To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

Adjustable Footpeg Lowering for BMW R1150Rincluding ABE With the new footpeg adapter, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for 40 mm lowering. It can be adjusted in increments of 4°. Generally, the basic adapter can be mounted upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position. The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, which leads to insufficient oxygen supply to the leg and the dreaded varicose veins can develop.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.If needed, you can order a brake lever or a shift lever cap for your BMW. The brake lever cap does not fit the GS models and the F800R.Please note that on newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the changed foot position, just like in a car.Please consider that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Adjustable Passenger Footpeg Lowering for BMW R1200R up to 2012including ABE With the new footpeg adapter for your BMW R1200R, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter brings the footpeg 60 mm closer, higher, or further away. In general, the base adapter can be mounted upwards or downwards.This allows you to achieve a natural ergonomics and a healthier sitting position. After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards. The passenger even gets the benefit of being able to adjust the peg upwards. Depending on the setting, the passenger achieves a healthy and comfortable leg position. MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters. When changing motorcycles, the kit can be easily transferred.As with all adjustable products, the footpeg adapter is characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".The advantage of these adapters is that the original footpeg is retained.Please note that lowering the footpeg also means less lean angle. But this adapter is adjustable. This way, you can easily find the optimal setting. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

The airchannel cover in carbon for the BMW R 90 T is a direct replacement for the original component.  Attention: The cover fits. without any necessary changes on the bike. from model 08/2015! It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

Sports Exhaust High-End in perfection: The high-quality slip-on exhaust made of titanium with a carbon end cap delivers a powerful sound and sporty appearance. Additionally, the sports exhaust developed with Akrapovič is optimized for weight compared to the stock exhaust. Powerful sound and sporty appearance Weight optimization High-quality high-end product Street legal (EU-ABE)

Offered here is a used part Vehicle: R1200C Manufacturer: BMW Condition: normal signs of use Description: sold as shown Part number: 12312306020

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: Top case carrier for combination with original BMW side case carrier / luggage bridge. (Plastic carrier)

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 7 721 223 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Original BMW Spare Part / Accessory Diameter 21 mm

The Belly pan in carbon for the BMW R NineT Serie is a direct replacement for the original component.it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

Quantum-Ersatzkraftstoffpumpen, -regler, -tankdichtungen, -kraftstofffilter und -siebe erfüllen oder übertreffen die OEM-Spezifikationen und verfügen über Verbesserungen, die das OEM-Design verbessern. Dient zur Reparur von 16142350641. Das Kit enthält eine neue Quantum Benzinpumpe. Einen neuen Kraftstoffdruckregler und einen neuen Mahle KL 145 Benzinfilter. Eine neue Benzinpumpendeckeldichtung für den Tank und diverse Siebe, Kraftstoffschläuche und Schraubschellen.Gerade nach langer Standzeit, wenn im Tank sich alles aufgelöst hat, kann man mit diesem Reparatursatz alle betroffenen Bauteile erstzen und kann sicher sein, dass der Kraftstoffdruck wieder in Ordnung ist.Verbesserte Polymere, Bürsten und Kommutatoren gewährleisten eine lange Lebensdauer und Haltbarkeit bei verschiedenen Kraftstoffmischungen.SPEZIFIKATIONEN: Stromaufnahme: 5,3 A bei 40 psi, 6,0 A bei 60 psi Förderleistung: 145 l/h bei 40 psi, 119 l/h bei 60 psi FUNKTIONEN & VORTEILE: OEM-Leistung oder besser Beschichtetes, korrosionsbeständiges Gehäuse minimiert Festfressen im Stillstand. Speziell für leisen Betrieb entwickelt. Einbaufertiger Ersatz Kraftstoffsieb mit Gradientendichte für hervorragende Schadstofffilterung Patentierte Rückschlagventiltechnologie Kompatibel mit modernen, ethanolhaltigen Benzinpumpen Dieses Teil passt für eine Vielzahl von Anwendungen, einschließlich BMW.

EBC HPSR Brake Disc, rigid design. MADE IN UK.The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc layer, which wears off in the brake pad contact zone during the break-in process. Only in this area can light surface rust form after prolonged periods of inactivity. The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear. - Brake ring machined from forged HPSR steel with low carbon content.- Therefore, no warping of the brake disc even under maximum load.- No glazing of the braking surface, thus the coefficient of friction remains constant.- Braking surface drilled with optimized hole pattern.- Galvanized for protection against corrosion.- Minimal manufacturing tolerances.- EBC recommends EBC Double-H sintered brake pads for best braking performance.- Independent design.Technical Data:Outer Diameter: 320 mmInner Diameter: 108.5 mmBolt Circle: 203.4 mmNumber of Holes: 5 Hole Diameter: 16.7x14 mmThickness: 4.5 mmDesign: rigid Manufacturer: EBC

Used part, normal signs of use, see additional pictures BMW part number: 61357689832 Fits according to part number for the following vehicles:

  EBC Brake Discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Zinc-coated for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design. Technical Data:Outer Diameter:   265 mmInner Diameter:   137.2 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   rigid Manufacturer:   EBC

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: not combinable with original side case holders!

Solid side carriers for mounting Hepco&Becker C-Bow side bags and cases High-quality surface finish Standard Hepco&Becker hard-shell cases, such as the Junior or Journey, do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the installation instructions, vehicle-specific notes, and motorcycle manufacturer specifications for any potential restrictions) Usually combinable without issues with top case carriers, sissy bars, or solo racks (please refer to the installation instructions or vehicle-specific notes for each carrier) Luggage bridge extensions may restrict bag mounting on the carrier Luggage carriers do not require ABE or registration in the documents Scope of delivery: left + right + installation instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals. Please ensure that the bags have sufficient distance from the exhaust and that the turn signals have an adequate radiation angle. The exhaust flow must not be directed at the bags.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, thus integrating harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upwards the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: not combinable with original side case holders!

Our Hepco&Becker Lamp Guard protects the headlight in many cases and also gives your bike the proper off-road look. customized to the design of the motorcycle effective protection no reflections or danger from self-glare easy installation on most existing mounting points solid construction made of German steel robust and high-quality coating in Germany without ABE / TÜV.

solid side carriers for mounting Hepco&Becker C-Bow side bags and cases high-quality surface finish standard Hepco&Becker hard-shell cases, such as the Junior or Journey, do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the installation instructions, vehicle-specific notes, and motorcycle manufacturer specifications for any potential restrictions) usually combinable without issues with top case carriers, sissy bars, or solo racks (please refer to the installation instructions or vehicle-specific notes for each carrier) Luggage bridge extensions may restrict bag mounting on the carrier Luggage carriers do not require ABE or registration in the documents Scope of delivery: left + right + installation instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals. Please ensure that the bags have sufficient distance from the exhaust and that the turn signals have an adequate radiation angle. The exhaust flow must not be directed at the bags.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: not combinable with original side case holders!