For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Lithium-Ion Batteries from JMT Fresh modern design and high-tech for your motorcycle. Spacer (S)The battery is equipped with one or more spacers that are glued under the battery with the included adhesive tape, ensuring the battery fits perfectly in the battery box. Waterproof (W)The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure. Indicator (I)All batteries are equipped with a battery status indicator.Simply press the test button; the red digital display shows the current voltage.When the voltage drops below 12.9 V, the battery needs to be charged. By replacing a standard lead-acid battery with a JMT lithium-ion battery, you can save up to 5 kg in weight with minimal effort. The following advantages speak for JMT lithium-ion batteries:- about 1/3 the weight of comparable lead-acid batteries- unbeatable cost/weight savings ratio- can be installed in any position, as no acid is contained- contains no heavy metals- balanced discharge/charge of all cells through balancer- fast charging with high current possible- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while lithium-ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance.A uniform charge state of all cells is also ensured by a built-in processor ("balancer").The dimensions of the lithium-ion batteries match those of the original lead-acid batteries with the help of adapters.The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments. Please note that only suitable chargers may be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below.Using a charger with a voltage of more than 14.9 V to charge a deeply discharged battery with less than 9.6 V is not permitted. The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius. TechnologyJMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing.This means they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process ensure the highest safety standards for lithium batteries. - 12 V maintenance-free lithium-ion battery- Recommended charging current 2A- Maximum charging current for fast charging 20A Comparable in dimensions and connections with:YTZ10SYT12B-BS    YT14B-BS YX14AH-BS YB10A-A2      YB12A-A      YB12A-BYB12B-B2       YB12C-A      YB14-A2 YB14-B2          YB14A-A1      YB14A-A2          12N12A-4A-1Technical Data:Voltage:   12v Capacity:   4 Ah (10 hrs)Energy Output:   48 WhType:   Lithium Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   280 ATesting Standard of Manufacturer:   SAE Length:   134 mmWidth:   65 mmHeight:   92 mmWeight Ready for Use:   1.1 kgConnection Type:   from above    from the front Positive Terminal:   front left Negative Terminal:   front right Manufacturer:   JMT

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

For the individual installation of this cigarette lighter socket, you can use the integrated mounting bracket and the included cable ties. If your handlebars do not provide enough space, simply use the included extra-narrow handlebar mount. Of course, installation in the fairing is also possible.The spring-loaded cover does not flap in the wind and provides weather protection. The 7.5 A fuse can be mounted freely at the most convenient point in the wiring. The small hole at the bottom of the housing prevents moisture from forming in the socket.- Compact design- Flat spring-loaded cover- Long connection cables: 1.3 m- Integrated holding bracket- Extra-narrow handlebar mount- Option for fairing installation (27 mm)- Includes 7.5 A fuse