Koffer-Tragetasche / -Transporttasche / -Aufbewahrungstasche

TOURATECH Zega Mundo aluminum case Sidecases preassembled silver 31 liters item Description  The consistent development of the ZEGA Cases! Pure functionality in a clear design - Made in Niedereschach manufactured with modern production techniques, is the Zega Mundo a simple, robust and shapely aluminum case, which dealt with all applications of everyday life to adventure with flying colors. The nearly indestructible body made of 1.5 mm aluminum sheet is especially riveted, to ensure maximum strength. With the integrated generously dimensioned sealing strip and the specially shaped profile at the upper edge of the trunk body of the ZEGA Mundo is absolutely sealed and rigid. The extensive range of accessories Zega makes the Mundo an individual transport system for extreme use.  - body made of 1.5 mm thick aluminum Designed for Extremeinsatz- available with 31, 38 or 45 liters volume Proven high-quality lockable Edelstahlbeschläge- ergonomically shaped fastening nuts in Kofferinneren- absolute tight and verwindungssteif- absolute fit without clearance even after thousands Pistenkilometern- fast assembly prevents automatic lock that locks accidentally aufgehen- fitted locks can without drilling or filing retrofitted werden- Compatible with Zega accessories Made in EUDer Zega Mundo continues the tradition of the legendary Zega Case. A simple, robust and shapely aluminum case, which was all applications of everyday life to adventure with flying colors bewältigt.Bei the development of the ZEGA Mundo focus one hundred percent on pure functionality. Practicality, robustness and technical-clear design bundle in this Aluminiumkoffer.Um to achieve a connection with maximum strength, the resilient body made of 1.5 millimeter thick aluminum sheet is connected to the conclusions drawn from one piece of aluminum ground with special rivets. This concept gives the suitcase also a rich extra rigidity. Furthermore, an integrated, extra generously sized sealing tape for optimum sealing the interface provides. The same applies to the specially shaped profile which forms the upper end of the case body. It stiffens the suitcase and makes the integrated sealing lip, which summarizes positively in the profile of the lid, for a weather-resistant closure. Manner of construction and choice of materials combine the experience of over two decades of adventure and expeditions on the toughest courses in the world. The materials absorb hours and days long vibration on corrugated roads as well as peak loads that occur during fast driving through deep bumps. The high expansion and penetration resistance of the material ensures maximum resistance when in contact with an obstacle or - at worst - in the fall. Manufactured at Niedereschach, the Mundo benefits from the advanced technologies, which are used in the manufacture of the variants Zega Pro and Zega Pro2. It complement the precision computer-controlled machines and profound know-how intensively trained skilled workers. Like the other cases the Zega family is also equipped with high quality of Mundo, lockable stainless steel fittings. These not only allow a complete removal of the cover, they can also serve as a hinge so that the lid can be opened as required forward or backward. the suitcase with the ten thousand times proven system Touratech to the model-specific constructed, piste solid supports from 18x2 steel tube is attached. The large, once knurled fastening nuts inside the case are now ergonomically shaped the Zega Mundo, to allow for even easier operation. The fast installation and a completely backlash-free fit, even after thousands of kilometers of slopes have made this system the first choice in the long-distance scene. But the new ZEGA Mundo can carry a lot more than just luggage reliably from A to B. The extensive range of accessories Zega makes from the Mundo an individual transport system. There is a choice for the ZEGA Mundo three sizes of 31, 38 or 45 liters (s) volume. And not least the Mundo in its unfussy elegance is timeless, beautiful to seeing part of European Wertarbeit.ZEGA Mundo aluminum case 31 Liter.Maße: 443 mm x 203 mm x 393 mmWeight: about 4.18 kg

Until now, our pre-assembled Touratech ZEGA Pro cases were only available as a set with the case carriers, but they are now also available individually. The special feature is that the mounting kit, which attaches the case to the carrier, has already been assembled by Touratech.Time-consuming drilling and measuring are a thing of the past. No wobbling or slipping; the pre-assembled case fits perfectly on the Touratech case carrier. The locks are operated from the inside and secure your case theft-proof to the carrier. The case can be easily removed without tools. With a modern design and at the highest technical level, our developers have created a masterpiece with the ZEGA Pro. Light yet sturdy, the case, which has a capacity of 38 liters, is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, while the bottom and shell part are high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected. The extremely robust protective strip on the body is screwed on and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from one side only; the locks serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four mounting eyes do not protrude significantly beyond the case surfaces, allowing for comfortable sitting on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Vehicle-specific case systems, e.g., for the BMW R1200GS, F800GS, KTM 690 Enduro, and many more, are also available. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust and at the same time easy to use. Advantages at a glance:- Automatic locking prevents the locks from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same key for installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugs.ZEGA Pro Aluminum Case 38 Liters:Dimensions: 443 mm x 243 mm x 393 mmWeight: approx. 5.2 kg

All the know-how from several hundred thousand ZEGA cases and countless kilometers around the world has gone into the development and production of the new ZEGA case.Beautifully designed, robust, and state-of-the-art, the case meets all requirements. Made from 1.5 mm thick aluminum using a novel process here in Niedereschach, the case is waterproof and dustproof, and extremely durable. The robust plastic protective strips on the corners and the bottom edge are screwed on and can thus be replaced. You can find the matching case systems for the respective motorcycle types.All the advantages of the ZEGA PRO cases have also been incorporated into the development of the matching top case.The ZEGA Pro cases and top cases are also available in two anodized variants. The anodized version not only shines with a super beautiful look in natural aluminum or black, but the extra thick and hard anodized layer prevents aluminum abrasion inside the case and effectively protects the surface of the case from discoloration.Rapid-Trap"Quickly" remove the ZEGA case without opening the lid - with the "Rapid-Trap adapter," it's no longer a problem! With the new Rapid-Trap technology from Touratech, you can quickly and easily remove the entire case without having to open it. Unlock, turn, remove! Attaching the cases is even friendlier: hook in, click, done! "To mount the "ZEGA Pro TopCase with Rapid-Trap," you need a vehicle-specific "Luggage Bridge ZEGA Pro Topcase." (You can find this in the category for your vehicle under "Case Carriers.")"- Optional lockable accessories: Lid lock: 050-0870RapidTrap lock: 050-0871Length: 31.5 cmWidth: 40.0 cmHeight: 30.0 cmThe helmet is not included in the delivery.

All the know-how from several hundred thousand ZEGA cases and countless kilometers around the world has gone into the development and production of the new ZEGA PRO case.Beautifully designed, robust, and state-of-the-art, the case meets all requirements. Made from 1.5mm thick aluminum using a novel process here in Niedereschach, the case is waterproof and dustproof, and extremely durable. The robust plastic protective strips on the corners and the bottom edge are screwed on and can thus be replaced. You can find the matching case systems for the respective motorcycle types.All the advantages of the ZEGA PRO cases have also been incorporated into the development of the matching top cases.The ZEGA PRO cases and top cases are also available in two anodized variants. The anodized version not only shines with a super beautiful look in natural aluminum or black, but the extra thick and hard anodized layer prevents aluminum abrasion inside the case and effectively protects the surface of the case from discoloration.Rapid-Trap"Quickly" remove the Zega case without opening the lid - with the "Rapid-Trap adapter," this is no longer a problem! With the new Rapid-Trap technology from Touratech, you can quickly and easily remove the entire case without having to open it. Unlock, turn, remove! Attaching the cases is even friendlier: hook in, click, done! "To mount the "Zega Pro TopCase with Rapid-Trap," you need a vehicle-specific "Luggage Bridge ZegaPro Topcase." (You can find this in the category for your vehicle under "Case Carriers.")"- Optional lockable accessories: Lid lock: 050-0870RapidTrap lock: 050-0871Length: 31.5 cmWidth: 40.0 cmHeight: 30.0 cmThe helmet is not included in the delivery.

Until now, our pre-assembled Touratech ZEGA Pro cases were only available as a set with the case carriers, but they are now also available individually. The special feature is that the mounting kit, which attaches the case to the carrier, has already been assembled by Touratech.Time-consuming drilling and measuring are a thing of the past. No wobbling or slipping; the pre-assembled case fits perfectly on the Touratech case carrier. The locks are operated from the inside and secure your case theft-proof to the carrier. The case can be easily removed without tools. With a modern design and at the highest technical standard, our developers have created a masterpiece with the ZEGA Pro. Light yet sturdy, the case, which has a capacity of 31 liters, is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!*And-S*:The anodized version of the ZEGA Pro not only shines with a great look in natural aluminum but also effectively prevents abrasion inside the case. The extra thick, high-quality anodized layer provides special surface protection and prevents color changes.The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, while the bottom and shell part are high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected. The extremely robust protective strip on the body is screwed on and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from one side; the locks serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four mounting eyes do not protrude significantly beyond the case surfaces, allowing for comfortable sitting on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Vehicle-specific case systems, e.g., for the BMW R1200GS, F800GS, KTM 690 Enduro, and many more, are also available. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust and at the same time easy to use. The advantages at a glance:- Automatic locking prevents the locks from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same key for installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugs.ZEGA Pro Aluminum Case "And-S" 31 Liters:Dimensions: 443 mm x 203 mm x 393 mmWeight: approx. 4.9 kg

Until now, our pre-assembled Touratech ZEGA Pro cases were only available as a set with the case carriers, but they are now also available individually. The special feature is that the mounting kit, which attaches the case to the carrier, has already been assembled by Touratech.Time-consuming drilling and measuring are a thing of the past. No wobbling or slipping; the pre-assembled case fits perfectly on the Touratech case carrier. The locks are operated from the inside and secure your case against theft on the carrier. The case can be easily removed without any tools. With a modern design and at the highest level of technology, our developers have created a masterpiece with the ZEGA Pro. Light yet sturdy, the case, which has a capacity of 31 liters, is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!"And-Black":The anodized version of the ZEGA Pro not only shines with a great black appearance but also effectively prevents abrasion inside the case. The extra thick, high-quality anodized layer provides special protection for the surface and prevents color changes.The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, while the bottom and shell part are high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected. The extremely robust protective strip on the body is screwed on and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from one side; the locks serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four mounting eyes do not protrude significantly beyond the case surfaces, allowing for comfortable sitting on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Vehicle-specific case systems, e.g., for the BMW R1200GS, F800GS, KTM 690 Enduro, and many more, are also available. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust and at the same time easy to use. The advantages at a glance:- Automatic locking prevents the locks from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same key for installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugs.ZEGA Pro Aluminum Case "And-Black" 31 Liters:Dimensions: 443 mm x 203 mm x 393 mmWeight: approx. 4.9 kg