NEW!!! R Nine T Adjustable Clip-On Handlebars MultiClip Ø55/70 mm Clip-On Handlebars multiClip The clip-on handlebars that adapt to the rider * Individually adjustable clip-on handlebars that adapt to the rider * Tour version: Height adjustment approx. + 70 mm from the original handlebar position * Also suitable for fork diameters 41/43/45/48/50/53/55/58 mm * Laser scaling for symmetrical and correct adjustment in all positions * Maximum safety against twisting due to triple clamping on the fork * Handlebar tube bend of 5° for optimal fine adjustment * CNC machined from high-strength aluminum, black anodized

Aesthetically pleasing handlebar closer for the BMW RnineT Pure including brake and clutch adapterincluding ABEWe have also developed a handlebar adapter for the Pure, ensuring a significantly more relaxed riding experience.With our handlebar adapters, we bring the handlebar 50 mm closer and 50 mm higher, allowing you to achieve a relaxed seating position.This results in a natural ergonomics for a healthier seating position.The brake line is routed to the right side. To keep it in this position, it is loosely secured with a cable tie.For more R nineT models, see "Similar Items"For the R nineT Pure, the brake and clutch lines need to be routed, and one adapter must be screwed on each.The adapters are discreet and, in keeping with the original, are anodized in silver. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Weights with Clock for BMW R nineT, Scrambler, Urban, and Racer, PairTo see the clock while riding the BMW R nineT, you need to press a button until it appears on the display. We find this not to be safety-relevant given today's traffic flow.With the waterproof quartz clock integrated into the handlebar weight, you always have it directly in view.Additionally, the handlebar gains more weight at the end and becomes wider.The handlebar weights are available in silver and black anodized, as well as polished. The clocks are offered in silver and black.Please select your desired version when placing your order.The handlebar weights fit all R nineT models, including Pure, Scrambler, and Urban but also other motorcycles. They are secured with an M12 screw.Upon customer request, we can also manufacture them with an M6, M8, or M10 thread, so they will fit other BMWs and other motorcycles as well.Design protected.All items have been mounted and tested on original motorcycles - without any modifications.

Stubby Handlebar Kit multiClip TOUR Ready-to-install kit suitable for the selected vehicle model. The illustration shows the exemplary scope of delivery of a multiClip kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with tubular handlebars directly. The stubby can also be adjusted lower again if needed. Please order separately: Handlebar ends With parts certificate. In Germany, the kit must be approved and registered at a testing facility after installation. The KIT consists of: multiClip Tour Ø43 mm Upper fork bridge gpRacing black Small parts- up to approx. 5.5 cm higher / up to approx. 8 cm wider

The cover for the ignition lock is made of granite gray painted plastic, adding a colorful accent. This visually appealing alternative replaces the black stock part. Visual accent in granite gray. Replaces black stock cover.

The ergonomically optimized hand brake lever is machined from a high-strength aluminum alloy and anodized in black. The grip width can be adjusted in five steps using an adjustment screw to suit individual needs. The two-tone design of the hand brake lever is also coordinated with the custom parts of the Machined series. Grip width individually adjustable. Design coordinated with custom parts. Customization.

CNC-machined Handlebar Ends for Motorcycles Distinctively elegant finish with only 6.5 mm thickness Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 44g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles High-quality anodized in color The mounting screw elegantly disappears under the cover Available in various anodized colors / End cap is always black Permanently secure fit through aluminum expansion sleeves Ø12+18 mm Weight per pair: 120g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 140g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair - Black Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 360g Dimensions: see sketch