Batterie Motorrad HJTX14AH-FP JMT Alternative: 7070027

Lithium-ion batteries JMT, high tech for your motorcycle. the latest generation of batteries identified by the red cover. Spacer (S) battery is equipped with one or more spacers which are taped with adhesive tape under the battery so that the battery fits exactly into the battery box. Waterproof (W) The battery is fully waterproof and is not damaged when the motorcycle is cleaned with high pressure. Indicator (I) all batteries with a battery condition - equipped Indicator. Simply press the test button. Lights all three blue LEDs on the battery fully (ful) is loaded. Only light two LEDs, it is loaded only half (med). No later than when only one LED (low), the battery needs to be charged. QuattroPole (Q) battery is equipped with four pole terminals. Depending on which way round incorporating the battery, the positive terminal is disposed on the left or right, characterized the battery replaced very many conventional lead-acid batteries in use. With the replacement of a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort. The following advantages in favor of lithium-ion batteries JMT: - about 1/3 of the weight of comparable lead acid battery unrivaled ratio of cost / Gewichtsersparnis- mountable in any position, since no acid contains no included- Schwermetalle- balanced discharge / charge of all cells by balancer- fast charging with high charging current (up to 90% in 6 min) - (max. 5% per month) very low self-discharge - even at high temperatures still good performance up to 60 ° C safe technology and high life lead-acid batteries can only use 30% of their capacity due to the specific properties, while in lithium-ion batteries almost 100% of the capacity can be used. For this reason, the lithium versions of JMT batteries for the same start power need only 1/3 of the capacity of a comparable lead-acid battery. A uniform state of charge of all cells is also through a built-in processor ( "balancer") sichergestellt.Die dimensions of the lithium-ion batteries using adapters correspond to the dimensions of the original lead-acid batteries. The connections are identical, so the battery can be replaced in a few minutes without further adjustments. Please note that only suitable for charging chargers may be used. We recommend JMP chargers. The maximum recommended charge currents please refer to the below technical data Under no circumstances may be used chargers, trying to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they start the actual charge. The maximum charging voltage of 14.9 volts may be exceeded under any circumstances. Risk of explosion. The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius. JMT art lithium-ion batteries as a cathode material using iron phosphate (LiFePO4), and use the lithium-polymer process in the manufacture. This allows them to rise even explode either in flames during normal operation. The technique and method of manufacture to ensure the highest safety standards for lithium batteries. - 12 V maintenance-free lithium-ion battery charging current recommended 2.5 A maximum charging current for quick charge 24 A comparable in dimensions and connections with: Yuasa manufacturer number YTX14AH-BSYB14-A2YB14A-A1YB14A-A2YB14-B2YTX14AHL-BSYTX14LBSYB14L-A1YB14L-A2YB14L- B2SYB14L-A2SYB14L-B212N14-3A