TEXA Adapter Cable for Motorcycle Control Unit Diagnosis Adapter cable 3151/AP37 for serial diagnosis of the manufacturer BMW. Compatible with all vehicles from the production year 1999 to August 2016. Not compatible with Euro-4 vehicles (manufactured from September 2016) with OBD socket. The cable can also be used for the manufacturers GG TECHNIK, ROSENBAUER and on the models HUSQVARNA Nuda 900/R, TR 650 Strada, TR 650 Terra.

Lithium-ion batteries JMT, high tech for your motorcycle. the latest generation of batteries identified by the red cover. Spacer (S) Battery is equipped with one or more spacers which are taped with adhesive tape under the battery so that the battery fits exactly into the battery box. Waterproof (W) The battery is fully waterproof and is not damaged when the motorcycle is washed with high pressure. Indicator (I) All batteries are equipped with a battery condition - equipped Indicator. Simply press the test button. Lights all three blue LEDs on the battery fully (ful) is loaded. Only light two LEDs, it is loaded only half (med). No later than when only one LED (low), the battery needs to be charged. With the replacement of a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort. Following advantages speak for JMT lithium-ion batteries: - about 1/3 of the weight of comparable lead acid battery - unbeatable ratio of cost / weight saving because they contain can be installed in any position, no acid - - does not contain heavy metals - balanced discharge / charge of all cells by Balancer - quick charge with a high charging current (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and high durability Lead-acid batteries can only use 30% of their capacity due to the specific properties, while in lithium-ion batteries almost 100% of the capacity can be used. For this reason, the lithium versions of JMT batteries for the same start power need only 1/3 of the capacity of a comparable lead-acid battery. A steady state of charge of all cells is also ensured by a built-in processor ( "balancer"). The dimensions of the lithium-ion batteries using adapters correspond to the dimensions of the original lead-acid batteries. The connections are identical, so the battery can be replaced in a few minutes without further adjustments. Please note that only suitable for charging chargers may be used. We recommend JMP chargers. The maximum recommended charge currents please refer to the below specifications No way chargers may be used, trying to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they start the actual charge. The maximum charging voltage of 14.9 volts may be exceeded under any circumstances. Risk of explosion. The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius. technology JMT lithium-ion batteries as a cathode material using iron phosphate (LiFePO4), and use the lithium-polymer process in the manufacture. This allows them to rise even explode either in flames during normal operation. The technique and method of manufacture to ensure the highest safety standards for lithium batteries. - 12 V maintenance-free lithium-ion battery - recommended charging current 1.5 A - maximum charge current for fast charging 15 A Comparable in dimensions and connections with: Yuasa serial no YTX9-BS

Yuasa Wartungsfreie Motorrad-Batterie   - Wartungsfreie Hochleistungs-Starterbatterie in zuverlässiger Markenqualität - Auslaufsicher durch AGM-Technologie (Absorbed Glas Mat) - Auslaufsicheres Überdruckventil verhindert ein Entzünden des Elektrolyts bei Überdruck - Vibrationsfest - Bis zu 3x längere Lebensdauer gegenüber Standard-Batterien - Fortschrittliche Blei-Calcium Technologie erhöht die Startleistung - Sulfat-Stop schränkt die Plattensulfatierung deutlich ein - Wartungsfreie Batterien benötigen kein Nachfüllen von destilliertem Wasser - Durch erhitzen verbundenes Batteriegehäuse verhindert Leckagen und Korrosion - Die Batterie ist ab Werk mit Säure befüllt und geladen       Baugleich mit:     JM Herstellernummer YTX9-BS Varta Herstellernummer 50812LF GS Herstellernummer GTX9-BS FB Herstellernummer FTX9-BS Yuasa Herstellernummer YTR9-BS Exide Herstellernummer ETX-9-BS     Achtung !!!! Batterie ist nicht verwendbar für MV Agusta F4 Modelle.         060

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

JMP Skan Monitor 2 Battery monitoring with your smartphone   “Not suitable for lithium batteries.”   With the JMP Skan Monitor 2 and the new free Apple or Android app “JMP BatteryMonitor II”, you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed.   The positive charge status also prevents potential early damage or failure of the battery. Through continuous recording, the charge status of the battery is captured during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. A defective regulator can be quickly recognized.   Additionally, with the new app, starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.) can be accurately checked. This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved.   The transmitter is suitable for 12 V batteries.The range is approximately 10 meters.The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5)   The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs.   Please note: The new JMP Skan Monitor 2 requires the new app “JMP BatteryMonitor II”! If the minimum voltage is not met, a reminder to recharge the battery soon will be issued.- Easy attachment using eyelets to the battery- Power consumption only about 2 mA- No damage to the transmitter or battery occurs in case of reverse polarity- Free app available for download in the Apple App Store or Google Play Store under JMP Battery Monitor II- Voltage recording also during the ride. Results can be sent via email. File display in Excel is possible.                

Lithium-Ion Battery with Overcharge Protection from Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM and Ducati. The Power Sports Lithium-Ion batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved terminal connections. Overcharge Protection (OP) The Skyrich battery is equipped with an advanced battery management system (BMS), which, in addition to balancers (ensures even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage exceeding 14.9V.   Spacer (S) The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery compartment.    Waterproof (WP) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.  Indicator (I) All batteries are equipped with an improved state-of-charge indicator, which displays the battery's charge status even more accurately. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. The following advantages speak for Skyrich Lithium-Ion batteries: - integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- completely black battery casing- nylon battery casing, thus deformation due to heat is practically excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancers- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan  Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while Lithium-Ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments.  Please note that only suitable chargers may be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging.  The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.  TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries. - 12 V maintenance-free Lithium-Ion battery- Recommended charging current 1.5 A- Maximum charging current for fast charging 15 A   Equivalent to:   YT7B-BS YTX9-BS YT9B-BS YB9A-A YB9-B 12N9-4B-1 YTX7A-BS YTR9-BSTechnical Data:Voltage:   12v Capacity:   3 Ah (10 hrs)Energy Output:   36 WhType:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   180 ALength:   134 mmWidth:   65 mmHeight:   92 mmWeight Ready for Use:   0.8 kgAcid Pack Included:   No Connection Type:   Top    Front Positive Terminal:   Front Left Negative Terminal:   Front Right Gas Vent:   None Manufacturer:   Skyrich

JMT maintenance-free (MF) motorcycle battery gel - Maintenance-free JMT starter battery in proven and reliable brand quality.- The battery is already filled with a gel electrolyte and is therefore completely leak-proof.- Longer lifespan, increased cold start performance, and lower self-discharge compared to standard batteries.- Vibration resistant Equivalent to: JM Manufacturer number YTX9-BSVarta Manufacturer number 50812LFGS Manufacturer number GTX9-BSFB Manufacturer number FTX9-BSYuasa Manufacturer number YTR9-BSExide Manufacturer number ETX-9-BSTechnical Data:Voltage: 12v Capacity: 8 Ah (10 hrs)Energy output: 96 WhDesign: Gel Maintenance-free Activated: Yes Cold test current according to manufacturer: 135 AManufacturer's test standard: SAE Length: 151 mmWidth: 87 mmHeight: 105 mmWeight ready for use: 3.0 kgAcid pack included: No Connection type: from above from the front Positive terminal: front left Negative terminal: front right Gas outlet: None Manufacturer: JMT

Notice: No sales to private individualsThe battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148.We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5, paragraphs 1 and 3. JMT maintenance-free (MF) motorcycle battery - Maintenance-free starter battery in proven and reliable brand quality. - Up to 3x longer lifespan and increased cold start performance compared to standard batteries. - Leak-proof, as the included fleece completely binds the electrolyte. - Dry unfilled - Vibration resistant - No need to refill distilled water, making the battery completely maintenance-free.- An acid pack with the appropriate amount of acid for filling is included in the delivery Attention !!!! Battery is not suitable for MV Agusta F4 models. Equivalent to: YUASA manufacturer number YTX9-BS Varta manufacturer number 50812LF GS manufacturer number GTX9-BS FB manufacturer number FTX9-BS Technical Data:Voltage: 12v Capacity: 8 Ah (10 hrs)Energy output: 96 WhDesign: Maintenance-free Activated: No Cold cranking current according to manufacturer: 135 AManufacturer's test standard: SAE Cold cranking current in (SAE) measured with JJM 609.00.66: 275 ACold cranking current in (DIN) measured with JJM 609.00.66: 255 ACold cranking current in (EN) measured with JJM 609.00.66: 155 ALength: 150 mmWidth: 87 mmHeight: 106 mmWeight ready for use: 2.9 kgAcid pack included: Yes Acid volume: 0.47 LConnection type: from above from the front Positive terminal: front left Negative terminal: front right Gas outlet: None Manufacturer: JMT

Notice: No sales to private individualsThe battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148.We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5, paragraphs 1 and 3. Yuasa Maintenance-Free Motorcycle Battery - Maintenance-free high-performance starter battery in reliable brand quality - Leak-proof due to AGM technology (Absorbed Glass Mat) - Leak-proof pressure relief valve prevents ignition of the electrolyte under pressure - Vibration resistant - Up to 3x longer lifespan compared to standard batteries - Advanced lead-calcium technology increases starting power - Sulfate-stop significantly reduces plate sulfation - Maintenance-free batteries do not require topping up with distilled water - Heat-sealed battery case prevents leaks and corrosion - An acid pack with the appropriate amount of acid for filling is included in the delivery Compatible with: JM Manufacturer Number YTX9-BS Varta Manufacturer Number 50812LF GS Manufacturer Number GTX9-BS FB Manufacturer Number FTX9-BS Yuasa Manufacturer Number YTR9-BS Exide Manufacturer Number ETX-9-BS Warning !!!! Battery is not suitable for MV Agusta F4 models. 070923 07Technical Data:Voltage: 12v Capacity: 8 Ah (10 hrs)Energy Output: 96 WhDesign: Maintenance-free Activated: No Cold Cranking Amps (CCA) according to manufacturer: 120 AManufacturer's Test Standard: SAE Cold Cranking Amps (SAE) measured with JJM 609.00.66: 370 ACold Cranking Amps (DIN) measured with JJM 609.00.66: 340 ACold Cranking Amps (EN) measured with JJM 609.00.66: 205 ALength: 150 mmWidth: 87 mmHeight: 105 mmWeight (ready for use): 3.0 kgAcid Pack included: Yes Connection Type: Top Front Positive Terminal: Front left Negative Terminal: Front right Gas Vent: None Manufacturer: Yuasa