Hex ezCAN GEN 2   HEX ezCAN 4-channel CAN Bus accessory manager for freely programmable control of retrofitted headlights, horns, brake lights, and other electrical consumers via the original switches of a BMW motorcycle. Splash-proof, max. load 4x10A (25A for 20 seconds), each electronically protected, including 4 connection plugs (2 or 3-pin), USB cable, and mounting materials, as well as instructions (EN) and Windows PC / Mac configuration software (Online).   No registration required due to E11 certification mark.  

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

This new charger is the logical evolution of the successful and proven built-in socket 01-030-0084-0. All weatherproof and BMW Plug-and-Play features remain the same, but the electronics take it a step further. The built-in socket features a USB-A and a USB-C port, but the most important aspect is the 12 different fast charging protocols with automatic detection of the connected device.The USB ports can be separately covered with custom-fit rubber caps. An unused port is thus safely protected from environmental influences such as water and dirt!Technical Data:Input: 8 to 30 Volts DCVarious fast charging protocols automatically adjust the power to the connected device.Supported fast charging protocols:USB-C port only: USB PD3.0/PD2.0/PPS (for Apple fast charging, an Apple Lightning to USB-C cable must be used).Both ports: Qualcomm Quick Charge QC4+/QC4/QC3.0/QC2.0, Samsung AFC, Huawei FCP and SCP, MediaTek PE2.0/PE1.1, Spreadtrum SFCP, OPPO VOOC.Others: BC1.2, Apple 2.4APower:USB-C: 5V⎓3A / 9V⎓3A / 12V⎓3A (36W max.)USB-A: 4.5V⎓5A / 9V⎓3A / 12V⎓3A (36W max.)USB-C + USB-A: 5V⎓4.8A (24W max.) 

Let's be honest: Do you really use the DIN socket on your BMW? Simply replace it with the much more useful dual USB socket! Charge your smartphone, camera, GPS, etc. without an adapter while riding!- Input voltage: 10 to 40 V- Output voltage (USB ports): 5 V +/- 5%- Overvoltage, overheating, and short-circuit protection- Only compatible with CanBus- Port 1: 2.3 A / Port 2: 1.0 A- Intelligent device recognition: detects Apple (complies with MFi standard) or Android (BC1.2)- Weatherproof: independent port rubber covers- Plug-and-play replacement for BMW motorcycle DIN socket

For the individual installation of this cigarette lighter socket, you can use the integrated mounting bracket and the included cable ties. If your handlebars do not provide enough space, simply use the included extra-narrow handlebar mount. Of course, installation in the fairing is also possible.The spring-loaded cover does not flap in the wind and provides weather protection. The 7.5 A fuse can be mounted freely at the most convenient point in the wiring. The small hole at the bottom of the housing prevents moisture from forming in the socket.- Compact design- Flat spring-loaded cover- Long connection cables: 1.3 m- Integrated holding bracket- Extra-narrow handlebar mount- Option for fairing installation (27 mm)- Includes 7.5 A fuse

This set is used for relocating the DIN socket so that it can continue to be used after the installation of the double USB socket 01-030-0084-0.This allows you to continue using your BMW battery charger and even an air compressor for the tires.Your package includes the following items:- Mounting bracket- Wiring harness for battery connection with fuse

The tank bag cable is equipped on the vehicle side with a compact DIN angled plug and on the tank bag side with a USB twin charger (USB-A and USB-C). The tank bag cable is ideal for plugging into the standard onboard sockets of BMW, Triumph, and Ducati, or into a small retrofitted DIN onboard socket (SD14/22). It allows for easy charging of USB devices such as mobile phones, cameras, or other electrical consumers simply by placing them in the tank bag. – Compact DIN angled plug – USB-A and USB-C socket each 3.6A – No vehicle installation required – Power consumption only when the plug is inserted – 1.5 m cable