Adapter Cap for Gear LeverSimply slide the gear lever adapter over the existing gear lever. This extension allows for safer shifting and better accessibility. The gear lever is extended by 15 mm outward.By making a saw cut in the cap, it can be compressed in a vice and adjusted to the often reduced Ø of the gear lever rubber due to wear.Easy installation using clamping technology.We have revised the gear lever cap and equipped it with a black plastic cap. This has resulted in a smoother shifting process and protects the boot.For gear levers with a rubber pad Ø of 19 mm, we recommend our gear lever cap. It extends the gear lever by 15 mm outward, making it more accessible.All items have been mounted and tested on original motorcycles - without any modifications.

The airchannel cover in carbon for the BMW R 90 T is a direct replacement for the original component.  Attention: The cover fits. without any necessary changes on the bike. from model 08/2015! It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Link pipe made of titanium for the deeply mounted silencer of the exhaust system.BMW R nineT Scrambler - Installation note: The low-lying slip-on with link pipe can only be installed if the frame for the passenger seat is removed. Additionally, an extra aluminum bracket for the silencer from the BMW Accessories range (BMW part number 77 11 8 564 071) must be installed. Covers for the screw connections to the main frame (BMW part number 77 25 8 536 857) are also recommended to hide the unsightly holes.

Link pipe made of titanium for high-mounted muffler of the exhaust system.To install the link pipe L-B12SO9T, the passenger footrests must be removed.

Link pipe made of titanium for high-mounted silencer of the exhaust system.To install the link pipe L-B12SO11, the passenger footpegs must be removed.

With additional available headers made of the finest stainless steel, you can upgrade your Akrapovic Slip-On exhaust system to a full system. The link pipe required for the slip-on installation is necessary for mounting.Make your bike something special – with more power, beautiful design, and the unique Akrapovič sound.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

With additional available headers made of the finest titanium, you can upgrade your Akrapovic Slip-On exhaust system to a full system. The link pipe required for the slip-on installation is necessary for mounting.Make your bike something special – with more power, beautiful design, and the unique Akrapovič sound.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

With additional available headers made of the finest titanium, you can upgrade your Akrapovic Slip-On exhaust system to a full system. The link pipe required for the slip-on installation is necessary for mounting.Make your bike something special – with more power, beautiful design, and the unique Akrapovič sound.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with increased power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. We place great importance on design – resulting in a beautifully crafted exhaust system with a titanium muffler sleeve and numerous carbon components. Race-tested materials.Two different link pipes are available for the slip-on. You can choose between:High position: L-B12SO8T (for 2017-2020 model year) and L-B12SO10 (for 2021 model year)Low position: L-B12SO9T (for 2017-2020 model year) and L-B12SO11 (for 2021 model year)To install the link pipes L-B12SO9T and L-B12SO11, the passenger footpegs must be removed.

Titanium link pipe for deeply mounted silencer of the exhaust system.

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 7 721 223 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

BMW Original Repair Connector 3-Pole No. 611657 Item Description This offer includes 1 repair connector 3-pole. This offer applies to the red marked connector!!! ( Illustration No. 7 ) BMW Part Number: 83300413586 Fits various BMW motorcycles:

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

Original BMW Spare Part Part Number: 21217702595 According to the part number, it fits the following vehicles:

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles:

BMW R nineT Knee Pad Set Black Product Description Ergonomically shaped rubber pads on the right and left sides of the tank Stylish design element in heritage look Prevents scratching of the tank Self-adhesive, precise positioning with the help of a template Color: Black

Der sportliche Slip-on-Schalldämpfer aus Titan mit Carbon-Endkappe verleiht dem Scrambler ein besonders dynamisches Erscheinungsbild und einen kernigen Sound. Slip-on-Schalldämpfer für kernigen Sound und Gewichtsreduzierung in exklusivem Design Hoher Individualisierungseffekt mit eigenständiger Optik Langes Verbindungsrohr mit 2 Carbon-Hitzeschutzblenden Gewicht (inklusive Verbindungsrohr): 2,2 kg, Gewichtreduzierung gegenüber Serie ca. 2,6 kg Drehmoment und Leistung auf Serienniveau Akrapovič Schriftzug auf Seitenfläche gelasert Nur für Solobetrieb Optional: Abdeckung für Hauptrahmenverschraubung Schalldämpfer komplett aus Titan (Mantel, Verbindungsrohr und Innenaufbau); Endkappe aus Carbon Verbindungsrohr lang : sehr hoher Individualisierungseffekt mit eigenständiger Optik, inklusive 2 Carbon-Hitzeschutzblenden für Verbindungsrohr Inklusive Verbindungsrohr lang und Halteblech !   BMW Teilenummer : 77118564693 Passt laut Teilenummer an folgende Fahrzeuge : K21 R nineT ab 2016 K22 R nineT Pure ab 2016 K23 R nieT Scrambler ab 2016 K32 R nineT Racer ab 2016 K33 R nineT Urban G/S ab 2016

Cylinder Head Cover 2V-Style Right Unique appearance – the Cylinder Head Cover 2V-Style in retro design gives the boxer engine a distinctive look that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg Silver with a cast appearance made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design with a cast appearance. Color: Nürburg Silver. Delivery includes: One cylinder head cover including spark plug well cover and small parts.