BMW R1200GS Adventure LC from Bj. 2014 Main stand guard plate item Description The logical complement to the motor protection! Motor protection is continued over the main stand. Also, the machine can slide in the event of Aufsetzers over the entire area of ​​coverage. Power and visually what forth, some with laser-cut lettering. Accessories for the original main stand BMW

BMW R1200GS Adventure LC lock cylinder for aluminum case + top case With this repair kit you can make your BMW aluminum case  alike equip the vehicle key. This locking cylinder is in aluminum case and  used in the top case R1200GS Adventure LC.

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

BMW R1200GS LCAdventure K51 NEW inside pocket aluminum top case black / silver item Description The bag is waterproof and facilitates loading and unloading of the case enormous. Using the supplied strap, the bag can be worn as a shoulder bag easily. facts Waterproof inner bag made of tarpaulin Volume matched to aluminum case Roll closure with buckle plug Handles and removable shoulder strap 4 buckles laterally outwardly, for securing the interior pockets on suitcase or top case by means of handle set Big GS lettering Type: inside pocket Color: Black, Silver Material: 100% Tarpaulin (100% polyester with a thermoplastic polyurethane coating)

BMW K50 R1200GS LC K51 R 1200 GS Adventure LC original motor protection aluminum Enduro NEW item Description Robust protection of aluminum, 2 mm thick, anodized. Stainless steel holder. Protects the lower engine compartment against stones and bottoming. Significantly wider and longer than series motor protection. Enhances the offroad character. Weight: 1.5 kg. VIN is needed. This product is dependent on the individual equipment and / or production date of your BMW motorcycle.

The frame protector made of black plastic effectively protects the frame from scratches and prevents wear spots caused by motorcycle boots. Frame protector made of polyamide Protects the frame from scratches Especially during heavy boot use off-road Color: black (textured) Fits the following vehicles: - R1200GS LC - R1200GS LC Adventure - R1250GS - R1250GS Adventure

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counter plate easy installation with just a few screws does not require ABE or registration Vehicle-specific notes: for lowered version

Multi-X-Creen (MXC) complete screen with integrated adjustable spoiler. The Multi-X-Creen is a two-part screen, the end of which (spoiler) can be individually adjusted. This is outstanding both visually and functionally. After extensive test rides under various conditions, all our test riders - whose heights range from 1.70m to 1.98m - were able to find the perfect adjustment of the screen for their needs. Despite its understated appearance, the Multi-X-Creen screen offers excellent riding comfort.

With the Touratech reinforcement strut, the BMW engine protection bar of the water-cooled R1200GS becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Fits BMW R1200GS from 2017 (BMW engine protection bar = accessory) and BMW R1200GS-Adventure from 2017 (BMW engine protection bar = standard).Set for both sides!Can be combined with R1200GS-Adventure from 2017 with fairing crash bar extension 045-5165.Also fits the special model "Adventure Triple Black".

BMW R1200GS Adventure R1200GS Adventure LC NEW set back pad for aluminum top case 32 liters item Description Backrest for the passenger for comfort Provides Accidental contact (z. B. in rear-end collisions from behind, hard acceleration maneuvers or in the event of a fall) additional security The complete kit is easy to assemble and convinces with good padding. Fits the following vehicles: K51 R 1200 GS Adv LC K25 R 1200 GS Adv 06 K25 R 1200 GS Adv 08 K25 R 1200 GS Adv 10 K72 F 800 GS 08 K72 F 800 GS 13 K75 F 800 GS Adv K75 F 800 GS 16 Adv

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlargement, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlargement a great look and full stability. With a secure attachment of the foot enlargement, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered chassis.Suitable for special model R1200GS "Rallye" with special equipment "Sport chassis".Attention: Regardless of the respective model year, different side stands have been installed, so we recommend additionally checking the shape of your side stand.Please use for: - Wide shape 1021-01-045-5276-0- Narrow shape 01-045-5275-0

Perfect protection and value retention for your GS! Our side covers fill two unsightly gaps in the rear area of the R1200GS and are not only visually appealing and perfectly shaped, but also practical!Experience over many years has shown that protecting the painted frame tubes in the boot area is absolutely necessary.Side Covers:The covers made from a mix of plastic and stainless steel are easy to install and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side covers not only protect against splash water on the road and kicked-up dirt during off-road rides, but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side cover is connected by an anodized, high-quality laser-engraved stainless steel part to form a perfect and easily removable unit. This also reduces the risk of getting caught with your boot on the vehicle frame, preventing any equipment from unintentionally snagging on the vehicle.Frame Protection:Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use can quickly make the frame unsightly as the paint wears off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Scope of delivery:- Side covers, left and right (with socket preparation) - Small frame protection, left and right- Mounting materialsColor: black

BMW K51 R1200GS Adventure LC Set of Tinted Wind Deflectors NEW Product Description Tinted wind deflectors for right and left for optical enhancement and customization Shape identical to the original wind deflectors of the R 1200 GS Adventure (K51)

The cover brings a breath of fresh air to the overall look of your motorcycle. It has been specifically designed to fit the space of the crash bar and significantly enhances its design. Not only does it look elegant, but it also further increases the protective effect of the bar.A total of 3 clamps secure the cover and ensure extremely good stability. Stone chips and scratches are effectively prevented.The cover is made of laser-cut anodized aluminum, making it both lightweight and durable.Details:- optical highlight- for even more protection and stability- enhances the original BMW fairing bar visually.- shape and design precisely adapted to the original crash bar- secured by 3 clamps for extremely secure and strong hold- made of anodized aluminum, therefore resistant to weather influences- tested and proven in tough travel conditions- produced in-house and "Made in Germany"- color: silver/black

Even better protection for adventure-seekers and their Adventure-GS. The Touratech crash bar extension made of stainless steel provides assistance when the original crash bar of the R 1200 GS Adventure is no longer sufficient. And that can happen faster than one would like. Specifically, when the motorcycle tips over beyond the crash bar, potentially damaging fairing parts or even the sensitive aluminum tank. This can not only be costly but, in the worst case, abruptly end a beautiful journey. The crash bar extension made of robust, electropolished stainless steel is easy to maintain and resistant to rust. The clever four-point bolting distributes forces occurring during a fall or impact across the frame, causing minimal damage. Even deep scratches can be easily polished out.Details:- precisely matched in design, color, and material to the original crash bar- bolts onto the original BMW engine protection bar- main mounting points are positioned to distribute forces across the frame- additional profiled stainless steel plate for increased stability and added safety- better protects the cylinder head and sensitive aluminum tank from damage - made of electropolished stainless steel, thus resistant to rust- even deep scratches can be easily polished out- unrestricted knee and leg freedom- proven, tested, and reliable in tough travel conditions- produced in-house and "Made in Germany"Note: Not compatible with the stainless steel reinforcement strut for the original BMW engine protection bar for BMW R1200GS from 2013/ BMW R1200GS Adventure from 2014 (01-045-5164-0)Additional information on mounting: The Touratech crash bar extension is bolted at two points to the main frame of the vehicle and the original crash bar to better distribute the forces during a fall or impact and protect the vehicle from serious damage. Additional stability of the crash bar extension is achieved through two more mounting points on the crash bar. All necessary parts for installation are included. No special tools required.

Maximum protection for every demand!Even our small frame protector (045-5037) impresses with its effectiveness. However, those who desire more protective coverage for the entire vulnerable footpeg/frame area should opt for this larger version to prevent paint wear and frame damage.This product features a precisely fitting plastic cover that convincingly protects three main frame tubes, the swingarm bearing area, and the front fastening of the Paralever strut from wear and dirt damage.All of this with the simplest installation and perfect, play-free execution! -tough and capable of withstanding any load-lightweight and temperature-stable-incredibly easy to install-perfectly protects against damage to the lattice frameColor: black

Maximum protection for every demand!Even our small frame protector (045-5038) impresses with its effectiveness. However, those who desire more protective coverage for the entire vulnerable footpeg/frame area should opt for this larger version to prevent paint wear and frame damage.Here, a precisely fitting plastic cover convincingly protects three main frame tubes, the swingarm bearing area, and the front fastening of the Paralever strut from damage due to abrasion and dirt.All of this with the simplest installation and perfect, play-free execution! - tough and capable of withstanding any load- lightweight and temperature stable- incredibly easy to install- perfectly protects against damage to the lattice frameColor: black

Protects the valve control from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

Protects the flap control from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

Without a functioning side stand switch, your ride with the GS-Adventure is immediately over, as the ignition is interrupted.With the Touratech side stand switch protection, this extremely important component is perfectly protected from damage. Neither the tip of your boots nor branches or stones can harm it.Made from 1.5 mm thick stainless steel and supplied with all the necessary parts for installation, this nearly indestructible protection can be easily and quickly mounted.An absolute safety plus, both on and off-road!

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in no time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Color: black

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in a very short time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide a stunning effect with minimal effort!Color: black