Angeboten wird hier ein Gebrauchtteil Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, AbschürfungenTeilenummer:46718409415 Fahrzeug: K80 F750GS / F800GSK81 F850GS /  F900GS SF

Footpeg Lowering Kit for the Passenger for your BMW F650GS, F700GS, F750GS, and F800GSincluding ABE With the new footpeg adapter for your BMW, no wish remains unfulfilled. The optimal leg angle is 90°. A bent leg angle also compresses the blood vessels, which does not supply the leg with enough oxygen. This can lead to the dreaded varicose veins.With the adapter, the peg is positioned 50 mm lower and 30 mm forward. In general, the base adapter can be mounted up or down.This allows you to achieve a natural ergonomics and a healthier sitting position.Depending on the setting, the passenger achieves a healthy and comfortable leg position. Available in silver and black.Please select when ordering.Please consider that lowering the footpeg also means less lean angle. The advantage of the adapters is that the original footpeg is retained.All items have been mounted and tested on original motorcycles - without any modifications.

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which is particularly advantageous when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving characterizes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with shot-blasted surface and laser engravingIncludes ABE. (Extension for BMW F900GS in preparation)

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which is particularly advantageous when navigating deep ruts compared to regular enduro footpegs or standard products.The footpegs are 20 mm lower than the original pegs (without rubber insert).The Touratech Works footpegs have been specifically reinforced at the mount and are therefore significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving characterizes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mount- refined with shot-blasted surface and laser engravingIncludes ABE. (Extension for F900GS in preparation)