Adjustable Footpeg Lowering Kit for BMW R100GS 92With the new footpeg adapter, no wish remains unfulfilled. We would like to point out that you can only install the adapters if you perform the drilling for the spring position on your peg yourself. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for 40 mm lowering. It is adjustable in increments of 4°. Generally, the basic adapter can be mounted upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position. The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.Please consider that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained.Includes parts certificate TÜV certificate (attached here).The parts certificate includes most motorcycle models. For motorcycles not listed there, an individual inspection can be conducted. The proper installation will be checked and confirmed. The inspection costs approximately €30.00. All items have been mounted and tested on original motorcycles - without any modifications.

TOURATECH Fernreisefußrasten * Works *, low, for BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS + Adventure by 2012, R80GS, R100GS, F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar, G650GS, G650GS Sertao item Description  Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).  The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide, boot-friendly, 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with a shot-blasted surface and laser engravingIncludes ABE.BMW F800GS: for all model years!