Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

The Airventcover in carbon for the BMW R 1200 GS (LC) Adventure from 2014 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airventcover in carbon for the BMW R 1200 GS (LC) Adventure from 2014 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.You can find a short video of our part in the category product Videos!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Brake-pipe Cover Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The mounting adapter for the folding mirror 040-0760 is required for:BMW R1200GS/ R1200GS Adventure/F900GS/F850GS/ F750GS/ F800GS/ F700GS/ F650GS(Twin)/ HP2/ R1250GS/ R1250GS Adventure and Triumph Tiger 1050Scope of delivery:1 piece

The high, tinted windscreen emphasizes the sporty character of the machine. The scratch-resistant coating ensures long-term durability of the tinted windscreen. Dimensions and shape correspond to the clear stock windscreen, thus maintaining good wind and weather protection. Optical enhancement and customization. Scratch-resistant coating. Dimensions and shape like stock windscreen.

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

RockerCover Cover (Left) Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

BMW R 1200 GS Adventure LC (from 2014) Beak front fender upper left side with ABE The upper front fender for the BMW R 1200 GS (LC) Adventure from 2014 replaces the original part using the original Befestigungspunkte.Im focus is on weight reduction (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

The high-quality material mix of plastic and stainless steel combines stability, low weight, and a unique appearance. Manufactured on precision machines, these protective parts fit perfectly and are incredibly easy to install. Supplied as a set for both sides.The fairings made from a plastic/stainless steel mix are easy to mount and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side fairings not only protect against splash water on the road and kicked-up dirt during off-road rides but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side fairing is connected by a high-quality laser-engraved stainless steel part, creating a perfect and easily removable unit. This also reduces the risk of snagging your boot on the vehicle frame, preventing any gear from unintentionally getting caught on the vehicle.Suitable for installation of the DIN ISO 4165 on-board socket (standard equipment from EURO5)

Carbon Spritzschutz für BMW R 1200 GS (LC) Leicht und robust Ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte. Gewichtsersparnis von ca. 70% im Vergleich zum Original. Höhere Steifigkeit für verbesserte Performance. Premium Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven. Schutz durch klare Kunststoffbeschichtung statt herkömmlichem Klarlack. Erhöhte Kratzfestigkeit und Beständigkeit gegen Umwelteinflüsse. Betont die dreidimensionale Wirkung der Carbonstruktur. Für leidenschaftliche Motorradfahrer, die das Beste für ihre BMW R 1200 GS wollen. Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Contour cutTIP: Can be universally mounted on aluminum cases! For example, on the original aluminum cases of the BMW R1200GS-ADV or BMW F800GS.Size: 10.5 x 3 cm

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Item from Return!!! Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The black anodized splash guard is mounted behind the license plate holder and extends it downwards and backwards. It effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. The aluminum splash guard additionally stabilizes the license plate and prevents it from vibrating loose. Material: black anodized aluminum