JMP fork tubes for upside-down forks made of high-quality aerospace aluminum on modern CNC machining centers with minimal tolerances of up to 5 thousandths of a millimeter. The shapes of the OE tubes are replicated 1:1. Anodized in color like the OE part.

Fork Tubes by JMP   - made from high-quality raw materials - special chrome coating with low breakaway torque - each fork tube undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down:   No Outer diameter:   37 mmInner diameter:   32.1 mmLength:   588 mmTop connection:   No thread Bottom connection:   No thread Color:   chrome

Fork Repair KitTechnical Data:Seal: Outer Diameter: 37 mmSeal: Installation Height: 47 mmSeal: Total Height: 11 mm

Vehicle: R1250GS R1200GS LC Manufacturer: BMW Condition: New Description: sold as shown, 4 pieces Part Number: 31488550092

Dust caps from JMP   - better breakaway torque and lower friction due to special grease coatingTechnical Data:Inner diameter:   37 mmOuter diameter:   47.4 mmInstallation height:   4.6/14 mmTotal height:   14 mmManufacturer:   Athena

Absolutely stable and high-quality film, protects against stone chips and other damage.Black film with white print. Very easy and quick to apply, strongly adhesive.- for both sides Also suitable for KTM 1190 Adventure and 1290 Super Adventure.

In addition to our rear axle crash pads, we also offer crash pads for the front axle of your GS. These small but effective parts protect the critical points of your bike and prevent damage to the fork leg and axle seat in the event of a fall. Available as a set for both sides.

JMP fork tubes for upside-down forks made of high-quality aerospace aluminum on modern CNC machining centers with minimal tolerances of up to 5 thousandths of a millimeter, for example, produced under sliding bearings. The shapes of the OE tubes are replicated 1:1. Anodized in color like the OE part.   WARNING: For gold fork tubes, there may be color deviations compared to the OE part during anodizing for technical reasons. Both tubes may need to be replaced if necessary.

JMP Fork Reflector Oval   Color: yellow Curved back for mounting on the fork tube with self-adhesive film   Dimensions: 99x27 mm   E-approved            Technical Data:Shape:   oval Color:   yellow Mounting:   self-adhesive Height:   96 mmWidth:   24 mmSpecial Feature:   curved for example for fork tube

In addition to our rear axle crash pads, we also offer crash pads for the front axle of your GS. These small but effective parts protect the critical points of your bike and prevent damage to the fork leg and axle seat in the event of a fall. Available as a set for both sides.

Even in minor falls or when the motorcycle tips over, the front wheel can hit the ground in such a way that the standard steering stop on the fork bridge gets bent or sheared off. Replacing the fork bridge is expensive and frustrating, and additional parts can also be damaged. The Hard Part is made from laser-cut stainless steel and tough plastic components that absorb the impact. Additionally, a small distance is dampened by a rubber buffer. The steering angle is hardly limited by the Hard Part.The stainless steel part is coated in yellow plastic powder.The delivery includes all necessary mounting materials such as adhesive pads, screws, and nuts.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5298-0 for that.Not suitable for special model R1250GS "HP" with special equipment "Sport Suspension". Please use 01-045-5298-0 for that.- Weight: approx. 250 g- Dimensions: approx. 175 mm x 85 mm x 55 mm