Infinitely adjustable folding mirror in length and angle, universally suitable for most motorcycle models.- Suitable for left and right- With ECE approval mark!Scope of delivery: - 1 mirror- Mounting adapter:1x M8 x 1.25 with right-hand thread1x M8 x 1.25 with left-hand thread1x M10 x 1.25 with right-hand thread1x M10 x 1.25 with left-hand threadFor BMW R1200GS/ R1200GS Adventure/F850GS/ F750GS/ F800GS/ F700GS/ F650GS(Twin)/ HP2/ R1250GS/ R1250GS Adventure and Triumph Tiger 1050, the adapter M10x1.5 (01-040-0761-0) is required!

Protects the radiator and frame tail from stone chips. Easy installation through plug and play. Additional protection against splashes during rainy rides. Meaningful addition for off-road use. Reinforced enduro look. Includes mounting materials. Additional Information

The Airtube left side incl.Flap in Carbon for the BMW R 1250 GS (LC) from MY 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airtube left side incl.Flap in Carbon for the BMW R 1250 GS (LC) from MY 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airtube right side (for the orig. stainless steel deflector) in Carbon for the BMW R 1250 GS (LC) from MY 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airtube right side incl.Flap in Carbon for the BMW R 1250 GS (LC) from MY 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airvent cover left side in Carbon for the BMW R 1250 GS from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airvent cover left side in Carbon for the BMW R 1250 GS from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airvent cover right side in Carbon for the BMW R 1200 GS (LC) from MY 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 and BMW R 1250 R and RS with splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can be used with the rear splash guard! It will be mounted by tape which is included.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 without splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can not be used with the rear splash guard!It will be mounted by tape which is included.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Brake-pipe Cover Carbon - BMW R 1250 GS from 2019 for the individual style of the bike  This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The right heel guard in carbon for the BMW R 1250 GS replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness.The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. Corresponds to BMW part number: 46 71 8 554 072

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The ESA-Box cover in Carbon for the BMW R 1250 GS from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.   The cover for the ESA box is only suitable for the 2019 model year. A comparable protective effect can be achieved by combining the carbon parts RHL.028.GS19T.K and RHR.029.GS19T.K together with the rear hugger. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The BODYSTYLE fender extension made of high-strength ABS plastic in matte black extends the original front fender and protects against dirty engine casings, clogged radiators, or damage from stone chips. The extension can be painted and is easy to install. Dimensions 120 mm (extension) Material ABS plastic Color matte black Installation ready to install with all necessary parts

We modified our front mudgard for the BMW R 1250 GS from 2019 on the rear part for a better splash protection. espacilly when is used also our sump guard/undertray the protection for the motor increase a lot. The weight of the part is only about 260 g!This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Item from Return!!! Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

The high, tinted windscreen emphasizes the sporty character of the machine. The scratch-resistant coating ensures long-term durability of the tinted windscreen. Dimensions and shape correspond to the clear stock windscreen, thus maintaining good wind and weather protection. Optical enhancement and customization. Scratch-resistant coating. Dimensions and shape like stock windscreen.

Original BMW Zubehör, Getöntes Windschild für die R1200GS LC Einfacher Austausch gegen das Original Windschild BMW Teilenummer: 77338403975

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application