Lithium-Ionen-Batterien von JMT, Hightech für Ihr Motorrad.   Batterien der neuesten Generation erkennbar am roten Gehäusedeckel. Mit dem Ersatz einer Standard Blei-Säure-Batterie durch eine JMT Lithium-Ionen-Batterie können bis zu 5 kg Gewicht gespart werden, ohne nennenswerten Aufwand.   Spacer (S) Batterie ist mit einem oder mehreren Distanzstücken ausgerüstet, die mit dem mitgelieferten Klebestreifen unter die Batterie geklebt werden, damit die Batterie exakt in den Batteriekasten passt.   Waterproof (W) Die Batterie ist komplett wasserdicht und nimmt keinen Schaden, wenn das Motorrad mit Hochdruck gereinigt wird.   Indicator (I) Alle Batterien sind mit einem Batteriezustand - Indikator ausgerüstet. Einfach auf den Test Button drücken. Leuchten alle 3 blauen LEDs auf, ist die Batterie voll (full) geladen. Leuchten nur 2 LEDs, ist sie nur noch halb (med) geladen. Spätestens wenn nur noch eine LED leuchtet (low), muss die Batterie geladen werden.   Folgende Vorteile sprechen für JMT Lithium-Ionen-Batterien: - ca. 1/3 des Gewichts der vergleichbaren Blei-Säure-Batterie - unschlagbares Verhältnis von Kosten/Gewichtsersparnis - Batteriegehäuse aus Nylon, daher ist eine Verformung bei Hitze praktisch ausgeschlossen - in jeder Position einbaubar, da keine Säure enthalten - enthält keine Schwermetalle - ausgewogene Entladung/Ladung aller Zellen durch Balancer - Schnellladung mit hohem Ladestrom möglich (bis zu 90% in 6 min) - sehr geringe Selbstentladung (max. 5% pro Monat) - auch bei hohen Temperaturen noch gute Leistung bis 60°C - sichere Technik und hohe Lebensdauer   Blei-Säure-Batterien können aufgrund der spezifischen Eigenschaften nur 30% ihrer Kapazität nutzen, während bei Lithium-Ionen-Batterien nahezu 100% der Kapazität nutzbar sind. Aus diesem Grund benötigen die Lithium-Versionen der JMT Batterien für die gleiche Startleistung nur 1/3 der Kapazität einer vergleichbaren Blei-Säure-Batterie. Ein gleichmäßiger Ladezustand aller Zellen ist zudem durch einen eingebauten Prozessor („Balancer“) sichergestellt. Die Maße der Lithium-Ionen-Batterien entsprechen mithilfe von Adaptern den Maßen der originalen Blei-Säure-Batterien. Auch die Anschlüsse sind identisch, weshalb die Batterie ohne weitere Anpassungen in wenigen Minuten ausgetauscht werden kann.   Bitte beachten Sie, dass zum Laden nur geeignete Ladegeräte verwendet werden dürfen. Wir empfehlen JMP-Ladegeräte. Die maximal empfohlenen Ladeströme entnehmen Sie bitte den untenstehenden technischen Daten Auf gar keinen Fall dürfen Ladegeräte verwendet werden, die versuchen, tiefentladene Batterien unter 10 Volt mit einer Spannung von mehr als 14,9 Volt zu desulfatieren, bevor sie mit der eigentlichen Ladung beginnen. Die maximale Ladespannung von 14,9 Volt darf in keinem Fall überschritten werden. Der Hersteller garantiert eine ausreichende Startkapazität bis zu -5 Grad Celsius.   Technik JMT Lithium-Ionen Batterien verwenden als Kathodenmaterial Eisenphosphat (LiFePO4) und verwenden das Lithium-Polymer Verfahren bei der Herstellung. Dadurch können sie im Normalbetrieb weder in Flammen aufgehen noch explodieren. Die Technik und das Herstellungsverfahren gewährleisten den höchsten Sicherheitsstandard bei Lithium Batterien. - 12 V wartungsfreie Lithium-Ionen-Batterie - Ladestrom empfohlen 1 A - maximaler Ladestrom für Schnellladung 10 A   Vergleichbar in Maßen und Anschlüssen mit: Yuasa Herst.-Nr YTZ5S YTX4L-BS YTX5L-BS TTZ5S

JMT Lithium-Ionen-Batterie für Harley Davidson   Hightech für alle V2 Twins von Harley   Mit dem Ersatz einer Standard Blei-Säure-Batterie durch eine JMT Lithium-Ionen-Batterie können bis zu 5 kg Gewicht gespart werden, ohne nennenswerten Aufwand.   Folgende Vorteile sprechen für JMT Lithium-Ionen-Batterien: - ca.1/3 des Gewichts der vergleichbaren Blei-Säure-Batterie - unschlagbares Verhältnis von Kosten/Gewichtsersparnis - in jeder Position einbaubar, da keine Säure enthalten - enthält keine Schwermetalle - ausgewogene Entladung/Ladung aller Zellen durch Balancer - Schnellladung mit hohem Ladestrom möglich (bis zu 90% in 6 min) - sehr geringe Selbstentladung (max. 5% pro Monat) - auch bei hohen Temperaturen noch gute Leistung bis 60°C - sichere Technik und hohe Lebensdauer - Spezielle schwarze, angeraute Oberfläche für optimalen „Look“ - sehr hohe Kaltstartpower - exzellente Vibrationsfestigkeit - höchstbelastbare Polanschlüsse sorgen für einen problemlosen Start und eine lange Lebensdauer - Auslieferung erfolgt mit einer Polabdeckung, ebenfalls in schwarz   Blei-Säure-Batterien können aufgrund der spezifischen Eigenschaften nur 30% ihrer Kapazität nutzen, während bei Lithium-Ionen-Batterien nahezu 100% der Kapazität nutzbar sind. Aus diesem Grund benötigen die Lithium-Versionen der JMT Batterien für die gleiche Startleistung nur 1/3 der Kapazität einer vergleichbaren Blei-Säure-Batterie. Ein gleichmäßiger Ladezustand aller Zellen ist zudem durch einen eingebauten Prozessor („Balancer“) sichergestellt.     Bitte beachten Sie, dass zum Laden nur geeignete Ladegeräte verwendet werden dürfen. Wir empfehlen JMP-Ladegeräte. Die maximal empfohlenen Ladeströme entnehmen Sie bitte den untenstehenden technischen Daten.   Auf gar keinen Fall dürfen Ladegeräte verwendet werden, die versuchen, tiefentladene Batterien unter 10 Volt mit einer Spannung von mehr als 14,9 Volt zu desulfatieren, bevor sie mit der eigentlichen Ladung beginnen. Die maximale Ladespannung von 14,9 Volt darf in keinem Fall überschritten werden.   Der Hersteller garantiert eine ausreichende Startkapazität bis zu -5 Grad Celsius.   Technik JMT Lithium-Ionen Batterien verwenden als Kathodenmaterial Eisenphosphat (LiFePO4) und verwenden das Lithium-Polymer Verfahren bei der Herstellung. Dadurch können sie im Normalbetrieb weder in Flammen aufgehen noch explodieren. Die Technik und das Herstellungsverfahren gewährleisten den höchsten Sicherheitsstandard bei Lithium Batterien.   - 12 V wartungsfreie Lithium-Ionen-Batterie - Ladestrom empfohlen 4 A - maximaler Ladestrom für Schnellladung 32 A

Lithium-Ion Batteries from JMT   Batteries of the latest generation identifiable by the red housing cover.   Included in the delivery Foam blocks 5 x 120 x 90 x 7 (mm) 1 x 120 x 90 20 (mm)    Sleep Mode Pressing the Power ON/OFF button for about 3 seconds causes a red blinking of the LED status indicator and the electrical separation of the battery terminals from the actual battery. Pressing again for 3 seconds causes a green blink and the battery can be used "normally" again. WARNING: If the battery is not loaded or charged for a few minutes, it will automatically turn off. Before the battery is needed again, it must be turned on again.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, which is why the battery can be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers should be used for charging, such as the JMP 800, JMP 4000, or the corresponding workshop devices. For fast charging, we recommend the JMP 30000 Pro workshop device. This can recharge a lithium-ion battery to 90% within just 6 minutes. The maximum recommended charging currents can be found in the technical data below.   Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.   - 12 V maintenance-free lithium-ion battery - Recommended charging current 3.5 A - maximum charging current for fast charging 28 A   Technical Data:Voltage:   12v Capacity:   3.5 Ah (10 hrs)Energy Output:   42 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   210 ATesting Standard of the Manufacturer:   SAE Cold Cranking Amps in (SAE) measured with JJM 609.00.66:   215 ACold Cranking Amps in (DIN) measured with JJM 609.00.66:   200 ACold Cranking Amps in (EN) measured with JJM 609.00.66:   120 ALength:   181 mmWidth:   77 mmHeight:   170 mmWeight Ready for Use:   0.8 kgAcid Pack Included:   No Connection Type:   from the front Positive Terminal:   front right Negative Terminal:   front left Gas Venting:   None Manufacturer:   JMT

Lithium-Ion Batteries from JMT   Batteries of the latest generation identifiable by the red housing cover.   Included in the delivery Foam blocks 5 x 120 x 90 x 7 (mm) 1 x 120 x 90 20 (mm)   Sleep mode Pressing the Power ON/OFF button for about 3 seconds causes a red blinking of the LED status indicator and the electrical separation of the battery terminals from the actual battery. Pressing again for 3 seconds causes a green blink and the battery can be used "normally" again.   Lithium-Ion Batteries from JMT   Batteries of the latest generation identifiable by the red housing cover.   Included in the delivery Foam blocks 5 x 120 x 90 x 7 (mm) 1 x 120 x 90 20 (mm)   Sleep mode Pressing the Power ON/OFF button for about 3 seconds causes a red blinking of the LED status indicator and the electrical separation of the battery terminals from the actual battery. Pressing again for 3 seconds causes a green blink and the battery can be used "normally" again.   Lithium-Ion Batteries from JMT   Batteries of the latest generation identifiable by the red housing cover.   Included in the delivery Foam blocks 5 x 120 x 90 x 7 (mm) 1 x 120 x 90 20 (mm)   Sleep mode Pressing the Power ON/OFF button for about 3 seconds causes a red blinking of the LED status indicator and the electrical separation of the battery terminals from the actual battery. Pressing again for 3 seconds causes a green blink and the battery can be used "normally" again.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, so that the battery fits exactly in the battery box.     Waterproof (W) The battery is completely waterproof and does not get damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   Quattro Pole (Q) The battery is equipped with four terminal connections. Depending on how the battery is installed, the positive terminal is arranged on the left or right, thus replacing many conventional lead-acid batteries in use.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of the comparable lead-acid battery - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, which is why the battery can be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers should be used for charging, such as the JMP 800, JMP 4000, or the corresponding workshop devices. For fast charging, we recommend the JMP 30000 Pro workshop device. This can recharge a lithium-ion battery to 90% within just 6 minutes. The maximum recommended charging currents can be found in the technical data below.   Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they start the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium-polymer process in manufacturing. As a result, they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.   - 12 V maintenance-free lithium-ion battery - Recommended charging current 3.5 A - Maximum charging current for fast charging 28 A   Comparable in dimensions and connections with: Yuasa manufacturer number U1-7 U1-9 U1R-7 U1R-9 12N24-3 12N24-3A 12N24-4       Technical Data:Voltage:   12v Capacity:   3.5 Ah (10 hrs)Energy Output:   42 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   210 AManufacturer's test standard:   SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66:   215 ACold Cranking Amps measured in (DIN) with JJM 609.00.66:   200 ACold Cranking Amps measured in (EN) with JJM 609.00.66:   120 ALength:   166 mmWidth:   123 mmHeight:   163 mmWeight ready for use:   0.8 kgAcid pack included:   No Connection type:   from the front Positive terminal:   back right    front right Negative terminal:   back left    front left Gas outlet:   None Manufacturer:   JMT

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring that the battery fits perfectly in the battery box.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED is lit (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free lithium-ion battery - Recommended charging current 1.0 A - Maximum charging current for fast charging 10 A   Equivalent to: HY85S

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Indicator (I) All batteries are equipped with a battery status indicator.     Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED is lit (low), the battery needs to be charged.   By replacing a standard lead-acid battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.     - 12 V maintenance-free lithium-ion battery - Recommended charging current 1.5 A - Maximum charging current for fast charging 15 A   Comparable in dimensions and connections with: Yamaha BR98  Technical Data:Voltage:   12v Capacity:   3.0 Ah (10 hrs)Energy Output:   36 WhType:   Lithium Activated:   Yes Cold Cranking Amps according to manufacturer:   180 ATesting Standard of Manufacturer:   SAE Length:   113 mmWidth:   69 mmHeight:   85 mmWeight Ready for Use:   0.7 kgAcid Pack Included:   No Connection Type:   from above    from the front Positive Terminal:   front left Negative Terminal:   front right Gas Vent:   None Manufacturer:   JMT

Ignition Capacitor

Ignition Key

Ignition Key

JMT Lithium-Ion Batteries, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits perfectly in the battery box.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED is lit (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT Lithium-Ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while Lithium-Ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT Lithium-Ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free Lithium-Ion battery - Recommended charging current 2.25 A - Maximum charging current for fast charging 22.5 A     Comparable in dimensions and connections with: Yuasa Part No. GTZ8V Yuasa Part No. YTZ8V HY110      

Matthies Classic Line Batteries in a nostalgic look, a must-have for every classic bike fan.   Top quality from European manufacturing. Handmade production. Housing made of black plastic. Black lid with fixation for the strap. Ventilation in the closure caps. Encapsulated open pole bridges. Protected against deep discharge. Vibration protected.   Delivered with lid and pre-charged without acid.            Technical Data:Voltage:   6v Capacity:   12 Ah (10 hrs)Design:   Standard Activated:   No Cold test current in (SAE) measured with JJM 609.00.66:   390 ACold test current in (DIN) measured with JJM 609.00.66:   370 ACold test current in (EN) measured with JJM 609.00.66:   225 ALength:   80 mmWidth:   85 mmHeight:   170 mmWeight ready for operation:   1.71 kgAcid pack included:   No Acid volume:   0.45 LConnection type:   from the front Positive terminal:   front left Negative terminal:   rear right Gas outlet:   None Manufacturer:   Blitz

Classic Line Gel battery with cover. Blitz battery 0811 black in nostalgic look, a must-have for every classic bike fan. Filled and charged with acid gel. Maintenance-free. 6V12Ah

Notice: No sales to private individuals The battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148. We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5, paragraphs 1 and 3. JMT Motorcycle Battery Standard   - Standard starter battery in proven and reliable brand quality. - high starting power and long service life - dry unfilled - this starter battery includes screws, vent hose, and acid pack in the appropriate quantity for initial filling.     Equivalent to:   Yuasa Manufacturer Number B49-6 Varta Manufacturer Number 00811 Fiamm Manufacturer Number 3R2PP    Technical Data:Voltage:   6v Capacity:   9 Ah (10 hrs)Design:   Standard Activated:   No Cold Cranking Amps (CCA) according to manufacturer:   80 AManufacturer's test standard:   SAE Cold Cranking Amps (CCA) measured in (SAE) with JJM 609.00.66:   295 ACold Cranking Amps (CCA) measured in (DIN) with JJM 609.00.66:   270 ACold Cranking Amps (CCA) measured in (EN) with JJM 609.00.66:   165 ALength:   91 mmWidth:   83 mmHeight:   160 mmWeight ready for use:   1.87 kgAcid pack included:   Yes Acid volume:   0.54 LConnection type:   from the front Positive terminal:   front left Negative terminal:   rear right Gas outlet:   None Manufacturer:   JMT

  Lithium-Ion Battery with Overcharge Protection from Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM and Ducati. The Power Sports Lithium-Ion batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved terminal connections. Overcharge Protection (OP) The Skyrich battery is equipped with an advanced battery management system (BMS), which, in addition to the balancers (ensuring even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage exceeding 14.9V.   Spacer (S) The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery compartment.  Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. The following advantages speak for Skyrich Lithium-Ion batteries: - integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- completely black battery casing- nylon battery casing, thus deformation due to heat is practically excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancers- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan  Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while Lithium-Ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.  Please note that only suitable chargers should be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.  TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free Lithium-Ion battery- Recommended charging current 1 A- Maximum charging current for fast charging 10 A   Equivalent to:   YTZ5S    Technical Data:Voltage:   12v Capacity:   2 Ah (10 hrs)Energy Output:   24 WhType:   Lithium Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   120 AManufacturer's Test Standard:   SAE Length:   107 mmWidth:   56 mmHeight:   85 mmWeight Ready for Use:   0.4 kgAcid Pack Included:   No Connection Type:   from above    from the front Positive Terminal:   front right Negative Terminal:   front left Gas Venting:   None Manufacturer:   Skyrich

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery box.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.     By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of a comparable lead-acid battery - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.    - 12 V maintenance-free lithium-ion battery - Recommended charging current 1.0 A - Maximum charging current for fast charging 8 A   Comparable in dimensions and connections with: Yuasa manufacturer number 12N5-4B 12N5.5-4A Technical Data:Voltage:   12v Capacity:   1.60 Ah (10 hrs)Energy Output:   19.20 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   96 AManufacturer's test standard:   SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66:   180 ACold Cranking Amps measured in (DIN) with JJM 609.00.66:   170 ACold Cranking Amps measured in (EN) with JJM 609.00.66:   100 ALength:   120 mmWidth:   60 mmHeight:   127    92 mmWeight ready for use:   0.4 kgConnection Type:   from above    from the front Positive Terminal:   front left Negative Terminal:   front right Gas Vent:   None Manufacturer:   JMT

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     The maximum charging voltage of 7.2 +/- 0.2 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 6 V maintenance-free lithium-ion battery - Recommended charging current 1.5 A - Maximum charging current for fast charging 12 A   Comparable in dimensions and connections with: Yuasa manufacturer number 6N11-2D B54-6 6N12A-2D 6YB11-2D    Technical Data:Voltage:   6v Capacity:   2.40 Ah (10 hrs)Energy Output:   14 WhDesign:   Lithium    Maintenance-free Activated:   Yes Manufacturer's Test Standard:   JIS Cold Cranking Amps (SAE) measured with JJM 609.00.66:   325 ACold Cranking Amps (DIN) measured with JJM 609.00.66:   305 ACold Cranking Amps (EN) measured with JJM 609.00.66:   185 ALength:   107 mmWidth:   56 mmHeight:   85 mmWeight Ready for Use:   0.3 kgConnection Type:   Top    Front Positive Terminal:   Front Left Negative Terminal:   Front Right Gas Venting:   None Manufacturer:   JMT

Lithium-Ion Battery with Overcharge Protection from Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM and Ducati. The Power Sports Lithium-Ion batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved terminal connections. Overcharge Protection (OP) The Skyrich battery is equipped with an advanced battery management system (BMS), which, in addition to balancers (ensuring even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage exceeding 14.9V.   Spacer (S) The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery compartment.    Waterproof (WP) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.  Indicator (I) All batteries are equipped with an improved state-of-charge indicator, which displays the battery's charge status even more accurately. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. The following advantages speak for Skyrich Lithium-Ion batteries: - integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- completely black battery casing- nylon battery casing, thus deformation due to heat is practically excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancers- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan  Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while Lithium-Ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.  Please note that only suitable chargers may be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging.  The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.  TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free Lithium-Ion battery- Recommended charging current 2.5 A- Maximum charging current for fast charging 22 A   Equivalent to:   YB18L-A YB16HL-A-CX YB18L-A2 SYB16L-B YB16L-B YB16CL-B YTX15L-BS YTX18L-BS YB16L-A2Technical Data:Voltage:   12v Capacity:   5 Ah (10 hrs)Energy Output:   60 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   300 ALength:   150 mmWidth:   87 mmHeight:   105 mmWeight Ready for Use:   1.3 kgConnection Type:   Top    Front Positive Terminal:   Front Right Negative Terminal:   Front Left Gas Venting:   None Manufacturer:   Skyrich

Lithium-Ion Battery with Overcharge Protection from Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM and Ducati. The Power Sports Lithium-Ion batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved terminal connections. Overcharge Protection (OP) The Skyrich battery is equipped with an advanced battery management system (BMS), which, in addition to balancers (ensuring even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage exceeding 14.9V.   Spacer (S) The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery compartment.    Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.  Indicator (I) All batteries are equipped with an improved state-of-charge indicator, which displays the battery's charge status even more accurately. Simply press the test button to check the battery's charge status. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. The following advantages speak for Skyrich Lithium-Ion batteries: - integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- completely black battery casing- nylon battery casing, thus deformation due to heat is practically excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancers- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan  Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while Lithium-Ion batteries can use nearly 100% of their capacity. For this reason, the Lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.  Please note that only suitable chargers should be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging.  The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.  TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free Lithium-Ion battery- Recommended charging current 4 A- Maximum charging current for fast charging 32 A   Equivalent to:   YIX30L YB30L-B 52515 Y60N24AL-B HVT-6 YIX30L-BS YB30CL-B 12N24-3A 12N24-3 53030 HVT-1 HVT-4   YIX30L YB30L-B 52515 Y60N24AL-B HVT-6 YIX30L-BS YB30CL-B 12N24-3A 12N24-3 53030 HVT-1 HVT-4Technical Data:Voltage:   12v Capacity:   8 Ah (10 hrs)Energy Output:   96 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   440 ALength:   165 mmWidth:   87 mmHeight:   130 mmWeight Ready for Use:   1.8 kgConnection Type:   Top    Front Positive Terminal:   Front Right Negative Terminal:   Front Left Gas Venting:   None Manufacturer:   Skyrich

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery box.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of a comparable lead-acid battery - unbeatable cost/weight savings ratio - can be installed in any position, as it contains no acid - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.   Please note that only suitable chargers should be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical specifications below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free lithium-ion battery - Recommended charging current 3.5 A - Maximum charging current for fast charging 28 A   Comparable in dimensions and connections with:Yuasa manufacturer numberYT12B-BSYT14B-BS

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery box.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.     - 12 V maintenance-free lithium-ion battery - Recommended charging current 3 A - Maximum charging current for fast charging 24 A   Comparable in dimensions and connections with: Yuasa Part No. YTX16-BS YTX20CH-BS YB16B-A YB16B-A1 HYB16A-AB YTX16-BS-1     Technical Data:Voltage:   12v Capacity:   6 Ah (10 hrs)Energy Output:   72 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   360 ATesting Standard of Manufacturer:   SAE Cold Cranking Amps (SAE) measured with JJM 609.00.66:   545 ACold Cranking Amps (DIN) measured with JJM 609.00.66:   510 ACold Cranking Amps (EN) measured with JJM 609.00.66:   300 ALength:   150 mmWidth:   87 mmHeight:   105    122    130    139    147    164 mmWeight Ready for Use:   1.2 kgAcid Pack Included:   No Connection Type:   Top    Front Positive Terminal:   Front Left Negative Terminal:   Front Right Gas Venting:   None Manufacturer:   JMT

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Spacer (S) The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery box.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved with minimal effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process guarantee the highest safety standards for lithium batteries.       - 12 V maintenance-free lithium-ion battery - Recommended charging current 1 A - Maximum charging current for fast charging 8 A     Comparable in dimensions and connections with: Yuasa Part No. YTX4L-BS YTX5L-BS Technical Data:Voltage:   12v Capacity:   1.60 Ah (10 hrs)Energy Output:   19.20 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   96 AManufacturer's Testing Standard:   SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66:   160 ACold Cranking Amps measured in (DIN) with JJM 609.00.66:   145 ACold Cranking Amps measured in (EN) with JJM 609.00.66:   90 ALength:   113 mmWidth:   69 mmHeight:   105    85 mmReady-to-use Weight:   0.4 kgConnection Type:   from above    from front Positive Terminal:   front right Negative Terminal:   front left Gas Venting:   None Manufacturer:   JMT

JMT Lithium-Ion Battery for Harley Davidson High-tech for all V2 Twins from Harley By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort. The following advantages speak for JMT lithium-ion batteries:- about 1/3 the weight of a comparable lead-acid battery- unbeatable cost/weight savings ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancer- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan- special black, textured surface for optimal "look"- very high cold start power- excellent vibration resistance- highly durable terminal connections ensure a trouble-free start and a long lifespan- delivery includes a terminal cover, also in black Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of the JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance.A uniform state of charge of all cells is also ensured by a built-in processor ("balancer").  Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging.The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances. The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius. TechnologyJMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process ensure the highest safety standards for lithium batteries.Technical Data:Voltage:   12v Capacity:   8.0 Ah (10 hrs)Energy Output:   96 WhType:   Lithium Activated:   Yes Cold Cranking Amps (Manufacturer):   400 ACold Cranking Amps (SAE) measured with JJM 609.00.66:   490 ACold Cranking Amps (DIN) measured with JJM 609.00.66:   445 ACold Cranking Amps (EN) measured with JJM 609.00.66:   275 ALength:   148 mmWidth:   86 mmHeight:   144 mmWeight (ready to use):   1.2 kgAcid Pack Included:   No Connection Type:   from the front Positive Terminal:   front right Negative Terminal:   front left Gas Venting:   None Manufacturer:   JMT

 High-tech for all V2 Twins from Harley By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort. The following advantages speak for JMT lithium-ion batteries:- about 1/3 the weight of a comparable lead-acid battery- unbeatable cost/weight savings ratio- can be installed in any position, as no acid is contained- contains no heavy metals- balanced discharge/charge of all cells through balancer- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan- special black, textured surface for optimal "look"- very high cold start power- excellent vibration resistance- highly durable terminal connections ensure a trouble-free start and a long lifespan- delivery includes a terminal cover, also in black Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance.A uniform state of charge of all cells is also ensured by a built-in processor ("balancer").  Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they start the actual charging.The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.  The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius. TechnologyJMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process ensure the highest safety standards for lithium batteries.Technical Data:Voltage:   12v Capacity:   8.0 Ah (10 hrs)Energy Output:   96 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps (Manufacturer):   400 ACold Cranking Amps (SAE) measured with JJM 609.00.66:   500 ACold Cranking Amps (DIN) measured with JJM 609.00.66:   460 ACold Cranking Amps (EN) measured with JJM 609.00.66:   280 ALength:   148 mmWidth:   86 mmHeight:   144 mmWeight (ready to use):   1.4 kgAcid Pack Included:   No Connection Type:   from the front Positive Terminal:   front left Negative Terminal:   front right Gas Venting:   None Manufacturer:   JMT

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).