BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to resist gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

This is a new part being offered Vehicle: R1150GS + Adventure Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 13711341405

Mahle oil filter cartridge - For all R-models with 3 sealing rings As one of the world's leading filter manufacturers and OEMs for BMW motorcycles is Mahle has always stood for quality and technology. Oil filter Mahle keep dirt reliably from the lubrication circuit away to thereby obtain both the oil quality and the performance and efficiency of the engine. Mahle oil filter cartridges equipped made of sheet steel, deep-drawn and powder-coated housing for faster release of the filter with a polygon. Benefits of Mahle oil filters: - where cold start resistance by a stable pleat geometry - reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connectors - peak loads up to 20 bar are compensated by the high compressive strength of the housing - oil supply ensured by pressure relief valve at any time (for viscous oil, as it is placed in cold start phases or at low outside temperatures, as well as in a heavily contaminated by exceeding the change interval filter element) - return valve the emptying of the filter prevented when the engine and ensures at engine start rapid supply of oil

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1100GS Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen Teilenummer: 16112324876

The HEPCO&BECKER tank protection bars perfectly follow the lines of the machine and give the motorcycle an individual character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model.

The HEPCO&BECKER tank protection bars perfectly follow the lines of the machine and give the motorcycle an individual character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are absorbed as best as possible by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model.