Die Festscheiben der Brembo Oro-Serie werden in einem Guss aus Edelstahl hergestellt. Die Fertigung entspricht hierbei den strengen Toleranzen im Bezug auf die Konstruktions- und Bauart. Durch die Bearbeitungszyklen wird eine maximale Eignung und Rundlaufsicherheit gewährleistet.   Brembo konnte aufgrund seiner umfangreichen Erfahrung die geeigneten Formen, Toleranzen und Größen für jeden Motorradtyp und Einsatz bestimmen. Tatsächlich verbessert die spezielle Formgebung der Brembo-Scheiben durch eine sorgfältige Untersuchung der Bearbeitungstoleranzen die Übertragung des Bremsmoments und bietet gleichzeitig eine verbesserte Resistenz gegen mechanische und thermische Belastungen.

EBC brake discs. MADE IN UK.Ziel in the development is to improve the braking performance compared to the original brake disc. EBC used HPSR steel with a low carbon content, having a higher coefficient of friction by 18%. This steel is much more resistant to rust than cast steel. In addition, the entire surface with a 3-micron thick zinc coating is protected, which already abrades in the area of ​​the pad contact zone when decelerating. Only in this area Light surface rust can form on prolonged service life. The brake discs are drilled in the wings of a bird design to make do with as few holes as possible with optimum cleaning of the brake disc of rainwater and brake dust. The fewer holes are provided, the better the wet braking performance and the lower the wear. - Rigid Bremsscheibe.- Ground from rolled steel HPSR gefertigt.- with low carbon content with optimized braking surface hole pattern gebohrt.- radial. - Galvanized to protect against Korrosion.- EBC EBC Organic recommends brake pads or for sporty drivers EBC Double-H Sinterbremsklötze.- Independent design.

#VALUE!

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, enhances the transfer of braking torque while simultaneously providing improved resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   305 mmInner Diameter:   161 mmBolt Circle:   203 mmNumber of Holes:   5 Thickness:   5 mmManufacturer:   Brembo

All brake discs come with an ABE, also for scooters.   The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts.   All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel.   The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads.   A uniform temperature rise and fall allows for a constant pressure point.     A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours.   Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc RAC   - Notched outer contour with slotted brake edge - Available in rigid and floating variants - Coordinated design from front to rear axleTechnical Data:Outer diameter:   305 mmInner diameter:   181 mmBolt circle:   203 mmNumber of holes:   5 Hole diameter:   8.4 mmThickness:   4.5 mmDesign:   rigid Manufacturer:   TRW

This is a used part being offered Vehicle: R1200S Manufacturer: BMW Condition: normal signs of use Description: sold as shown Part number: 34217664103

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut stainless steel effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.

Especially when riding off-road, it is extremely important to always have a secure footing on the brake. With our enlarged support, the boot always finds its way to the lever, and the controllability is noticeably improved.Material: high-quality stainless steel