Tank & Tank Accessories

Installation Note: The upper crash bar set does not fit the BMW R 1250 GS Adventure model.The product, made from sandblasted, lightweight titanium, is the first of its kind in the Akrapovič range and fully utilizes the company's expertise in titanium technology. It has been developed from the ground up and offers a weight saving of around 40% compared to comparable versions made of steel, as well as high strength and corrosion resistance.The pipes are precisely WIG-welded and equipped with laser-cut and finely machined 8-mm flanges to ensure a perfect fit and strength. They fit perfectly with the existing components of the bike and provide the option to attach additional bags, fog lights, or auxiliary headlights to the bars.The product weighs only 2.38 kg. The highly stable construction, extensively evaluated through numerous tests and deformation analyses, is partially connected to the frame to distribute any impacts over the pipes. The bars feature an engraved logo as well as the clearly visible inscription Titanium to highlight the important product characteristic.

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to be resistant to gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

BMW Original Spare Part Air Filter Insert Top Brand Quality

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals prescribed by the motorcycle manufacturers.

The HEPCO&BECKER Tank Protection Bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front end high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials engine protection bars do not need to be registered and do not require ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

Oberer SturzbügelDie oberen Sturzbügel werden aus schwarz pulverbeschichtetem Stahl konstruiert und werden als Ergänzung des Sturzbügels von SW-MOTECH montiert.Die exklusiv für dieses Motorrad entwickelten Elemente passen sich nahtlos in die Optik des Fahrzeuges ein und garantieren eine einfache Montage. Die oberen Sturzbügel schützen vornehmlich die Verkleidung des Motorrads und verleihen dem Motorrad einen individuellen Look.Konstruktion aus robustem Stahl mit 22 mm RohrdurchmesserWitterungs- und korrosionsbeständige Pulverbeschichtung in SchwarzSchützt die VerkleidungModellspezifische Entwicklung garantiert präzise PassgenauigkeitEinfache Montage durch Verschrauben an original AnbaupunktenLieferumfang2 x Oberer SturzbügelMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 4,4 kgHinweisDer untere Sturzbügel ist nicht im Lieferumfang enthalten.Für Montage erforderlichDie Montage ist nur mit dem SW-MOTECH Sturzbügel oder dem original BMW Sturzbügel möglichNicht kompatibel mitDie oberen Sturzbügel sind nicht mit den BMW LED-Zusatzscheinwerfern kompatibel, da Sturzbügel und Scheinwerfer an den gleichen Anbaupunkten montiert werdenGenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

During many of our trips to dusty and dry countries, as well as during most sports and rally events, we faced the issue of fine dust repeatedly entering the intake tract through the air filters. This sometimes had significant consequences for the engine. Over the past few years, we have tried and tested many air filters. We found the solution to our dust problem in Australia. Unifilter Australia provided us with air filters for testing that met our expectations 100%. The Touratech Research & Development Team has used the Unifilter in all racing events and has since found no dust residue in the air filter box or engine. Another advantage of the filters made from "High-Tech Foam" is their long lifespan. The filter is not discarded when it gets dirty; instead, it is washed and re-oiled, allowing it to be reused repeatedly.Made in AustraliaThis way, you not only protect your engine but also your wallet. Scope of delivery:2x Snorkel FiltersImportant Tip:- In street use, the air filter should be checked and cleaned if necessary between the actual maintenance intervals due to its design (foam).- In off-road sports, the air filter is usually checked after each race and therefore automatically falls within the regular maintenance intervals.

A MUST for every GS, because without this cover, the BMW simply doesn't look complete!The throttle body cover integrates harmoniously into the bodywork of the BMW R 1250 GS / R 1200 GS (LC) from 2017 onwards. Easily mounted with two screws, the cover elegantly conceals the throttle body. The look and feel of the product match the high-quality appearance of the surrounding BMW plastics.Originally finished in black, the cover made of super lightweight polyamide can also be painted in different colors to create an interesting visual accent.

Angeboten wird hier ein Gebrauchtteil Fahrzeug:  R1250GS Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer Teilenummer: 13717726794