Tank & Tank Accessories

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the respective original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals prescribed by the motorcycle manufacturers.    

Mahle Fuel FilterTechnical Data:Material:   Metal Connection Size:   8 mm Replaceable Insert:   No

Closure Screw JMP   - M18X1.5X12- DIN 908- Zinc-platedTechnical Data:Type:   Oil Drain Screws    Closure Screws Thread:   M18 x 1.5 Diameter:   18 mmLength:   12 mmHead:   Flat Head Drive:   Internal Hexagon Surface:   Electro-galvanized Material:   Steel Color:   Silver DIN:   908 O-ring/Washers:   None Manufacturer:   JMP Bolt For Safety Wire:   No Technical Data:Thread:   M18 x 1.5 Length:   12 mmHead:   Round Head with Internal Hexagon Material:   Steel Color:   Gray For Safety Wire:   No O-ring/Washers:   No Magnetic:   No

Fuel Filter Screen

Fuel Pump Repair Kit for BMW K1 K75 K100 K1100 DIRECT-FIT Fuel Pump for BMW K Models 1988-2005Quick and easy DROP-IN INSTALLATION: Replace all worn components to restore OE performance. Often, the rubber parts, such as the vibration damper, are also heavily worn. Rubber residues can be found in the fuel lines. Sometimes the fuel filter is even damaged. All these potential sources of error can be eliminated with this kit. Delivery directly from Germany. No additional import taxes or duties for EU customers!FEEL THE PERFORMANCE DIFFERENCE! DESIGNED TO IMPROVE PERFORMANCE AND ENSURE LONGEVITY. Developed and constructed for trouble-free operation of over 2,500 hours or 100,000 miles. Enhanced polymers, brushes, and commutators ensure a steady flow, power intake, and quiet operation.The ideal replacement for BMW part number: 16121461576 Fits according to BMW ETK in the following vehicles: K589 (K1, K 100 RS)   (08/1988 — 09/1993) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K100, RS, RT, LT)   (05/1982 — 10/1991) K569 (K 75, K 75 C, K 75 S, K 75 RT)   (12/1984 — 06/2005)

  Haltering für Kraftstoffpumpe mit 52mm Durchmesser  

Magnetic Oil Drain Plug with Seal Ring   Magnetic oil drain plugs collect metallic wear particles on the magnet and thus protect the engine from excessive wear! Technical Data:Thread:   M18 x 1.5 Length:   20.6 mmHead:   Hexagon Head Wrench Size:   17 mm Material:   Steel Color:   Gold For Safety Wire:   No Seal Ring/Washers:   Yes Magnetic:   Yes

The installation kits for the quantum fuel pump are designed to meet or exceed OEM specifications, and feature upgrades that enhance the OEM design. The vibration damper replaces the BMW part number: 16121464628. It is designed for a pump diameter of 52 mm. (The part number of the BMW fuel pump is 16121461576 - not included in the offer) The fuel filter / pre-filter replaces the BMW part number: 16121455126

  O-Ring Fuel Pressure RegulatorTechnical Data:Range:   No Inner Diameter:   5 mmOuter Diameter:   8 mmHeight:   1.5 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

The Stahlbus® oil drain valve is simply replaced with the existing oil drain screw.When changing the oil, unscrew the protective cap and attach the hose connector using the quick-release mechanism.Only when it is locked in place does the valve open, allowing the oil to drain into the provided container.When disconnecting the hose connector, the valve automatically closes, and you only need to screw the protective cap back on. Advantages at a glance: • No contact with oil • Easy handling with quick-release mechanism • Drain screw cannot be lost • No risk of burns from hot oil • No need to change seals • Oil pan thread is preserved • Double leak protection (protective cap and valve) • Connection to suction device possible • Controlled draining for sample collection or in case of overfilling • Protective cap secured against loss with O-ring • Oil change without tools Changing oil has never been this fun! Scope of delivery: - Valve body, CNC precision turned part made of high-quality steel - Copper seal - Hose connector, CNC precision turned part made of high-quality steel - High-quality hose 40cm long - Protective cap made of anodized aluminum - Illustrated operating instructions Technical Data:Thread: M18 x 1.5 Length: 20.6 mmHead: Hexagon head Wrench size: 19 mm Material: Steel Color: silver For safety wire: No Seal/washer: Yes Magnetic: No

Mahle oil filter cartridge - For all K models with three seals and an o-ring for the oil pan cover As one of the world's leading filter manufacturers and OEMs for BMW motorcycles is Mahle has always stood for quality and technology. Oil filter Mahle keep dirt reliably from the lubrication circuit away to thereby obtain both the oil quality and the performance and efficiency of the engine. Mahle oil filter cartridges equipped made of sheet steel, deep-drawn and powder-coated housing for faster release of the filter with a polygon. Benefits of Mahle oil filters: - where cold start resistance by a stable pleat geometry - reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connectors - peak loads up to 20 bar are compensated by the high compressive strength of the housing - oil supply ensured by pressure relief valve at any time (for viscous oil, as it is placed in cold start phases or at low outside temperatures, as well as in a heavily contaminated by exceeding the change interval filter element) - return valve the emptying of the filter prevented when the engine and ensures at engine start rapid supply of oil

BMC Tauschluftfilter   Das erworbene Know-how auf den Rennstrecken wird direkt in die Produktion der Serienfilter eingebracht, um dem anspruchsvollen Motorradfahrer ein Produkt zu bieten, das erprobt ist, Leistung bringt und sich in einer ständigen Evolution befindet.   Die verwendeten Materialien sind die besten, die momentan auf dem Markt verfügbar sind. Die Filter werden aus einem einzigen Gummirahmen hergestellt, um eventuelle Brüche zu verhindern. Das filtrierende Element ist aus einem speziellen Baumwollgewebe (4 Lagen), getränkt in einem Öl mit geringer Klebrigkeit.   Es wird umfasst von einem Aluminiumnetz, das mit einer Epoxidlösung behandelt ist, um gegen die Benzindämpfe und der Oxidation resistent zu sein. Zudem hat die Baumwolle den Vorteil auswaschbar und wieder verwendbar zu sein.   Durch diese Merkmale garantieren die BMC-Sportluftfilter (Tauschluftfilter) einen höheren Luftdurchsatz gegenüber den original verwendeten Papier-Filtern, einen minimalen Druckverlust der eintretenden Luft und führen somit zu einer besseren Leistung des Motors.   - Haltbarkeit: waschbar und wieder verwendbar, kein Ersatz nötig - Breitere Filteroberfläche - Maximale Luftdurchlässigkeit (4 Lagen Baumwolle) - Höhere Absorption und Filterung - Besseres Druckabfall-Verhältnis - Geprüft durch internationale Testverfahren

The original K & N air filter. The K & N air filters are easily replace the standard air filter. It required no changes to the system. The standard setting the carburetor does not need to be changed. results from using K & N air filters no loss of power, on the contrary, because the potential of the air box is optimized. undAbgasvorschriften noise are complied with. K & N filter have the same life span as the motors and allow substantial savings in filter purchase. The unique filter system can extend the life of the motors undschützt optimally against dangerous dust, sand, etc. K & N filters are fully washable permanent filter with little maintenance recovery and can be used again without any loss of filter efficiency and air flow. - High airflow with excellent filtration - Developed to increase horsepower and acceleration - washable and reusable - Economical; K & N filter holds over the entire life of the Motors products maintenance interval; up to 80,000 km, before cleaning is required depending on road use - Compatible with OEM Vehicle Electronics - Environmentally friendly