Fork

Simmerring and Dust Cap from SKF:- Less friction (approx. -20%) compared to conventional sealing rings- Use of a self-lubricating material- Less stick-slip - (Stick-slip = breakaway force caused by static friction)- Significantly improved sealing effect - Less air entry into the fork- Less dirt entry into the fork - thus less wear on sliding bushings and oil - thus maintaining the optimal sliding properties of the fork- Increased long-term tightness - Excellent water, dirt, and air tightness. UV resistantDimensions:Fork sealing ring Ø43 x 52.9 x 9.5mm / Wiper Ø43 x 53.4 x 5.8 mmScope of delivery:1 piece sealing ring1 piece dust cap(Two sets are required for a complete fork)

Steering Head Bearing Seal

These progressive fork springs are perfectly tuned to the requirements of the fork for the BMW F800GS. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *BMW F800GS from 2013*The fork springs can be used with or without ESA equipment.For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.Do you have further questions? We are happy to advise you personally, please contact usDelivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the glide properties of the fork tubes.

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of 50mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS / Adventure and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for *BMW F800GS / Adventure*The replacement springs can be used with or without ESA equipment.For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the BMW F800GS / Adventure are:=> Touratech Suspension shock absorber *rear* BMW F800GS *lowering* 01-048-5864-0=> Touratech Suspension shock absorber *rear* BMW F800GS Adventure *lowering* 01-048-5884-0=> When replacing only one component, optimal handling is not achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Note:For the safe stand of your BMW F800GS after lowering, we recommend the shortened side stand and/or optionally the shortened center stand. These components can be obtained from your BMW dealer.

These progressive replacement springs are perfectly matched to the fork and shock absorber of the BMW F800GS. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.The replacement springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.