Touratech Suspension Lowering -35mm Yamaha 700 Tenere from 2019 Type Explore HP/PDS

€1,069.00

Available, delivery time: 3-5 Tage

Ask a question about this product

Product number: 1021-01-632-5865-0

Product information "Touratech Suspension Lowering -35mm Yamaha 700 Tenere from 2019 Type Explore HP/PDS"

This shock absorber is perfect for reducing the seat height (-35mm) for the Yamaha 700 Tenere. At the same time, your Yamaha 700 Tenere remains well-tuned and very suitable for touring. More performance and comfort for your Yamaha 700 Tenere with the Touratech Suspension Shock Absorber Type Level2. The Level2 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. Even with this design the PDS is installed. A hydraulic bottoming protection that prevents bottoming out even under the most extreme trail conditions with full luggage. Mechanical overload of the shock absorber is prevented. The damping works depending on the stroke. In the predominant driving operation, the shock absorber responds finely and is tuned for comfort and energy-saving.

Important points at a glance:
=> The shock absorber is configured based on our experiences for the Yamaha 700 Tenere and is ready to ride.
=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.
=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.
=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.
=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps.
This severely adversely affects the motorcycle's handling.

Note:
For the safe stand of your Yamaha 700 Tenere after lowering, we recommend shortening the side stand.

Scope of delivery:
- Ready-to-install shock absorber -35mm.
- ABE documents
- Installation instructions / user manual

Do you have further questions? We are happy to advise you personally, please contact us

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Touratech Progressive Fork Springs for Yamaha 700 Tenere from 2019 Lowering by -35mm

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of -35mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the Yamaha 700 Tenere and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for * Yamaha 700 Tenere from 2019*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.=> You can find the matching components for your Yamaha 700 Tenere in the accessories of this article. “Please scroll down”Delivery includes:- Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes. - Installation instructions with setup information, Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

€189.00