Lithium-ion batteries JMT, high tech for your motorcycle. the latest generation of batteries identified by the red cover. Spacer (S) Battery is equipped with one or more spacers which are taped with adhesive tape under the battery so that the battery fits exactly into the battery box. Waterproof (W) The battery is fully waterproof and is not damaged when the motorcycle is washed with high pressure. Indicator (I) All batteries are equipped with a battery condition - equipped Indicator. Simply press the test button. Lights all three blue LEDs on the battery fully (ful) is loaded. Only light two LEDs, it is loaded only half (med). No later than when only one LED (low), the battery needs to be charged. With the replacement of a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort. Following advantages speak for JMT lithium-ion batteries: - about 1/3 of the weight of comparable lead acid battery - unbeatable ratio of cost / weight saving because they contain can be installed in any position, no acid - - does not contain heavy metals - balanced discharge / charge of all cells by Balancer - quick charge with a high charging current (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and high durability Lead-acid batteries can only use 30% of their capacity due to the specific properties, while in lithium-ion batteries almost 100% of the capacity can be used. For this reason, the lithium versions of JMT batteries for the same start power need only 1/3 of the capacity of a comparable lead-acid battery. A steady state of charge of all cells is also ensured by a built-in processor ( "balancer"). The dimensions of the lithium-ion batteries using adapters correspond to the dimensions of the original lead-acid batteries. The connections are identical, so the battery can be replaced in a few minutes without further adjustments. Please note that only suitable for charging chargers may be used. We recommend JMP chargers. The maximum recommended charge currents please refer to the below specifications No way chargers may be used, trying to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they start the actual charge. The maximum charging voltage of 14.9 volts may be exceeded under any circumstances. Risk of explosion. The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius. technology JMT lithium-ion batteries as a cathode material using iron phosphate (LiFePO4), and use the lithium-polymer process in the manufacture. This allows them to rise even explode either in flames during normal operation. The technique and method of manufacture to ensure the highest safety standards for lithium batteries. - 12 V maintenance-free lithium-ion battery - recommended charging current 1 A - maximum charging current for quick charge 12 A Comparable in dimensions and connections with: Yuasa serial no YTZ7S YTX7L-BS TTZ7S

NGK Spark Plug   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsports, from Formula 1 to motorcycle racing, make the NGK spark plug so successful. 08

BMW Original Repair Connector 3-Pole No. 611657 Item Description This offer includes 1 repair connector 3-pole. This offer applies to the red marked connector!!! ( Illustration No. 7 ) BMW Part Number: 83300413586 Fits various BMW motorcycles:

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

Lithium-Ion Battery with Overcharge Protection from Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM and Ducati. The Power Sports Lithium-Ion Batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved terminal connections. Overcharge Protection (OP) The Skyrich battery is equipped with an advanced battery management system (BMS), which, in addition to balancers (ensuring even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage exceeding 14.9V.   Spacer (S) The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery compartment.   Waterproof (WP) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.  Indicator (I) All batteries are equipped with an improved state-of-charge indicator, which displays the battery's charge status even more accurately. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. The following advantages speak for Skyrich Lithium-Ion batteries: - integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- completely black battery casing- nylon battery casing, thus deformation due to heat is practically excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancers- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan  Lead-acid batteries can only utilize 30% of their capacity due to their specific characteristics, while Lithium-Ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.  Please note that only suitable chargers should be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging.  The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.  TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free Lithium-Ion battery - Recommended charging current 1 A - Maximum charging current for fast charging 10 A   Equivalent to:   YB6,5L-B 12N7A-3A YB4L-A YB4L-B 12N5,5-3B 12N7D-3B YTZ5S 12N7-3B YTX7L-BS 12N7CZ-3D YTX5L-BS 12N4-3B YB5L-B YB7L-B YTZ7S 12N5-3B YTX4L-BS    Technical Data:Voltage:   12v Capacity:   2 Ah (10 hrs)Energy Output:   24 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to Manufacturer:   120 ALength:   107 mmWidth:   56 mmHeight:   85 mmWeight Ready for Use:   0.6 kgAcid Pack Included:   No Connection Type:   Top    Front Positive Terminal:   Front Right Negative Terminal:   Front Left Gas Venting:   None Manufacturer:   Skyrich

Notice: No sales to private individuals The battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148. We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the public is subject to restrictions according to Article 5 paragraphs 1 and 3. JMT maintenance-free (MF) motorcycle battery   - Maintenance-free starter battery in proven and reliable brand quality. - Up to 3x longer lifespan and increased cold start performance compared to standard batteries. - Leak-proof, as the included fleece completely binds the electrolyte. - Dry unfilled - Vibration resistant - No need to refill distilled water, making the battery completely maintenance-free.- TTZ series allows for any possible installation position except for mounting upside down due to its innovative design of the housing cover and the position of the safety valve.- An acid pack with the appropriate amount of acid for filling is included in the delivery Technical Data:Voltage:   12v Capacity:   6 Ah (10 hrs)Design:   Maintenance-free Activated:   No Cold cranking current according to manufacturer:   130 AManufacturer's test standard:   SAE Cold cranking current in (SAE) measured with JJM 609.00.66:   155 ACold cranking current in (DIN) measured with JJM 609.00.66:   140 ACold cranking current in (EN) measured with JJM 609.00.66:   85 ALength:   113 mmWidth:   70 mmHeight:   105 mmWeight ready for operation:   2.0 kgAcid pack included:   Yes Acid volume:   0.28 LConnection type:   from above    from the front Positive terminal:   front right Negative terminal:   front left Gas outlet:   None Manufacturer:   JMT

JMT maintenance-free (MF) motorcycle battery gel - Maintenance-free JMT starter battery in proven and reliable brand quality.- The battery is already filled with a gel electrolyte and is therefore completely leak-proof.- Longer lifespan, increased cold start performance, and lower self-discharge compared to standard batteries.- Vibration resistant Equivalent to: GS manufacturer number GTZ7STechnical Data:Voltage: 12v Capacity: 6 Ah (10 hrs)Design: Gel Maintenance-free Activated: Yes Cold cranking current according to manufacturer: 130 AManufacturer's test standard: SAE Cold cranking current measured in (SAE) with JJM 609.00.66: 80 ALength: 114 mmWidth: 71 mmHeight: 106 mmWeight ready for use: 2.0 kgAcid pack included: No Connection type: from above from the front Positive terminal: front right Negative terminal: front left Gas outlet: None Manufacturer: JMT

Yuasa Maintenance-Free Motorcycle Battery High-Performance - Maintenance-free high-performance starter battery in reliable brand quality- Leak-proof due to AGM technology (Absorbed Glass Mat)- Leak-proof pressure relief valve prevents ignition of the electrolyte under overpressure- Vibration-resistant- Up to 3x longer lifespan compared to standard batteries- Advanced lead-calcium technology increases starting power- Sulfate-stop significantly reduces plate sulfation- Maintenance-free batteries do not require topping up with distilled water- Heat-sealed battery housing prevents leaks and corrosion- The high-performance battery features up to 30% higher cold start performance due to a star-shaped grid design and additional plates- The battery is factory-filled and charged with acid Equivalent to: GS Manufacturer Number GTZ7STechnical Data:Voltage: 12v Capacity: 6 Ah (10 hrs)Energy Output: 72 WhDesign: Maintenance-free Activated: Yes Cold Cranking Amps (CCA) according to manufacturer: 130 AManufacturer's Test Standard: SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66: 130 ALength: 113 mmWidth: 70 mmHeight: 105 mmReady-to-use Weight: 2.1 kgAcid Pack Included: No Connection Type: Top Front Positive Terminal: Front right Negative Terminal: Front left Gas Venting: None Manufacturer: Yuasa

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).