Yuasa Maintenance-free motorcycle battery - Maintenance-free starter battery in a reliable Markenqualität- Leakproof by AGM technology (Absorbed Glass Mat) - Leak-proof pressure relief valve prevents an ignition of the electrolyte at overpressure Vibrationsfest- up to 3 times longer life compared to standard Batteries- advanced lead-calcium technology increases Startleistung- sulphate-stop limits the Plattensulfatierung clearly need one maintenance-free batteries, no topping up with distilled water by heating connected battery casing leaks and corrosion- preventing an acid pack with an appropriate amount of acid for filling is included Same as: Yuasa Manufacturer number 51913Varta MPN 51913Exide manufacturer number 519901 gel G19JMT manufacturer number 51913-21 GelJMT manufacturer number HJ51913-FP-I lithium Ion

Lithium-ion batteries from JMT, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Indicator (I) All batteries are equipped with a battery status indicator.     Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   By replacing a standard lead-acid battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, which means the battery can be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.     - 12 V maintenance-free lithium-ion battery - Recommended charging current 4 A - Maximum charging current for fast charging 28 A   Comparable in dimensions and connections with: Yuasa manufacturer number 51814 51913 52015 YT19BL HG-18-12   Technical Data:Voltage:   12v Capacity:   7.17 Ah (10 hrs)Energy Output:   90 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   450 AManufacturer's test standard:   SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66:   540 ACold Cranking Amps measured in (DIN) with JJM 609.00.66:   495 ACold Cranking Amps measured in (EN) with JJM 609.00.66:   300 ALength:   181 mmWidth:   77 mmHeight:   170 mmWeight ready for use:   1.4 kgAcid pack included:   No Connection type:   from the side Positive terminal:   front right Negative terminal:   front left Gas outlet:   None Manufacturer:   JMT

Champion Spark Plugs   Champion spark plugs were developed under extreme racing conditions. Experience shows that their use contributes to the development of new and better products that support the motorcyclist in everyday life.   Champion's OE aftermarket plugs are available for a variety of motorcycles and are characterized by their strength and vibration resistance.

Notice: No sales to private individualsThe battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148.We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5, paragraphs 1 and 3. JMT Motorcycle Battery High Power - High power starter battery in proven and reliable brand quality. - Increased cold start performance compared to standard batteries - dry unfilled - this starter battery includes screws, vent hose, and acid pack in the appropriate quantity for initial filling. Equivalent to: JM Manufacturer Number 12N19AH Varta Manufacturer Number 51814 Fiamm Manufacturer Number 6H4P Technical Data:Voltage: 12v Capacity: 19 Ah (10 hrs)Design: Standard Activated: No Cold cranking current according to manufacturer: 210 AManufacturer's test standard: SAE Cold cranking current measured in (SAE) with JJM 609.00.66: 335 ACold cranking current measured in (DIN) with JJM 609.00.66: 310 ACold cranking current measured in (EN) with JJM 609.00.66: 190 ALength: 185 mmWidth: 82 mmHeight: 170 mmWeight ready for operation: 5.99 kgAcid pack included: Yes Acid volume: 1.08 LConnection type: from the side Positive terminal: front right Negative terminal: front left Gas outlet: right Manufacturer: JMT

Yuasa Yumicron Motorcycle Battery - High power starter battery in reliable brand quality- High-performance fiberglass mats protect against vibration damage- Thin special separators in additional plates provide up to 30% higher cold start performance- Continuous cell connectors minimize internal resistance and increase performance- Sulfate stop significantly limits plate sulfation- Heat-sealed battery case prevents leaks and corrosion- Dry unfilled- An acid pack with the appropriate amount of acid for initial filling is available separately Equivalent to: JM Manufacturer Number 12N19AHVarta Manufacturer Number 51913Technical Data:Voltage: 12v Capacity: 17.7 Ah (10 hrs)Energy Performance: 212.4 WhDesign: Standard Activated: No Cold Cranking Amps (Manufacturer): 100 AManufacturer Test Standard: DIN Cold Cranking Amps (SAE) measured with JJM 609.00.66: 290 ACold Cranking Amps (DIN) measured with JJM 609.00.66: 260 ACold Cranking Amps (EN) measured with JJM 609.00.66: 160 ALength: 186 mmWidth: 82 mmHeight: 171 mmWeight (ready for use): 5.6 kgAcid Pack included: No Acid Volume: 1 LConnection Type: Side Positive Terminal: Front right Negative Terminal: Front left Gas Vent: Left Manufacturer: Yuasa

JMT maintenance-free (MF) motorcycle battery gel - Maintenance-free JMT starter battery in proven and reliable brand quality. - The battery is already filled with a gel electrolyte and is therefore completely leak-proof. - Longer lifespan, increased cold start performance, and lower self-discharge compared to standard batteries. - Vibration resistant Equivalent to: Yuasa manufacturer number 51913 Varta manufacturer number 51913 Exide manufacturer number 519901 Gel G19 Technical Data:Voltage: 12v Capacity: 22 Ah (10 hrs)Energy output: 264 WhDesign: Gel Maintenance-free Activated: Yes Cold cranking current according to manufacturer: 300 AManufacturer's test standard: SAE Cold cranking current measured in (SAE) with JJM 609.00.66: 300 ALength: 183 mmWidth: 79 mmHeight: 171 mmWeight ready for use: 6.0 kgAcid pack included: No Connection type: from the side Positive terminal: front right Negative terminal: front left Gas outlet: None Manufacturer: JMT

Notice: No sales to private individuals The battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148. We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5 Paragraphs 1 and 3.JMT Motorcycle Battery High Power - High power starter battery in proven and reliable brand quality.- Increased cold start performance compared to standard batteries- Dry unfilled- This starter battery includes screws, vent hose, and acid pack in the appropriate quantity for initial filling. Technical Data:Voltage:   12v Capacity:   25 Ah (10 hrs)Energy Output:   300 WhDesign:   Standard Activated:   No Cold Cranking Amps (CCA) according to manufacturer:   220 ATesting Standard of the Manufacturer:   SAE Cold Cranking Amps (CCA) measured in (SAE) with JJM 609.00.66:   380 ACold Cranking Amps (CCA) measured in (DIN) with JJM 609.00.66:   350 ACold Cranking Amps (CCA) measured in (EN) with JJM 609.00.66:   210 ALength:   183 mmWidth:   128 mmHeight:   170 mmWeight ready for use:   7.6 kgAcid pack included:   Yes Acid volume:   1.77 LConnection type:   from the side Positive terminal:   front right Negative terminal:   front left Gas outlet:   right Manufacturer:   JMT

Yuasa Maintenance-Free Motorcycle Battery   - Maintenance-free high-performance starter battery in reliable brand quality - Leak-proof due to AGM technology (Absorbed Glass Mat) - Leak-proof pressure relief valve prevents ignition of the electrolyte under pressure - Vibration resistant - Up to 3x longer lifespan compared to standard batteries - Advanced lead-calcium technology increases starting performance - Sulfate-stop significantly reduces plate sulfation - Maintenance-free batteries do not require topping up with distilled water - Heat-sealed battery case prevents leaks and corrosion - The battery is factory-filled with acid and charged       Identical to:   JM Manufacturer Number YTX5L-BS Varta Manufacturer Number 50412LF GS Manufacturer Number GTX5L-BS FB Manufacturer Number FTX5L-BS Exide Manufacturer Number ETX-5L-BS       Identical to:   Yuasa Manufacturer Number 51913 Varta Manufacturer Number 51913 Exide Manufacturer Number 519901 Gel G19 JMT Manufacturer Number 51913-21 Gel JMT Manufacturer Number HJ51913-FP-I Lithium Ion    Technical Data:Voltage:   12v Capacity:   17.7 Ah (10 hrs)Design:   Maintenance-free Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   170 AManufacturer's test standard:   SAE Cold Cranking Amps (CCA) measured in (SAE) with JJM 609.00.66:   195 ACold Cranking Amps (CCA) measured in (DIN) with JJM 609.00.66:   185 ACold Cranking Amps (CCA) measured in (EN) with JJM 609.00.66:   110 ALength:   185 mmWidth:   81 mmHeight:   170 mmWeight (ready for use):   5.4 kgAcid pack included:   No Acid volume:   0.95 LConnection type:   Side Positive terminal:   Front right Negative terminal:   Front left Gas outlet:   None Manufacturer:   Yuasa

This is a used part being offered Vehicle: K100 / K75 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, parts donor!!! Part number: 65752315540