals wear.FeaturesVentilationVentilation holesLiningAramid liningAramid is the fabric from which Kevlar® is made. These fibers provide extreme durability with high flexibility.Tri-Fleece liningThis polyester jersey fabric is used as glove lining and is brushed to achieve better insulation without added thickness. The lining wicks moisture away to keep your hands dry.ClosureVelcro closureWrist strapDouble cuff closureAdjustment optionsAdjustable strap at the wristThe adjustable strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.Stretch inserts on the fingersProtectionTwo-component protector at the cuffTPU aluminum protector for shoulders, elbows, and knuckles. The two-component protector consists of a pre-shaped 3D honeycomb structure made of TPU material, covered by an aluminum protective shell for the best sliding properties. This lightweight hard shell significantly increases the level of protection without the extra weight of traditional plastic shells. When fighting against acceleration forces, every gram counts! Ergonomically shaped CE protectors are placed under the shoulder and elbow shells for maximum impact absorption while allowing freedom of movement.TPU hard shell palm slidersPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inside of the glove. They ensure that the glove slides immediately when the hand touches the asphalt. The abrasion resistance of gloves equipped this way is enormous, significantly reducing the risk of injury.Ventilated two-component protectorThe two-component protector consists of a 3D pre-shaped honeycomb structure made of TPU, covered by a highly impact-resistant aluminum cover for the best sliding properties. These lightweight parts significantly enhance rider safety without the high weight of conventional plastic protectors. The hard shells are perforated for better ventilation, greatly improving comfort.Ventilated two-component protectorThe two-component protector consists of a 3D pre-shaped honeycomb structure made of TPU, covered by a highly impact-resistant aluminum cover for the best sliding properties. These lightweight parts significantly enhance rider safety without the high weight of conventional plastic protectors. The hard shells are perforated for better ventilation, greatly improving comfort.TPU hard shell finger knucklesThermoplastic polyurethane (TPU) is a highly durable plastic used in many REV'IT! products for impact and moisture protection.TPU hard shell on the little fingerTPU hard shell thumb protectorTRYONIC impact protection technologyPWR|YarnCharacteristicsLong cuffOutside stitchedThe seams made of PWR|Yarn are located on the outside of the glove. This prevents pressure points at the seams and provides an ultimate grip feel that every sport rider appreciates.Pittards® Digital™ Grip insertsOuter materialKangaroo leatherKangaroo leather is used in the construction of this product.3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.Cowhide leatherThis garment uses cowhide leather for optimal fit and protection.Synthetic PU leatherPittards® Goat Digital™ WR100X

Every experienced long-distance adventurer knows that the hands bear the brunt of what the weather brings. With the Lacus GTX, you don't have to worry about the weather, not even sudden downpours or heavy storms. The GORE-TEX membrane keeps your hands and wrists dry because it makes both the natural and synthetic materials used in the construction of this glove waterproof. Materials that make a difference The main component is soft, drum-dyed goat leather on the palm and back of the hand. It combines strength and flexibility with all-weather suitability; the water-repellent coating of the leather makes the Lacus GTX a great waterproof glove for all occasions. Additionally, the fine Pittards® sheepskin at the contact points of the palm and thumb ensures a firm grip when it matters. Practical for adventures When you're on an adventure, your hands are the tools you use the most. The Lacus GTX provides protection for these essential extremities in the form of a mix of hard shell and memory foam that envelops the hands and wrists. Should you hit the asphalt, a TPU hard shell palm slider significantly reduces the risk of injury, while Temperfoam® along the fingers, at the thumb, and on the palms protects your hands without restricting your freedom of movement. Plus, there is a thumb protector, so thumbs up for adventurers. Features Waterproofing GORE-TEX gloves + Gore Grip technology The GORE-TEX glove lining is waterproof, windproof, and highly breathable. The GORE Grip technology uses an innovative construction that enhances dexterity and grip feel for the ideal hold on the handlebars. Closure Velcro closure Wrist strap Elastic at the wrist Adjustment options Stretch fabric on the fingers Adjustment strap at the wrist The adjustment strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably. Stretch inserts on the fingers Adjustment tab at the cuff Protection Hard shell knuckles TPU hard shell palm slider Palm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inner hand of the glove. They ensure that the glove glides immediately when the hand touches the asphalt. The abrasion resistance of such equipped gloves is enormous, significantly reducing the risk of injury. Temperfoam® palm slider Temperfoam® at the thumb knuckle TPU hard shell thumb protector Temperfoam® under the knuckle protector High-quality viscoelastic foam that adapts to the rider's knuckles, improving comfort and protection. Features Suede visor wiper NULL Long cuff Pull tab When the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm. Anti-slip material on the palm A grip patch made from a textured fabric improves grip. Anti-slip material on the thumb Conductive fabric on the index finger No need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens. Conductive fabric on the thumb No need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens. Outer fabric PWR|Shell Stretch NULL Conductive leather fingertips With the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens. PU-coated fabric Water-repellent treated suede leather Drum-dyed water-repellent goat leather Visibility Laminated reflector on the finger Laminated reflective logo on the finger Lining Pushpull Trifleece lining Comfort-enhancing lining for GORE-TEX models.

Jede erfahrene Langstreckenabenteurerin weiß, dass die Hände die Hauptlast dessen tragen, was das Wetter so mit sich bringt. Mit dem Lacus GTX Ladies musst du dir keine Gedanken über das Wetter machen, nicht einmal über plötzliche Regengüsse oder schwere Stürme. Die GORE-TEX Membran hält deine Hände und Handgelenke trocken, weil sie sowohl die natürlichen wie auch die synthetischen Materialien, die bei der Konstruktion dieses Handschuhs verwendet werden, wasserdicht macht. Materialien, die den Unterschied machen Der Hauptbestandteil ist weiches, trommelgefärbtes Ziegenleder auf der Handfläche und dem Handrücken. Es kombiniert Stärke und Flexibilität mit Allwettertauglichkeit, die wasserabweisende Beschichtung des Leders macht den Lacus GTX Ladies zu einem großartigen, wasserdichten Handschuh für alle Gelegenheiten. Außerdem garantiert das feine Pittards® Schafsleder an den Kontaktpunkten von Handfläche und Daumen festen Zugriff, wenn es darauf ankommt. Praktisch bei Abenteuern Wenn du ein Abenteuer erlebst, sind deine Hände das Werkzeug, das du am meisten benutzt. Der Lacus GTX Ladies bietet Schutz für diese elementaren Extremitäten in Form einer Mischung aus Hartschale und Memory-Schaum, die Hände und Handgelenke umhüllt. Solltest du auf den Asphalt treffen, verringert ein TPU-Hartschalen-Handflächengleiter das Verletzungsrisiko erheblich, während Temperfoam® entlang der Finger, an den Daumen und auf den Handflächen deine Hände schützt, ohne deine Bewegungsfreiheit einzuschränken. Außerdem gibt es einen Daumenschutz und deshalb auch einen Daumen hoch für Abenteurer.FeaturesWaterproofnessGORE-TEX Gloves + Gore Grip TechnologyThe GORE-TEX glove lining is waterproof, windproof, and highly breathable. The GORE Grip technology uses an innovative construction that enhances dexterity and grip feel for the ideal hold on the handlebars.ClosureVelcro ClosureWrist StrapElastic at the WristAdjustment OptionsStretch Fabric on the FingersAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.Stretch Inserts on the FingersAdjustment Tab at the CuffProtectionHard Shell KnucklesTPU Hard Shell Palm SliderPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inner hand of the glove. They ensure that the glove slides immediately when the hand touches the asphalt. The abrasion resistance of such equipped gloves is enormous, significantly reducing the risk of injury.Temperfoam® Palm SliderTemperfoam® on the Thumb KnuckleTPU Hard Shell Thumb ProtectorTemperfoam® under the Knuckle ProtectorHigh-quality viscoelastic foam that adapts to the rider's knuckles, enhancing comfort and protection.FeaturesSuede Visor WiperNULLLong CuffPull TabWhen the tab at the cuff is securely closed, the wind cannot enter the sleeve, keeping the arms warm.Anti-Slip Material on the PalmA grip patch made from textured fabric improves grip.Anti-Slip Material on the ThumbConductive Fabric on the Index FingerNo more need to take off your gloves to operate the GPS or smartphone thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo more need to take off your gloves to operate the GPS or smartphone thanks to the conductive fingertips designed specifically for touchscreens.Outer FabricPWR|Shell StretchNULLConductive Leather FingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens.Water-Repellent Treated Suede LeatherDrum-Dyed Water-Repellent Goat LeatherVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the FingerLiningPushpull Trifleece LiningComfort-enhancing lining for GORE-TEX models.

The Lava H2O Ladies Motorcycle Glove is designed to help you endure the colder months of the year in safety and comfort. Comfort and control are combined in this winter-ready glove, specifically crafted for the female hand. To keep your hands warm, cozy, and dry, the Lava H2O Ladies is equipped with a permanently integrated Fiberfill® lining, a high-loft fur lining, and a 100 percent waterproof hydratex membrane. An intelligent visor wiper clears your visor of raindrops. Injury protection is provided by the soft TPR knuckle shell, Temperfoam® on the thumb, and Temperfoam® and PWR|Shell on the palm. All of this results in a complete, safe, winter-ready motorcycle glove. To enhance visibility, we have carefully positioned many reflectors, and since feel and fit go hand in hand, a lot of stretch material and an adjustable option at the wrist have been incorporated. The Lava H2O Ladies Motorcycle Glove won’t let you down and ensures a clear path when winter tries to hold you back.FeaturesWaterproofnesshydratex|Z-LinerA waterproof layer, laminated to a carrier, forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.InsulationHigh-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, and this natural insulation retains heat.Fixed FiberfillClosureWrist StrapAdjustabilityStretch Fabric on the Back of the HandAdjustable Strap at the WristThe adjustable strap at the wrist with Velcro ensures an optimal fit and perfect comfort. This way, the glove always fits snugly yet comfortably.ProtectionTemperfoam® KnucklesPWR|Shield on the PalmPWR|Shield is created using a unique knitting technique, resulting in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderSoft TPR Knuckle ProtectionFeaturesVisor WiperShort CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer Fabric600D PolyesterThis fabric made from polyester yarn is a perfect, adaptable material for areas with low impact risk. It offers high wearing comfort.Conductive Fabric on the FingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.Twill StretchVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the Back of the HandBrand emblem made from laminated reflective material, which increases visibility.

The Lava H2O motorcycle glove offers ideal hand protection for the colder months. It covers your basic commuting needs and provides a balanced mix of comfort and control. The permanently integrated Fiberfill® lining delivers the right amount of warmth without hindering your ability to operate the handlebars. The high-loft fur lining ensures comfort, while the hydratex membrane guarantees 100% waterproofing. This glove features an integrated visor wiper, allowing you to wipe away raindrops that may obstruct your view on wet days. Injury protection comes from a comfortable, soft TPR knuckle protector and Temperfoam® on the thumb. The palm is secured with Temperfoam® and PWR|Shell. The Lava H2O has reflective elements on the fingers, the back of the hand, and the cuff, ensuring better visibility in low-light conditions. At the wrist, you will find an adjustment option, and the stretch material provides a comfortable city fit. Thanks to the conductive fabric on the index finger and thumb, you can keep the gloves on while using a touchscreen. With the Lava H2O motorcycle glove, you can ride even in lower temperatures.FeaturesWaterproofinghydratex|Z-LinerA waterproof layer laminated to a carrier forms the REV’IT! hydratex|Z-Liner membrane. The carrier fabric protects the membrane from damage, and the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining and the outer fabric. The REV’IT! hydratex|Z-Liner membrane is used in garments that require a high level of all-weather protection.InsulationHigh-Loft Fur LiningThis type of insulation mimics the natural insulating properties of animal fur: The structure of high-pile fibers traps more air than regular fibers, providing natural insulation that retains warmth.Fixed FiberfillClosureWrist StrapAdjustment OptionsStretch Fabric on the Back of the HandAdjustment Strap at the WristThe adjustment strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.ProtectionTemperfoam® KnucklePWR|Shield on the PalmPWR|Shield is created using a unique knitting technique that results in a fabric with unmatched cut, tear, and abrasion resistance. This product features PWR|Shield on the palm.Temperfoam® Palm SliderSoft TPR Knuckle ProtectorFeaturesVisor WiperShort CuffConductive Fabric on the Index FingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Conductive Fabric on the ThumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Outer FabricPolyester 600DThis polyester yarn fabric is a perfect, adaptable material for areas with low impact risk. It offers high wearing comfort.Conductive Fabric on the FingertipsNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips designed specifically for touchscreens.Flock-PUFlocking is the process of applying small fiber particles (called flock) to a surface. This creates a water-absorbent fabric structure.Twill StretchVisibilityLaminated Reflector on the FingerLaminated Reflective Logo on the CuffLaminated Reflective Logo on the Back of the HandBrand emblem made from laminated reflective material, which increases visibility.

Der League 2 leather glove utilizes all the insights from MotoGP to provide you with both track-ready performance and street-appropriate protection and comfort. And it does so with a styling that gives you the confidence of a pole position contender. Design for Comfort The robust construction you can rely on even at high speeds is fully adjustable at the wrist with double Velcro closures. The smoothest leathers available – cowhide, sheep, and drum-dyed goat – come together for high strength. Nine leathers and textiles are stitched together so you can maintain grip, dexterity, and feel on the handlebars and thus control your motorcycle at all times. Protect and Connect The hard shell covers protect wrists, fingers, and knuckles, while Temperfoam®, pre-shaped contours, and plenty of stretch ensure that the gloves fit as they should: snugly. You can even use your smartphone without having to take off the League 2, as an innovative conductive yarn is sewn into the fingertip, making communication easier for you. Quite literally a clever idea.FeaturesVentilationVentilation holesLiningTri-Fleece liningThis polyester jersey fabric is used as glove lining and brushed to achieve better insulation without added thickness. The lining wicks moisture away to keep hands dry.ClosureVelcro closureWrist strapDouble cuff closureElastic at the wristAdjustment OptionsAdjustable strap at the wristThe adjustable strap at the wrist with Velcro ensures an optimal fit and perfect fit. This way, the glove always sits snugly yet comfortably.Stretch inserts on the fingersStretch inserts on the thumbStretch inserts on the backhandAdjustable tab at the cuffStretch on the palmStrategically placed stretch insert on the palm improves dexterity.ProtectionTPU hard shell knuckleTemperfoam® on the little fingerSelf-forming foam that is not CE certified but has a large number of impact-resistant properties. This product is used where mobility and fit are a must, such as at the hips. Temperfoam® is available in both closed and perforated versions.TPU hard shell palm sliderPalm sliders are made from durable and highly abrasion-resistant TPU material and are located on the inside of the glove. They ensure that the glove slides immediately when the hand touches the asphalt. The abrasion resistance of gloves equipped this way is enormous, significantly reducing the risk of injury.Temperfoam® palm sliderTemperfoam® finger knuckleWe use this self-contouring foam in areas where mobility and good fit are a must, such as on the fingers. Temperfoam® is available in solid or perforated form.Temperfoam® on the thumb knuckleTPU hard shell finger knuckleThermoplastic polyurethane (TPU) is a highly durable plastic used in many REV'IT! products for impact and moisture protection.TPU hard shell on the little fingerTPU cuff protectorWe use thermoplastic polyurethane (TPU) – a highly durable plastic – on the cuffs of these gloves as additional impact protection and for improved sliding properties.PWR|YarnTemperfoam® under the knuckle protectorHigh-quality viscoelastic foam that adapts to the rider's knuckles, enhancing comfort and protection.FeaturesLong cuffOutside stitchedThe seams made from PWR|Yarn are located on the outside of the glove. This prevents pressure points at the seams and provides an ultimate grip feel that every sport rider appreciates.Anti-slip material on the palmA grip patch made from textured fabric improves grip.Anti-slip material on the thumbConductive fabric on the index fingerNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips specially designed for touchscreens.Conductive fabric on the thumbNo need to take off your gloves to operate the GPS or smartphone anymore, thanks to the conductive fingertips specially designed for touchscreens.Pre-shaped fingersOuter Fabric3D Air MeshThis knitted fabric has an open, three-dimensional structure that ensures good ventilation while riding. 3D AirMesh is a must for long-distance riders.CowhideCowhide is used in this garment for optimal fit and protection.Conductive leather fingertipsWith the conductive leather fingertips, you never have to take off your gloves to operate a smartphone or GPS. These fingertips were specifically designed for touch screens.PWR|Shell 500D StretchMade from 100% high-performance polyamide yarns, PWR|Shell 500D offers the best properties of nylon: high melting point, excellent tear and abrasion resistance, and outstanding durability. Plus, it features the typical REV’IT! design. The special PWR|Shell fabric comes in a stretch variant. 500D refers to the strength of the fabric. The higher the number, the better the abrasion and tear resistance.PU-coated fabricSynthetic PU leatherDrum-dyed water-repellent goat leatherDrum-dyed stay soft goat leatherDrum-dyed goat leather for lasting softness.