Classic Line Gel battery without cover. Blitz battery 01214 black in nostalgic look, a must for every classic bike fan. Filled and charged with acid gel. Maintenance-free. 6V12Ah Technical Data:Voltage: 6v Capacity: 12 Ah (10 hrs)Energy output: 72 WhDesign: Gel Maintenance-free Activated: Yes Cold cranking amps according to manufacturer: 45 ALength: 120 mmWidth: 60 mmHeight: 130 mmWeight ready for use: 1.7 kgAcid pack included: No Connection type: from the side Positive terminal: front left Negative terminal: rear right Gas outlet: None Manufacturer: Blitz

Ignition Key

Ignition Key

Notice: No sales to private individuals The battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148. We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the public is subject to restrictions according to Article 5 paragraphs 1 and 3.JMT Motorcycle Battery Standard - Standard starter battery in proven and reliable brand quality.- high starting power and long lifespan- dry unfilled- this starter battery includes screws, vent hose, and acid pack in the appropriate quantity for initial filling.  Equivalent to: Yuasa Manufacturer Number 6N11A-1B Varta Manufacturer Number 01214Fiamm Manufacturer Number 3S4PGS Manufacturer Number 6N11A-1BTechnical Data:Voltage:   6v Capacity:   11 Ah (10 hrs)Energy Output:   66 WhDesign:   Standard Activated:   No Cold Cranking Amps (CCA) according to manufacturer:   88 AManufacturer's Test Standard:   SAE Cold Cranking Amps (CCA) measured in (SAE) with JJM 609.00.66:   410 ACold Cranking Amps (CCA) measured in (DIN) with JJM 609.00.66:   380 ACold Cranking Amps (CCA) measured in (EN) with JJM 609.00.66:   245 ALength:   122 mmWidth:   62 mmHeight:   132 mmWeight (ready for use):   1.74 kgAcid Pack included:   Yes Acid Volume:   0.42 LConnection Type:   from the front Positive Terminal:   front right Negative Terminal:   rear left Gas Vent:   right Manufacturer:   JMT

Yuasa Motorcycle Battery Standard - Standard starter battery in reliable brand quality - High starting power and long service life - Heat-sealed battery case prevents leaks and corrosion - Dry unfilled - An acid pack with the appropriate amount of acid for initial filling is available separately Technical Data:Voltage: 6v Capacity: 7 Ah (10 hrs)Energy Output: 42 WhDesign: Standard Activated: No Manufacturer's Test Standard: SAE Length: 126 mmWidth: 48 mmHeight: 126 mmReady-to-use Weight: 1.7 kgAcid Pack Included: No Acid Volume: 0.3 LConnection Type: from the front Positive Terminal: front right Negative Terminal: rear left Gas Venting: None Manufacturer: Yuasa

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.     Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape to ensure the battery fits exactly in the battery box.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED is lit (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of a comparable lead-acid battery - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     The maximum charging voltage of 7.2 +/- 0.2 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 6 V maintenance-free lithium-ion battery - Recommended charging current 1.5 A - Maximum charging current for fast charging 12 A     Comparable in dimensions and connections with: Yuasa part no. 6N11A-1B B38-6A 6YB8L-B 6N6-3B(-1) B39-6   Technical Data:Voltage:   6v Capacity:   2.40 Ah (10 hrs)Energy Output:   14 WhDesign:   Lithium    Maintenance-free Activated:   Yes Manufacturer's Test Standard:   JIS Cold Cranking Amps (SAE) measured with JJM 609.00.66:   410 ACold Cranking Amps (DIN) measured with JJM 609.00.66:   375 ACold Cranking Amps (EN) measured with JJM 609.00.66:   230 ALength:   107 mmWidth:   56 mmHeight:   85 mmWeight Ready for Use:   0.3 kgConnection Type:   from above    from the front Positive Terminal:   front right Negative Terminal:   front left Gas Vent:   None Manufacturer:   JMT

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).