A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

The exposed rear axle housing unfortunately suffers greatly during off-road rides and is often damaged so severely that further travel is out of the question.To avoid scratches and stone chips, as well as more serious damage when hitting gravel or other obstacles, we have developed a perfect protection.It fits snugly around the cardan housing like a protective hand and is made from extremely impact-resistant, fiberglass-reinforced plastic. Of course, we have taken into account the cooling air supply provided by BMW and left the corresponding opening at the bottom free.Last but not least, our cardan grinding protection gives your BMW a distinctive, individual look!The attachment is done with an easy-to-install mounting kit made of anodized aluminum.Optional: Cardan crash pad 01-045-5505-0-made of fiberglass-reinforced PU plastic-easy to install-maximum protection effect -lightweight-fascinating appearance-repellent function even against branches and loose stonesColor: black

Secure Hepco&Becker aluminum protection for the cardan shaft. Bent and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points Includes mounting materials and instructions

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS (LC) Adventure . The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. You will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for *BMW R1200GS (LC) Adventure 2014-2018 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be done by a professional workshop.   Scope of delivery: - Replacement spring for the front original shock absorber. - Replacement spring for the rear original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.                        

These progressive replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS(LC)/R1250GS Adventure. The front and rear shock absorbers thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS(LC)/R1250GS Adventure 2014-2018 without BMW Dynamic ESA*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop.Scope of delivery:- Replacement spring for the front original shock absorber.- Replacement spring for the rear original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us

Die Touratech Radnabenabdeckung besteht aus hochwertig eloxiertem Aluminium und die edle Laserbeschriftung setzt Akzente in Sachen Stil.Darüber hinaus bietet sie effektiven Schutz für die Radnabe Ihrer wertvollen GS.

Original BMW Accessories for Installation on the Rear Axle Rear Axle Cover Additional Information

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS Adventure. The shock absorber thus has a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS Adventure 2014-2023 with BMW Dynamic ESA* Our recommendation: The conversion of the replacement springs should, especially with ESA shock absorbers, be carried out by a specialist workshop. Scope of delivery: - Replacement spring Linear 158N/mm Rear for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS Adventure in our accessory recommendation. When replacing only one component, optimal handling is not achieved. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Replacement spring linear (55 N/mm) front for original shock absorber. - Replacement spring linear (150 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.                        

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS Adventure models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS Adventure 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Linear replacement spring (60 N/mm) front for original shock absorber. - Linear replacement spring (158 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

Lowering Kit -20mm perfectly tuned to the original shock absorbers of the BMW R1200GS (LC) Adventure model. With this spring kit, you achieve a sensible lowering of -20mm while maintaining consistently good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1200GS (LC) Adventure. The suspension continues to offer good responsiveness and high safety in critical situations after the conversion. By replacing the springs at the front and rear, the balance of your motorcycle is preserved. Info: Fits only for “BMW R1200GS (LC) Adventure from 2014-2018 with BMW Dynamic ESA”   Our recommendation: Have the conversion performed by a professional workshop.   Scope of delivery: - Replacement spring -20mm front for original shock absorber. - Replacement spring -20mm rear for original shock absorber. - Installation instructions.   Info: The side stand and main stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.                        

With the GS through knee-deep water - no problem. Unfortunately, not quite!A small inconspicuous valve on the final drive ensures the necessary ventilation and pressure equalization inside the housing. If the vent valve gets submerged, moisture can be sucked into the final drive, potentially damaging it.The solution to the problem: relocating the final drive vent to a protected position.Using two robust, aluminum-turned connection pieces and a durable hose, the valve can be easily relocated to a safe spot on the vehicle.An absolute MUST for any long-distance trip! compatible with: HP2 Enduro 2004 - 2006R 1150 GS 1999 - 2004R 1150 GS Adventure 2001 - 2006R 1150 R 2000 - 2006R 1200 GS 2003 - 2018R 1200 GS Adventure 2005 - 2018R 1250 GS 2018 - 2023R 1250 GS Adventure 2018 -R 1250 R 2018 -R 1250 RS 2018 -R 1300 GS 2022 -R nineT 2013 -

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in suspension technology for your BMW R1200GS/R1250GS Adventure with DDC autoleveling equipment. This premium shock absorber is specifically designed for long-distance travel with heavy luggage, on  any road surface, including off-road stages  . This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important Note:- We recommend replacing the rear and front shock absorbers together with this suspension solution.- Only then can the best possible handling be achieved with this premium suspension. Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber “rear"- Ready for installation with connection plug and wiring. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our Suspension Check. Do you have further questions?  We are happy to advise you personally contact us

The Touratech Suspension DDA / Plug & Travel Suspension is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium suspension is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC suspension. The existing connectors and switches on the handlebars are utilized. Thus, the Touratech suspension is integrated into the motorcycle via the original BMW control unit. You can continue to use all standard pre-settings for the various riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel Suspension is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this suspension is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber- Touratech Suspension DDA Plug & Travel rear shock absorber- Ready for installation with connection plug and wiring. The basic setup provided here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

Progressive Springs for Fork and Shock Absorber for BMW R 1250 GS LC ADVENTURE ESA 2018 - 2021 These progressive replacement springs are perfectly matched to the shock absorbers of your motorcycle. This results in better tuning for the demands of motorcycle travel. Additionally, you will experience significantly improved responsiveness and higher reserves in the limit range. Scope of delivery: - Replacement spring for original front shock absorber. - Replacement spring for original rear shock absorber. - including detailed installation instructions. Our recommendation: Have the conversion carried out by a specialist workshop. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

Feiere mit Touratech das 35-jährige Jubiläum und erlebe die limitierte „35 ANNIVERSARY EDITION“ der Touratech Extreme2 Fahrwerke – entwickelt für maximale Performance in den härtesten Offroad-Bedingungen. Für alle, die ihre R1250GS bis an die Grenzen führen, sind diese Dämpfer das unverzichtbare Upgrade, das dir unter extremen Bedingungen volle Kontrolle verschafft. - Großer, fein abgestufter Einstellbereich für 100% individuelle Anpassung. - Verbesserter Durchschlagschutz durch optimierte PDS-Funktion. - Innovatives „low friction“-Kolbenband – Minimiert Reibung, maximiert Reaktionsgeschwindigkeit. Der neu entwickelte Dämpfer setzt neue Maßstäbe in Individualisierung und Benutzerfreundlichkeit. Mit einem erweiterten Einstellbereich lässt sich die Zug- und Druckstufe präzise und fein abgestuft anpassen, um das Fahrwerk exakt auf die individuellen Bedürfnisse abzustimmen. Dank der neuen elektronischen Federvorspannung im kompakten Design gestaltet sich die Installation schnell und unkompliziert – ganz ohne bislang übliche externe EPA-Pumpen. Robust, platzsparend und effizient optimiert sie das Fahrwerk, während die Pumpe den verfügbaren Platz unauffällig nutzt und die GS schlank sowie immer bereit für jedes Abenteuer bleibt. Mit einem 46 mm großen Dämpferkolben, ausgestattet mit einem „Low Friction“-Kolbenband, sorgt das System für ein äußerst direktes und sensibles Ansprechverhalten. Der Trennkolben enthält eine zusätzliche Führung, die das Gleiten reibungsarm unterstützt und somit das Ansprechverhalten weiter verbessert. Die weiterentwickelte Funktion des progressiven Dämpfungssystems (PDS) mit einem neu konstruierten Hydraulikstopp verhindert zuverlässig das Durchschlagen, selbst in extremen Situationen. Ein vergrößertes, zweiteiliges Reservoir sorgt für mehr Ölvolumen und eine maximierte Kühlfläche, was eine effektive Wärmeableitung ermöglicht und die konstante Dämpferleistung auch bei extremen Belastungen garantiert. Verschiedene Einstellmöglichkeiten machen die „Limited Edition“ Federelemente zu einem flexiblen System. Während die Zugstufendämpfung am Federbeinfuß eingestellt wird, lässt sich die doppelte Druckstufeneinstellung am Ausgleichsbehälter über einen besonders weiten Einstellbereich präzise anpassen. Der Low- und High-Speed-Bereich lässt sich zudem besonders einfach durch unterschiedlich farblich gekennzeichnete Einsteller justieren. Für Fahrzeuge mit elektronischem DDA-Fahrwerk enthält das Tuning-Package passende Cancellation Plugs, die einfach auf die vorhandenen Stecker gesteckt werden und Fehlermeldungen im Cockpit verhindern. Wie alle Federelemente von Touratech Suspension sind auch die neuen „Limited Edition“ Federbeine voll servicefähig. Nach intensiven Fahrten oder Belastungen lassen sich die Dämpfer zerlegen und überholen, um eine konstante Performance und langfristigen Fahrspaß unter extremen Bedingungen sicherzustellen. Das hier verbaute Grund-Setup ist abgestimmt auf Fahrer bis 100 kg zuzüglich Reisegepäck. Anpassungen bei sehr viel höheren Zuladungen oder anderen außergewöhnlichen Anforderungen sind möglich. Das Federbein wird dann von uns individuell an Ihre Bedürfnisse angepasst. Lieferumfang: - 2x Limitierte „TOURATECH SUSPENSION 35 ANNIVERSARY EDITION“ Aufkleber - Einbaufertiger Touratech Suspension Stoßdämpfer für vorne - Einbaufertiger Touratech Suspension Stoßdämpfer für hinten - Cancellation Plugs -Stecker Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns. E-Mail: [email protected] ; Telefon: +49 (0)7728-9279-1555 Bitte nutzen Sie dafür unseren Fahrwerkscheck-Bogen und senden Sie uns das Formular ausgefüllt zu.

Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS Adventure with original factory lowering adjustment. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS Adventure. The suspension continues to offer good responsiveness and high safety in critical situations after the modification. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering”   Our recommendation: Have the modification carried out by a professional workshop.   Scope of delivery: - Replacement spring -25mm front for original shock absorber with factory lowering. - Replacement spring -25mm rear for original shock absorber with factory lowering. - Installation instructions.   Info: Side stand and center stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.                          

The lowering by 40mm for your BMW R1200GS Adventure with BMW DDC equipment. This Touratech Suspension DDA / Plug & Travel Premium chassis is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adjusts to your adventure. You just have to ride off. The absolute top class in suspension technology   This Touratech Suspension DDA / Plug & Travel chassis is made with the same precision components and parts that have already proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Important note: With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS Adventure, the side stand and/or main stand must be adjusted.   Scope of delivery: - Touratech Suspension DDA Plug & Travel shock absorber front -40mm - Touratech Suspension DDA Plug & Travel shock absorber rear -40mm - Ready for installation with connection plug and wiring.   The installed base setup is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

The lowering by 40mm for your BMW R1200GS/R1250GS Adventure with BMW DDC auto-leveling. This Touratech Suspension DDA / Plug & Travel Premium chassis is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adjusts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is made with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are thus more stable and the seals are less stressed. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS Adventure, the side stand and/or center stand must be adjusted. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -40mm- Touratech Suspension DDA Plug & Travel rear shock absorber -40mm- Ready for installation with connection plug and wiring.The basic setup used here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS Adventure model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering”   Our recommendation: The installation of the replacement springs should be done by a professional workshop.   Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions.   Our recommendation: Have the installation done by a professional workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

With this cover, you can conceal the mounting points of the rear wheel cover if you want to forgo the wheel cover.(Off-road use, aesthetics)- Made from 2 mm aluminum- Surface anodized black