EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

  Brembo brake discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the break-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Galvanized for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design. Technical Data:Outer Diameter:   240 mmInner Diameter:   110.2 mmBolt Circle:   124 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   rigid Manufacturer:   EBC

Standard Pad Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

EBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen , RostTeilenummer: 35212345682

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen , RostTeilenummer: 35212345682

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, KratzerTeilenummer:34112345319 

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Rost, Stärke: 4,9mm (Grenze: 4,5mm)Teilenummer: 34212345323

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   300 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: normale GebrauchsspurenBeschreibung: wird verkauft wie abgebildetTeilenummer: 34312345311

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has matched the materials of the brake disc and brake pad to each other. This means optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be regularly replaced. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and roundness accuracy are ensured. Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, enhances the transfer of braking torque while simultaneously providing improved resistance to mechanical and thermal stresses.

SV - Friction MaterialFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only available as a replacement for sintered materials in the original equipment.Only conditionally suitable for motorsport, as it has no heat resistance above 400 degrees.Only suitable for the front axle.