Adjustable Mono Shock Absorber Rear YSS for BMW F650GS G650GS
€492.37*
Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The adjustment tool is included in the delivery.
Angled USB-C Standard Plug, 12-24V / 5V, max. 3A Cigarette Lighter and Onboard Network Sockets
€29.90*
For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit
Badge - D = 27MM for example BMW R1200GS K25 RnineT F 650 700 800 GS 51142328447
€12.17*
Original BMW Spare Part
Additional Information
The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:
Badge - D=45MM e.g. for BMW R1100GS R1150GS F650 F650ST F650GS R90/6 K1200RS 52532325201
€18.26*
Original BMW Spare Part
Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS...
Additional Information
The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:
Badge - D=58MM for example BMW E36 R1200GS HP4Race R850R 51148164924
€48.71*
Original BMW Spare Part
Additional Information
The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:
Battery Charger JMP Skan 1.06/12V 1A for BMW Motorcycles
€37.97*
JMP Battery Charger Skan 1.0 Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage. Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4) Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery
Battery Charger Motorcycle JMP Skan 4.0 12V 1A-4A
€49.63*
JMP Battery Charger Skan 4.0 CAN-Bus Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage. Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4) Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)
BMW F 650 GS + Dakar CS G650GS Clutch Cable 32737661757
€49.04*
BMW F 650 GS + Dakar CS G650GS Clutch Cable
Clutch Cable 32737661757
Original BMW spare part.
Fits according to BMW part number in the following vehicles:
F 650 GS
F 650 GS Dakar
F 650 CS
G 650 GS
Price = including shipping within Germany!
BMW F 650 GS + Dakar G 650 GS + Sertao original BMW air filter insert
€24.42*
BMW Original Spare Part
Air Filter Insert
Top Brand Quality
BMW F650GS + Dakar R13 G650GS original BMW rear brake pads
€51.19*
Original BMW Spare Part
The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds.
We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to ensure optimal braking performance with minimal wear.
Additionally, the fastening parts on the brake calipers should be replaced regularly. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!
BMW F650GS F 650 GS Engine Guard Crash Bar Crashpad silver G650GS
€279.50*
Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available.
protects against falls and crashes
helpful for securing the motorcycle
high-quality metal coating
solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens
comprehensive and easy-to-understand installation instructions
Scope of delivery: right + left including mounting materials and instructions
any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes
no ABE or registration required
BMW F650GS F 650 GS luggage carrier luggage case side carrier silver G650GS
€329.50*
The permanently bolted side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the legs of the rider or passenger in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes.
Construction from steel tubing MADE IN GERMANY
Permanently bolted to the motorcycle frame
Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions)
Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product)
Recommended load: 10kg in each side case (please note model-specific information from the motorcycle manufacturers or instructions in the installation manual)
Scope of delivery: right + left including mounting materials and instructions
Luggage systems generally do not require ABE or registration
Vehicle-specific notes: Side case recommendations: Junior 30, Alu-Exclusiv 30, Alu-Standard 35, Xplorer 30.
BMW F650GS F 650 GS luggage rack luggage carrier top case carrier silver G650GS
€197.00*
BMW F 650 GS F650GS G650GS G 650 GS
Luggage rack silver
The facts in pipe construction: • highest safety - especially developed for Hepco & Becker developed top case • Vehicle Development • Robust and elegant design • Precision fit, easy installation • Rotating attachment for luggage straps • metal pipe from a German steel forge • High-quality metal coating • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not suitable for hand luggage!
Vehicle-specific information: The luggage rack is mounted on the original bridge.
( Example Picture)
BMW G650GS Sertao Engine Guard Crash Bar Crashpad black G 650 GS
€274.50*
Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle a unique character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available.
protects against falls and crashes
helpful for securing the motorcycle
high-quality metal coating
solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens
comprehensive and easy-to-understand installation instructions
Scope of delivery: right + left including mounting materials and instructions
any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes
no ABE or registration is required
BMW G650GS Sertao engine guard engine spoiler underrun protection G 650 GS
€249.50*
Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle, but also emphasize the off-road look.
effective protection against stone chips and runovers
high-quality technical processing
made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens
3-4mm thick
custom-fit manufacturing, adapted to the shape of the motorcycle
includes mounting kit and easy-to-understand instructions
please refer to the installation instructions and model-specific notes for any potential restrictions
BMW G650GS Sertao luggage carrier lock holder black G 650 GS
€344.50*
Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the specific motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms.
sturdy construction MADE IN GERMANY
quickly removable, only inconspicuous small tabs remain on the motorcycle
high-quality surface finish
generally easy assembly, please refer to the provided assembly instructions
Scope of delivery: right + left including mounting materials and assembly instructions
for any restrictions, please refer to the vehicle-specific notes or the assembly instructions
Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.)
Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.)
Luggage systems generally do not require ABE or registration
BMW G650GS Sertao luggage rack luggage carrier top case carrier silver G 650 GS
€197.00*
Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The basic mounting has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are made specifically for each model and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With high-quality coating and proper care, the look is also maintained in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension.
Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag.
usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions)
including mounting materials and instructions
MADE IN GERMANY
the topcase is pushed onto the tube luggage rack and locked with a metal retaining lock on the carrier
Luggage racks generally do not require ABE or registration
Vehicle-specific notes: Our luggage rack is mounted on the original rack. The topcases equipped with a metal retaining lock from HEPCO&BECKER can be attached to it.
BMW Liquid Gasket Loctite 5970 A10 50ml (29.49 € / 100 ml) 83190404517
€25.50*
Product Description:
original BMW workshop equipment
Contents 50 ml
29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany)
Safety data sheet available upon request
May cause allergic reactions
For professional users only
BMW Lubricant Grease Straburags (39.90 € / 100 grams) for Cardan Footrest Joints Gear Shift
€22.50*
BMW Lubricant Grease Straburags for
Cardan Footpeg Joints Shift Parts
Product Description:
original BMW workshop equipment
has been used for many years for e.g. cardan shafts, plug connections, joints
strongly adhesive
good corrosion protection
prevents tribocorrosion (combined effect of corrosion and wear)
water-resistant - even under outdoor conditions
approved by Knorr Brake N
(12006-1.23 product info available)
safety data sheet available upon request
contains Pin-2(3)-enes. May cause allergic reactions
content 50g
39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)
BMW original repair connector 3-pole 83300413586 e.g. R1200GS LC R nineT K1600GT C1 R1150GS
€14.95*
BMW Original Repair Connector 3-Pole
No. 611657
Item Description
This offer includes 1 repair connector 3-pole.
This offer applies to the red marked connector!!!
( Illustration No. 7 )
BMW Part Number: 83300413586
Fits various BMW motorcycles:
BMW Original Repair Connector 4-Pole 83300402340 e.g. R1200GS LC R nineT K1600GT C1 R1150GS
€16.95*
BMW Original Repair Connector 4-Pole
No. 610615
Item Description
This offer includes 1 repair connector 4-pole.
This offer applies to the red marked connector!!!
( Illustration No. 5 )
BMW Part Number: 83300402340
Fits according to part number for the following vehicles:
K50 (R 1200 GS) (10/2011 — 10/2016)
K51 (R 1200 GS Adventure) (09/2012 — 10/2016)
K52 (R 1200 RT) (01/2013 — 10/2016)
K53 (R 1200 R) (11/2013 — 10/2016)
K54 (R 1200 RS) (06/2014 — 10/2016)
K25 (R 1200 GS) (12/2002 — 12/2012)
K25 (R 1200 GS Adventure) (03/2005 — 07/2013)
K25 (HP) (08/2004 — 11/2008)
K26 (R 900 RT, R 1200 RT) (11/2003 — 06/2014)
K27 (R 1200 R) (11/2005 — 07/2014)
K28 (R 1200 ST) (05/2003 — 11/2007)
K29 (R 1200 S, HP2 Sport) (11/2004 — 07/2010)
K21 (R nineT) (01/2013 — 08/2016)
K23 (R nineT Scrambler) (09/2015 — 10/2016)
K40 (K 1200 S, K 1300 S) (04/2003 — 09/2015)
K43 (K 1200 R, Sport, K 1300 R) (03/2004 — 07/2015)
K44 (K 1200 GT, K 1300 GT) (11/2004 — 10/2010)
K42 (HP4) (09/2011 — 07/2014)
K46 (S 1000 RR) (09/2008 — 10/2016)
K47 (S 1000 R) (02/2013 — 07/2016)
K49 (S 1000 XR) (05/2014 — 09/2016)
K48 (K 1600 GT, K 1600 GTL) (01/2010 — 10/2016)
K70 (F 700 GS) (06/2011 — 10/2016)
K71 (F 800 S, F 800 ST, F800GT) (12/2004 — 09/2016)
K72 (F 650 GS, F 800 GS) (10/2006 — 10/2016)
K75 (F 800 GS Adventure) (05/2012 — 10/2016)
K73 (F 800 R) (12/2005 — 09/2016)
R13 (F 650 GS, GS Dakar) (02/1999 — 10/2007)
K14 (F 650 CS) (11/2000 — 07/2005)
K18 (C 600 Sport, C 650 Sport) (02/2011 — 10/2016)
K19 (C 650 GT) (01/2011 — 10/2016)
R13 (G 650 GS) (02/2008 — 10/2015)
R13 (G 650 GS Sertão) (07/2010 — 11/2014)
259 (R 850 GS, R 1100 GS) (04/1993 — 07/2006)
R21 (R 1150 GS) (09/1998 — 11/2003)
R21 (R 1150 GS Adventure) (07/2001 — 09/2005)
259R (R 850 R, R 1100 R) (09/1993 — 11/2002)
259 (R 850 RT, R 1100 RT) (05/1994 — 11/2001)
R28 (R 850 R, R 1150 R, Rockster) (11/1999 — 07/2007)
R22 (R 850 RT, R 1150 RT, R 1150 RS) (01/2000 — 03/2006)
259C (R 850 C, R 1200 C) (04/1996 — 07/2004)
259 (R 1100 S, R 1100 RS) (01/1992 — 07/2005)
259C (R 1200 C Montauk) (10/2002 — 10/2004)
259C (R 1200 C Independent) (05/2000 — 08/2004)
K30 (R1200 CL) (10/2001 — 07/2004)
K589 (K 1100 RS, K 1100 LT) (06/1989 — 04/1999)
K589 (K 1200 RS, K 1200 LT) (04/1996 — 07/2008)
K41 (K 1200 GT, K 1200 RS) (03/2000 — 07/2005)
C1 (10/1999 — 04/2003)
BMW R1200GS F 650 700 800 GS Hinge Axis Case Side Case New G650GS
€10.00*
New! 2 pieces
BMW part number: 71607660615
Fits the following vehicles according to the part number:
C-Bow Seitenträger schwarz für BMW G 650 GS (2011-2016)/Sertao (2012-2016)/F 650 GS/Dakar (-2007)
€219.50*
C-Bow Seitentaschenhalter für BMW G 650 GS (2011-2016)/Sertao (2012-2016)/F 650 GS/Dakar (-2007) ist für die Aufnahme einer Vielzahl von Hepco&Becker Taschen vorgesehen. Softbags für sportlich-dynamische Motorräder und Satteltaschen für Chopper und Cruiser können mit dem C-Bow Halter am Motorrad befestigt werden. Sein elegantes, unaufdringliches Design fügt sich perfekt in die Gesamtlinie des Fahrzeugs ein. Natürlich hält er die Satteltaschen sicher vom heißen Auspufftopf fern. Dank moderner C-Bow Technik lassen sich die passenden Taschen einfach und unkompliziert mit nur einem Klick am C-Bow befestigen und diebstahlsicher verriegeln. Die Taschen sind sicher am Motorrad befestigt und bleiben auch bei Beladung in Position. Bei vielen Modellen verbleiben die Blinker in ihrer Originalposition. Weitere Informationen finden Sie in der Anbauanleitung.solider Seitenträger zur Aufnahme von Hepco&Becker C-Bow Seitentaschen und Koffernhochwertiges Oberflächenfinishnormale Hepco&Becker Hartschalenkoffer, wie die Junior oder Journey passen nicht!Krauser K-Wing Koffer passen nicht an den C-Bow Träger!Empfohlene Zuladung: 5kg je Tasche/Koffer (bitte beachten Sie die Montageanleitung, fahrzeugspezifische Hinweise, sowie Motorradherstellerangaben für evtl. auftretende Einschränkungen)meist ohne Probleme mit Topcaseträger, Sissybar, oder Solorack kombinierbar (beachten Sie die Anbauanleitung oder die fahrzeugspezifischen Hinweise beim jeweiligen Träger)Gepäckbrückenverbreiterungen können die Taschenmontage am Träger einschränkenGepäckträger benötigen keine ABE oder Eintragung in die Papiere Lieferumfang: links, rechts, Anbaumaterial und AnleitungEntwickelt für den Serienzustand der Maschine. Nicht getestet mit Zubehörartikeln wie z.B: Auspuff, Kennzeichenhalter oder anderen Blinkern. Beachten Sie, dass die Taschen bei Fremdzubehör immer ausreichend Abstand zum Auspuff und die Blinker einen ausreichenden Abstrahlwinkel haben. Der Abgasstrahl darf nicht auf die Taschen gerichtet sein.
Combination lock for tank bag Luggage Bags Suitcases ...
€13.00*
For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag.
Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.
G650GS
Welcome to the category for BMW Adventure G650GS spare parts and accessories!
Here you will find a wide selection of high-quality spare parts and accessories for your motorcycle.
- High-quality spare parts for the BMW Adventure G650GS
- Diverse accessories for more comfort and safety
- Great prices and fast delivery
- Expert advice and support in choosing
Browse through our range and find the right parts for your motorcycle.
Order now and take advantage of our offers!