BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   100 Aspect Ratio:   90 % of widthConstruction:   - (Bias tire) Rim Diameter:   19 inchesLoad Index:   57 Speed Index:   V -240 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

All Balls Racing tapered roller bearing set for steering head / wheel bearing set   Note: Steering head bearing set only for GasGas, wheel bearing set only for BMW!   - includes all bearings and seals required for installation - high-quality OE replacement for ball bearings or direct replacement for tapered bearings - specially designed sealing lips that protect against dirt and water, while keeping the bearing grease clean  

n.v.

Seal Ring

Elring Aluminum Seal Ring DIN/ISO: 7603 Shape: A-Form Material: Aluminum Thickness/Strength [mm]: 1.5 mm Outer Diameter [mm]: 22 mm Inner Diameter [mm]: 18 mm Packaging unit 100 (Price per piece packaging unit = Minimum order quantity) used among others for oil drain plugs in vehicles: BMW (G30, F90, G11, G12, G05, G15, G06) BMW MOTORCYCLES Technical Data:Range: No Inner Diameter: 18 mmOuter Diameter: 22 mmHeight: 1.5 mmMaterial: Aluminum Design: A-Form Gasoline Resistant: Yes Oil Resistant: Yes

Vehicle-Specific Information:  2 pcs.  Cylinder base gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.    

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

Battery Rubber Holder

HATTECH STAINLESS STEEL - Header System polished with a 38mm header diameter for BMW /5, /6, R90S, /7 models up to 1984 HATTECH STAINLESS STEEL 38mm header compatible with mufflers with a 38mm connection no further modifications necessary Available in various surface finishes:              surface untreated / not shortened               brushed              polished              brushed & heat colors at the welds

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

Warning Blink Relay Bosch

Original BMW spare parts for mounting the windshield on the R60/S R90/S R100/S

BMW R850R R1100R R1150R R1100GS R850GS (steel tank)  Daypack Tankbag 3-5 liters of luggage bags suitcase ... small.Im from the new tank bag series from Hepco & Becker in the conventional magnetic tank variant daypack Unlike the other street tank bags you need in this tank bag not Tankring since the fixing of a classic magnet stattfindet.Material • 100% polyester (water-resistant coating) • comfort / features • map compartment with Velcro strips for telephone / Navibefestigung • rain cover and shoulder straps included • all-round zip for volume adjustment • carrying handle, luggage hook fastening • conventional magnetic hold tank - only for metallic tanks suitable size / volume volume: 3-5 ltr.Außenmaße BxTxH210 x 230 x 100mm (140 max)

BMW R90S R60/6 R75/6 R90/6 Battery Cover Right Primed R 60 75 80 /7 R 100 RS RT /7 CS S /T BMW Original Spare Part, New Part

Brake Caliper Repair Kit 40mm

10/49 Karbon-Keramik-Straßenbremsbelag   Identische organische Mischung wie der OE-Belag, um eine sichere, gleichbleibende Bremsleistung zu gewährleisten, die die Originalspezifikation des Herstellers widerspiegelt.

Bremslichtschalter

Holder for Carbon Brush  

Timing Chain Tensioner