Touratech Side Stand Enlarger for BMW F700GS
Product number:
1021-01-048-5276-0
Product information "Touratech Side Stand Enlarger for BMW F700GS"
A well-known problem that has cost most motorcyclists their last nerve! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.
Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.
Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.
| Baugruppe: | Frame |
|---|---|
| Marke: | BMW |
| Modell: | F700GS |
Login
Similar Items
Touratech Brake Lever Extension BMW F800GS F700GS F650GS Twin
€44.90*
Especially when riding off-road, it is extremely important to always have a secure footing on the brake. With our enlarged support, the boot always finds its way to the lever, and the controllability is noticeably improved.Material: high-quality stainless steelBMW F800GS: for all model years!
Touratech Long-Distance Footpegs Works for BMW R80GS R100GS R1100GS R1150GS + Adventure
€149.90*
Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide, boot-friendly, 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with a shot-blasted surface and laser engravingIncludes ABE.BMW F800GS: for all model years!
Fernreisefußrasten *Works*, niedrig, für BMW R1150GS, R1200GS + Adventure (-2012), R80GS, F800GS
€149.90*
TOURATECH Fernreisefußrasten * Works *, low, for
BMW R850GS, R1100GS, R1150GS, R1150GS Adventure,
R1200GS + Adventure by 2012,
R80GS, R100GS,
F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar,
G650GS, G650GS Sertao
item Description
Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).
The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!
Touratech Long-Distance Footpegs Works BMW F800GS + Adventure F700GS F650GS Twin
€139.90*
Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with shot-blasted surface and laser engraving