Rear axle & chain

Ball Bearing

Original BMW Bellows Rear Swingarm BMW Part Number: 33171452504

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

O-Ring Inner Cover of the Drive Shaft 171.1X2.62MMTechnical Data:Outer Diameter:   171.1 mmHeight:   2.62 mmMaterial:   Rubber Design:   Round

These progressive replacement springs are perfectly matched to the original shock absorbers of the BMW R1150GS. The front and rear shock absorbers thus have a better tuning for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1150GS 1999-2013 BMW original shock absorbers*Delivery includes: detailed installation instructions.Our recommendation: The replacement spring installation should be done by a professional workshop.Delivery contents:- Replacement spring for the front original shock absorber.- Replacement spring for the rear original shock absorber.- Installation instructions.Do you have further questions? We are happy to advise you personally, please contact us.

This is a used part being offered Vehicle: R1200C Manufacturer: BMW Condition: noticeable signs of wear Description: sold as shown, discoloration Part number: 34512314169

Oil Seal Corteco   Corteco seals are characterized by their outstanding sealing properties and high durability, meeting original quality standards.Technical Data:Inner Diameter:   85 mmOuter Diameter:   110 mmWidth:   10 mm

This shock absorber is the right choice for the BMW R1150GS during normal touring operations. The shock absorber type offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design and finely adjustable damping allow for a more precise adjustment and balance than is possible with the series components of motorcycle manufacturers. The spring preload can be adjusted with a tool to accommodate the large travel luggage. The damping adjustment of this Level1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW R1150GS.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW R1150GS is:=> Touratech Suspension shock absorber *front* for BMW R1150GS type *Level1* 01-040-5877-0=> When replacing only one component, optimal handling is not achieved.The equipment installed here with its adjustment options is sufficient if the suspension rarely needs to be adjusted for different loading conditions.Features of the Touratech Suspension Level1 shock absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings are installed in the shock absorber eye for the mounting screws. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us