This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.You can find a short video of our part in the category product Videos!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1200 GS (LC from 2013) / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 without splashback This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Mit dieser Blende können Sie die Anschraubpunkte der hinteren Radabdeckung abdecken, wenn Sie auf die Radabdeckung verzichten möchten.(Geländeeinsatz, Optik)- Gefertigt aus 2 mm Aluminium- Oberfläche eloxiert alu natur

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

The exposed rear axle housing unfortunately suffers greatly during off-road rides and is often damaged so severely that further travel is out of the question.To avoid scratches and stone chips, as well as more serious damage when hitting gravel or other obstacles, we have developed a perfect protection.It fits snugly around the cardan housing like a protective hand and is made from extremely impact-resistant, fiberglass-reinforced plastic. Of course, we have taken into account the cooling air supply provided by BMW and left the corresponding opening at the bottom free.Last but not least, our cardan grinding protection gives your BMW a distinctive, individual look!The attachment is done with an easy-to-install mounting kit made of anodized aluminum.Optional: Cardan crash pad 01-045-5505-0-made of fiberglass-reinforced PU plastic-easy to install-maximum protection effect -lightweight-fascinating appearance-repellent function even against branches and loose stonesColor: black

Secure Hepco&Becker aluminum protection for the cardan. bent and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points including mounting materials and instructions

Die Touratech Radnabenabdeckung besteht aus hochwertig eloxiertem Aluminium und die edle Laserbeschriftung setzt Akzente in Sachen Stil.Darüber hinaus bietet sie effektiven Schutz für die Radnabe Ihrer wertvollen GS.

With the GS through knee-deep water - no problem. Unfortunately, not quite!A small inconspicuous valve on the final drive ensures the necessary ventilation and pressure equalization inside the housing. If the vent valve gets submerged, moisture can be sucked into the final drive, potentially damaging it.The solution to the problem: relocating the final drive vent to a protected position.Using two robust, aluminum-turned connection pieces and a durable hose, the valve can be easily relocated to a safe spot on the vehicle.An absolute MUST for any long-distance trip! compatible with: HP2 Enduro 2004 - 2006R 1150 GS 1999 - 2004R 1150 GS Adventure 2001 - 2006R 1150 R 2000 - 2006R 1200 GS 2003 - 2018R 1200 GS Adventure 2005 - 2018R 1250 GS 2018 - 2023R 1250 GS Adventure 2018 -R 1250 R 2018 -R 1250 RS 2018 -R 1300 GS 2022 -R nineT 2013 -

The Touratech Suspension Extreme Shock Absorber. The name says it all. With the "Extreme," the suspension is not automatically and continuously adjusted. The necessary adjustments are made manually, balancing the motorcycle according to the load. The hydraulic bottoming protection PDS ensures that the spring elements do not "bottom out," even under the most challenging terrain conditions and with heavy luggage. The "Extreme" suspension from Touratech Suspension for the BMW R1200GS (LC) provides more stability and comfort even in the toughest terrain and on thousands of kilometers of trails, resulting in greater safety and riding pleasure. A suspension that is uncompromisingly tuned for your world tour. INFO: Does not fit BMW ESA Next Generation "Autolevelling" from 2018For the BMW R1200GS (LC) without DDC suspension (Dynamic Damping Control), Touratech Suspension offers a "conventional" alternative. The "Extreme" shock absorber has been manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the harshest conditions in our suspensions. This means for you: Any luggage volume from the tail bag to the loaded luggage system and/or passenger operation is accommodated by the Extreme adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for an effective, precise, and personalized suspension setting at any time. The hydraulic bottoming protection PDS also effectively prevents mechanical bottoming at the end of the suspension travel. NOTE: Do you want to install an Extreme suspension in your BMW R1200GS (LC) 2013-2017 with DDC?To avoid error messages on the display regarding the DDC system (Dynamic Damping Control) when switching to the Touratech Suspension Extreme suspension, Touratech has developed an "optional" deactivation plug (01-045-5879-0) for BMW. This ensures that the riding modes: - ASC, ABS, and DTC continue to function perfectly. The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in chassis technology for your BMW R1200GS equipped with BMW DDC. This premium shock absorber is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride.   This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.   Important Note: - We recommend replacing both the rear and front shock absorbers together with this suspension solution. - Only then can the best possible handling be achieved with this premium suspension.   Scope of delivery: - Touratech Suspension DDA Plug & Travel shock absorber “Rear" - Ready for installation with connection plug and wiring.   The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.   Do you have further questions? We are happy to advise you personally contact us

This Touratech Suspension DDA / Plug & Travel shock absorber is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium shock absorber is specifically designed for long-distance travel with heavy luggage, on any road surface, including off-road stages . This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. Thus, this shock absorber is integrated into the motorcycle via the original BMW control unit. This shock absorber can be used in combination with the original BMW front shock absorber. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this shock absorber is the high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any driving situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important Note:- We recommend replacing both the rear and front shock absorbers together with this suspension solution.- Only then can the best possible handling be achieved with this premium suspension.Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber “Rear"- Ready for installation with connection plug and wiring. The basic setup here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted by us with a spring of higher spring rate to meet your needs. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally contact us

The Touratech Suspension DDA / Plug & Travel Suspension is the absolute top class in suspension technology for your BMW R1200GS/R1250GS equipped with BMW DDC auto-leveling. This premium suspension is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC suspension. The existing connectors and switches on the handlebars are utilized. Thus, the Touratech suspension is integrated into the motorcycle via the original BMW control unit. You can continue to use all standard pre-settings for different riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just need to ride. This Touratech Suspension DDA / Plug & Travel Suspension is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this suspension is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted in fractions of a second to any riding situation. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed.Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber- Touratech Suspension DDA Plug & Travel rear shock absorber- Ready for installation with connection plug and wiring. The basic setup provided here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

We have designed this deactivation plug for the case that you want to install a Touratech Suspension Extreme chassis in your BMW R1200GS (LC) with DDC chassis In order to avoid error messages on the display regarding the DDC system (Dynamic Damping Control) when switching to the Touratech Suspension Extreme chassis, this "optional" deactivation plug is inserted into the socket of the shock absorber and mounted on the motorcycle. This also ensures that the riding modes: - ASC, ABS, and DTC continue to function perfectly.Important Summary:- Only the standard DDC damping adjustment is deactivated.- One deactivation plug is required per shock absorber.- The BMW riding modes: - ASC, ABS, and DTC continue to function perfectly.- ASC (Automatic Stability Control); ABS (Anti-lock Braking System); DTC (Traction Control)- Prevents an error message in the BMW vehicle display.- Function of the BMW control unit remains fully intact.- High-quality components with matching connectors- The original motorcycle electronics remain intact.- A reversion to DDC is easily possible.Scope of delivery:- 1 piece Touratech Suspension deactivation plug- Including connection cable and matching connector.- Including mounting materials and installation instructionsTIP: We also offer a Touratech Suspension DDA Plug & Travel chassis. In this case, "all" functions and switches on the motorcycle continue to be used.Do you have further questions? We are happy to advise you personally, please contact us

The lowering by 50mm for your BMW R1200GS/R1250GS with BMW DDC auto-leveling equipment. This Touratech Suspension DDA / Plug & Travel Premium chassis is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adapts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -50mm- Touratech Suspension DDA Plug & Travel rear shock absorber -50mm- Ready for installation with connection plug and wiring. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS/R1250GS, the side stand and/or center stand must be adjusted.The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

With this cover, you can conceal the mounting points of the rear wheel cover if you want to forgo the wheel cover.(Off-road use, aesthetics)- Made from 2 mm aluminum- Surface anodized black