Protects the radiator and frame tail from stone chips. Easy installation through plug and play. Additional protection against splashes during rainy rides. Meaningful addition for off-road use. Reinforced enduro look. Includes mounting materials. Additional Information

The Airvent cover left side in Carbon for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airvent cover right side in Carbon for the BMW R 1250 GS Adventure starting from MY 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 and BMW R 1250 R and RS with splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can be used with the rear splash guard! It will be mounted by tape which is included.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 without splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can not be used with the rear splash guard!It will be mounted by tape which is included.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Brake-pipe Cover Carbon - BMW R 1250 GS from 2019 for the individual style of the bike  This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ESA-Box cover in Carbon for the BMW R 1250 GS from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.   The cover for the ESA box is only suitable for the 2019 model year. A comparable protective effect can be achieved by combining the carbon parts RHL.028.GS19T.K and RHR.029.GS19T.K together with the rear hugger. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The left flap / watercooler cover for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The right flap / watercooler cover for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front beak / upper mudgard for the left side is a direct replacement for the original component of the BMW R 1250 GS Adventure from 2019 and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.The weight of the parts is only about 320g!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front beak / upper mudgard for the right side is a direct replacement for the original component of the BMW R 1250 GS Adventure from 2019 and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.The weight of the parts is only about 320g!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

We modified our front mudgard for the BMW R 1250 GS from 2019 on the rear part for a better splash protection. espacilly when is used also our sump guard/undertray the protection for the motor increase a lot. The weight of the part is only about 260 g!This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The high, tinted windscreen emphasizes the sporty character of the machine. The scratch-resistant coating ensures long-term durability of the tinted windscreen. Dimensions and shape correspond to the clear stock windscreen, thus maintaining good wind and weather protection. Optical enhancement and customization. Scratch-resistant coating. Dimensions and shape like stock windscreen.

This is a used part being offered Vehicle: R1250GS Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, scratches on the housing, glass in good condition Part number: 51168567448

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-fit transparent glossy paint protection film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of delivery Paint protection film set detailed instructions for application

The rear hugger for the BMW R 1250 GS replaced the orginial part easily. mounting with only 3 bolts on the bevel housing of the bike. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Safety rearview mirror is the ideal motorcycle mirror for your adventure bike. It fits any motorcycle with a M10 x 1.5 right-hand thread mirror mount. The mirror not only looks great, but it is also made of high-quality and extremely durable plastic.Thanks to the aspherical part, the visible area is enlarged - thus the "blind spot" is a thing of the past. The ball joint allows for easy adjustment of the rearview mirror. A sensible safety feature - for city traffic, country roads, and highways! Sold as a set for the left and right side.With ECE approval mark!Dimensions:Overall approx. (hxb) 160 x 260 mmGlass approx. (hxb) 82 x 140 mm

Bolt

The high-quality material mix of plastic and stainless steel combines stability, low weight, and a unique appearance. Manufactured on precision machines, these protective parts fit perfectly and are incredibly easy to install. Supplied as a set for both sides.The fairings made from a plastic/stainless steel mix are easy to mount and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side fairings not only protect against splash water on the road and kicked-up dirt during off-road rides but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side fairing is connected by a high-quality laser-engraved stainless steel part, creating a perfect and easily removable unit. This also reduces the risk of snagging your boot on the vehicle frame, preventing any gear from unintentionally getting caught on the vehicle.Suitable for installation of the DIN ISO 4165 on-board socket (standard equipment from EURO5)