Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Vehicle-Specific Information:  Intake 4 pieces Exhaust 4 piecesValve Stem Seal Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket kits available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.

Aluring JMP - DIN 7603A- 20.0X24.0X1.5Technical Data:Range:   No Inner Diameter:   20 mmOuter Diameter:   24 mmHeight:   1.5 mmMaterial:   Aluminum Design:   Flat Fuel Resistant:   Yes Oil Resistant:   Yes

BMW R1200 GS R RS RT LS K50 Sliding Protection for Valve Cover Protection Plastic sliding protection for original BMW stainless steel valve cover protection 1 set = R + L Replacement for the original sliders.

JMP Connector Expansion Rivet compatible with the following vehicles: BMW E82, E88, E60, F07, E63, E64, X5, X6, Z4 for hole circle Ø min. (mm): 7.8for hole circle Ø max. (mm): 8.8 Material: Plastic Color: Black Contents: 10 Packaging unit: 1 Technical Data:Application: Car Vehicle Manufacturer: BMW Type: Expansion Rivets Drilling Diameter: 7.8 mmMaterial: Plastic compatible with: 8.0 mm hole

  Sheet Nut M6 JMP   - self-locking - Nut for sliding onto (sheet) edges - Provides a secure and quick connection of two or more parts - Easy assembly and disassembly - Tolerance compensation and blind assembly possible - High tightening torque - Nuts with threaded shaft are also suitable for demanding connections - Spring steel C45 - MKB SI GZ (metal-containing corrosion protection coating silver, sliding additive)     Dimensions: - Mounting thickness: 2.00 - 4.00 - A: 21.90 - B: 16.00 - C: 10.90 - 11.50 - S: 0.80  Technical Data:For screw diameter:   5.00 mmFor thread size:   No metric thread Length:   21.90 mmWidth:   16.00 mmShape:   open Self-locking:   No Surface:   Corrosion protection coating Material:   Steel

Easy to install + lightweight + high protectionWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick silver anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5132!

EBC CK The EBC CK standard clutch plates correspond to the original plates in dimensions and quantity. The friction material is made from a cork-based composition with a high aluminum content to minimize wear and fading. The highly compressed material also prevents the expansion of the plates and clutch slippage even under extreme load.

EBC Clutch Springs   10% harder than the original springs. Delivered as pre-packaged sets.

  Exhaust Valve   Original Spare PartTechnical Data:Head Diameter:   33.97 mmTotal Length:   84.78 mmStem Diameter:   5.40 mm

Intake Manifold Original Spare Part

  Magnetic Oil Drain Plug   Original Spare PartTechnical Data:Thread:   M20 x 1.5 Head:   Round head with internal hexagon Color:   Gray For Safety Wire:   No Seal/Washer:   No Magnetic:   Yes

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

Dresselhaus O-Rings Diameter: 24.0 mm Thickness: 3.0 mm Material: Perbunan, oil-resistant Packaging type: Blister pack Contents: 25 Technical Data:Range: No Inner diameter: 24 mmOuter diameter: 30 mmHeight: 3 mmMaterial: Rubber Design: round Gasoline resistant: Yes Oil resistant: Yes

O-Ring Set

Water pump cover gasket O-ring set Original spare part

The HP engine cover showcases the boxer engine attractively. The high-quality machined cover made of anodized aluminum clearly brings the boxer engine into focus and creates an exclusive customization effect. The premium machined part features HP branding and emphasizes the high-performance claim of the machine. High-quality machined part. Emphasizes sporty appearance. High customization effect.

The cylinder head cover protection is made of stainless steel and offers comprehensive protection against scratches and stone impacts. Plastic grinding protection on the outside, replaceable Large rubber buffer on the inside BMW Motorrad logo on the grinding protection Not compatible with engine protection bars or left/right engine protection bars Material: Stainless steel

Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick black anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5133!

for R1250GS/ R1250GS Adventure/ R1200GS/ R1200GS Adventure/ R1200RT/ RnineT/RnineT Scrambler/ RnineT Urban G/S /R1200R/HP2No more fear of stolen oil plugs or foreign "substances" in the oil circuit.No special tools required:Easy to use with a regular key. The key fits conveniently on any keychain.- elaborate workmanship- high-quality branded lock- available keyed alike with the installation locks for our aluminum cases

Brilliant and elegant - beautiful protection against foreign substances in the oil circuit of your R1250/R1200.Made of aluminum, CNC-machined, anodized, and with an integrated hexagon for opening.The plug is simply installed in place of the original plastic part and can then only be opened with a TORX50 key. This makes easy disassembly more difficult, yet quick maintenance remains no problem. (Torx bit is not included)