Rear axle & chain

Machined aluminum body, adjustable spring preload and rebound (30 clicks). The locking of the spring preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload. The locking of the preload is done via a set screw.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in spring preload. The locking of the spring preload is done using a set screw.   The adjustment tool is included in the delivery.            

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Oil pressure damper with steel housing, spring preload adjustable in 5 detent points.  Adjustment tool included in the delivery.  

Vehicle-Specific Information:  belowOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Oil pressure damper with steel housing, spring preload adjustable in 5 detent points.  Adjustment tool included in the delivery.  

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   510 mmDiameter 1:   26.5 mmSpring Rate 1:   4.5 N/mmSpring Rate 2:   6 N/mmAir Chamber Left:   120 mmAir Chamber Right:   120 mmRecommended Viscosity:   10W Manufacturer:   YSS

Fuel cap with key and sealing ring For easier operation, the key only requires a quarter turn to unlock and lock.The key remains in the cap when it is in the unlocked position.

Vehicle-Specific Information:  belowOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.

Vehicle-Specific Information: rightOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.Technical Data:Cable:   1386 mm

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Drive Shaft ScrewTechnical Data:Type: Threaded Screws Thread: M8 x 1.0 Diameter: 8 mmLength: 21 mmHead: External Torx Drive: External Torx Surface: Blackened Color: Black Manufacturer: Other Special Feature: With Washer For Safety Wire: No

Fahrzeugspezifische Information:  weichere Feder YSS Stoßdämpfer – TOP LINE Serie Mehr Fahrkomfort. Mehr Kontrolle. Mehr Qualität. Die YSS TOP LINE Serie bietet hochwertige Stoßdämpfer für alle, die ihr Fahrverhalten spürbar verbessern möchten – egal ob im Alltag, auf langen Touren oder im sportlichen Einsatz. Diese Serie steht für präzise Verarbeitung, moderne Technik und individuelle Einstellmöglichkeiten – ideal für anspruchsvolle Fahrerinnen und Fahrer sowie alle, die Wert auf Sicherheit, Komfort und Stil legen. Produkteigenschaften: • Hochwertige Gasdruck-Stoßdämpfer mit fein abstimmbarer Dämpfung • Robuste Aluminium-Bauweise, CNC-gefräst – leicht und langlebig • (Modellabhängig) mit externem Ausgleichsbehälter für konstante Performance • Fahrzeugspezifische Ausführung – einfacher Einbau ohne zusätzliche Anpassungen Einsatzbereiche: Für Roller, Motorräder und Custom Bikes – vom Stadtverkehr bis zur Kurvenfahrt am Wochenende. Die TOP LINE Stoßdämpfer holen das Beste aus deinem Fahrwerk heraus – spürbar stabiler, komfortabler und sicherer. Hinweis: • Die Federvorspannung ist stufenlos einstellbar (Arretierung über Gewindestift). • Zugstufenverstellung (30 Klicks) • Länge des Dämpfers ist um +-5mm verstellbar

NutTechnical Data:Type:   Hex Nuts For Thread Size:   M10 x 1.00 Self-locking:   No Wrench Size / SW:   17 mmMaterial:   Stainless Steel A2 Surface:   No Finishing Strength Class:   No Strength Class Color:   silver

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type: Progressive Length: 490 mmDiameter 1: 30 mmSpring Rate 1: 6 N/mmSpring Rate 2: 8.5 N/mmAir Chamber Left: 140 mmAir Chamber Right: 140 mmRecommended Viscosity: 10W Manufacturer: YSS

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Bellows Swingarm

Rounder disc structure and thus matched to the appearance of cruisers and choppers. Mounting kit must be ordered separately. Special mounting kit required for: - BMW R 1100 R - Suzuki GS 500 E - Suzuki SV650

  Drive Shaft Bolt Total Length: 20mm Thread Length: 12.5mmTechnical Data:Type:   Threaded Bolts Thread:   M8 x 1.0 Diameter:   8 mmLength:   12.5 mmHead:   External Torx Drive:   External Torx Surface:   Blackened Color:   Black Manufacturer:   Other Special Feature:   With Washer For Safety Wire:   No

Athena Dust Cap Gasket   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.