Motorcycle Battery HJT12B-FPZ-S JMT Lithium-Ion High Power 7AH

Lithium-ion batteries from JMT, high-tech for your motorcycle.

Batteries of the latest generation identifiable by the red housing cover.

Spacer (S)

The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery box.

Waterproof (W)

The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.

By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort.

The following advantages speak for JMT lithium-ion batteries:

- about 1/3 the weight of a comparable lead-acid battery

- unbeatable cost/weight savings ratio

- can be installed in any position, as it contains no acid

- contains no heavy metals

- balanced discharge/charge of all cells through balancer

- fast charging with high current possible (up to 90% in 6 min)

- very low self-discharge (max. 5% per month)

- still good performance at high temperatures up to 60°C

- safe technology and long lifespan

Lead-acid batteries can only utilize 30% of their capacity due to their specific properties,

while lithium-ion batteries can utilize nearly 100% of their capacity.

For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance.

A uniform state of charge of all cells is also ensured by a built-in processor ("balancer").

The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters.

The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.

Please note that only suitable chargers should be used for charging. We recommend JMP chargers.

The maximum recommended charging currents can be found in the technical specifications below.

Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging.

The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.

The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.

Technology

JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing.

This ensures that they cannot catch fire or explode under normal operating conditions.

The technology and manufacturing process guarantee the highest safety standards for lithium batteries.

- 12 V maintenance-free lithium-ion battery

- Recommended charging current 3.5 A

- Maximum charging current for fast charging 28 A

Comparable in dimensions and connections with:
Yuasa manufacturer number
YT12B-BS
YT14B-BS